Jiangxi W132 Magnetic Watch Charger Power Bank User Manual
- June 17, 2024
- Jiangxi
Table of Contents
Jiangxi W132 Magnetic Watch Charger Power Bank User Manual
Packing list
Power display.
Press the on/off button, and the LED light turns on and displays the current power level (as shown below)
LED light display| | | |
---|---|---|---|---
batteries| 100%| 75%| 50%| 25%
Specification
Model: W132
Watch: 2.5W
Li-Battery Capacity: 1000mAh
Input: 5V-1A
Material: Aluminum alloy + PC
Start up:
Press the on/off button, the LED light will display the current battery level, and the product will enter the power-on state and can charge other devices. During the charging process, the LED displays the current remaining power. If the product is turned on without charging other devices for 30 seconds, the LED will turn off and the product will enter the micro-power standby state.
Compatibility
Smartwatch
Work For Apple Watch: Hermes/Nike/Ultra 2/Ultra/9/8/7/6/54/3/2/1/SE
How to use the product
Place the watch in the wireless charging position and align it with the
magnet, and the magnet will cause it to snap into place automatically and
start charging.
Warm Tips
Please pay attention to the following items, otherwise it may cause failures like irregular charging, over-heated charging, intermittent charging, or even no charging.
- For the first time use, please fully charge this product.
- When charging this product or using this product to charge other devices, please choose an appropriate charger and data cable.
