Shenzhen Fowke Innovation Technology Co Ltd UHD4K Bulk buy Dual Lens 4K 30fps 48MP WiFi Remote Control Digital User Manual

Hazards, Safety and Warnings

FCC Warning Statement
Changes  or  modifications  not  expressly  approved  by  the  party responsible  for  compliance  could  void  the  user’s  authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B  digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy  and,  if  not  installed  and  used  in accordance  with  the  instructions,  may  cause  harmful  interference  to radio  communications.  However,  there  is  no  guarantee  that  interference will  not  occur  in  a  particular  installation.  If  this  equipment does cause harmful  interference to  radio or  television reception, which can be determined by  turning the  equipment  off  and  on,  the  user  is encouraged  to  try  to  correct  the  interference  by  one  or  more  of the  following  measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device  may not cause harmful interference, and  (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. Thedevice can be used in portable exposure condition without restriction.
Misuse of the camera and accessories may damage the camera and possibly cause an accident.
Please read carefully and refer to the instruction manual, please keep this instruction manual.
This chapter contains important contents, violation of which may cause accidents such as fire, or cause personal injury.
Do not allow children to use the camera and accessories alone.
fire and electric shock

• If the camera is damaged, flooded or short-circuited, please turn off the camera immediately and take out the battery.
• Use the external power supply correctly, keep it dry and ventilated, and do not cover it.
• Do not use an external power supply during thunder or lightning, otherwise it may damage the camera and cause electric shock or fire.

About the battery
Batteries are chemicals and misuse may cause fire or accident.

• Use a qualified battery, and put it into the camera correctly according to the mark.
• Do not use swollen or leaking batteries.
• Do not short-circuit, impact, squeeze, puncture, disassemble or incinerate the battery.
• Do not store or use at high temperature.

About the LCD screen

• The LCD screen is fragile, and it is forbidden to beat, squeeze or knock it.
• If the screen is broken, do not touch it. In case of accidental contact, rinse with clean water immediately. If swallowed, rinse mouth immediately and drink plenty of water, seek medical attention immediately.

Precautions for use and storage

• Do not drop, hit or puncture the camera.
• Do not let the LED lights shine directly on the human eyes, strong light may damage eyesight.
• Do not use corrosive solvents to clean the camera and accessories.
• When not in use for a long time, please take out the battery and put it in a dry place.
• The camera has no parts that users can repair by themselves, and it is forbidden to disassemble or repair by themselves. In case of failure, please find a professional or dealer for repair. Self-disassembly will void the warranty.

Environmental requirements

• Using environment: temperature -10℃~40℃.
• Storage environment: temperature -20℃~60℃, humidity≦50%.
• It is forbidden to use or store in the environment with strong vibration and dust.

Waste disposal

• It is forbidden to throw away the camera and accessories at will. Please dispose of waste according to local laws.

Other warnings

• If the camera has wireless functions such as 4G, WiFi or Bluetooth, please use it in a place with good signal. This camera may interfere with aircraft, medical equipment, etc. Do not use it in prohibited places.
• Please abide by the local laws and regulations on the use of wireless devices.
• Please abide by local laws and regulations on personal privacy protection.

Check before use

• To ensure your interests, before using the camera, please install the battery and memory card for trial shooting inspection.
• We are not responsible for additional losses caused by improper use or camera failure.

Copyright and Trademark
Microsoft/windows is a registered trademark of Microsoft Corporation.
Pentium is a registered trademark of Intel Corporation.
Macintosh/Mac OS/iOS are registered trademarks of Apple Inc.
Android is a registered trademark of Google Inc.
Referenced product names, proper nouns or trademarks are registered trademarks of their respective owners.
About the manual
The pictures are for reference only. We try our best to keep the content correct. If the product is updated, please refer to the actual product.
In order to improve the user experience, the APP may be upgraded, please use it according to the actual situation without prior notice.
We reserve all rights to this manual. Any unit or individual shall not reproduce or disseminate without our consent.
Thanks for choosing this product!
This is a 4K UHD digital video camera that supports WiFi, with the following features:

• Dual lens simultaneous video recording
• 4K UHD video
• 3.0-inch IPS high-definition touch screen
• Time-lapse video Loop recording
• Slow motion recording WiFi, mobile APP operation
• IR remote controlOIR night vision
• Support external microphone
• Support up to 128GB SD card

1.1 Computer System Requirements
When using the camera with a computer, the computer must not fall below the following specifications:
CORE i3/3.0G or above processor/Windows XP or above operating system
8GB or more memory/2GB or more graphics card/500GB or more available disk space
Standard USB2.0 or higher interface/1920x 1080 pixel or higher screen resolution.
If the computer specification is low, it may not work properly when connected to the camera.
1.2 Diagrams of the camera 1.3 Description of button functions

off. After powering on, short press to Turn On/Off the IR night vision and switch the Fill light.

| MENU| Enter the control Menu / Return (without saving)
| OK| Confirm operation
| UP| Move Forward (Up)
Video playback mode: Fast Rewind
| DOWN| Move Down
Video playback mode: Fast Forward
| MODE| Switch   working   mode:   Video   mode/Photo   mode ( stands for Video mode, stands for Photo mode)
| PHOTO| Photo mode: press Lightly to Focus, press Firmly to Take pictures
| Rec| Video mode: Record video/Stop recording video Video playback mode: Play/Stop
| W/T| Photo/video mode: Zoom, zoom in/zoom out
Video playback mode: adjust the volume when playing video

Note: The place with <> means a button or switch of the camera.

Start using

2.1 Insert a memory card
It needs to insert a memory card into the camera, please follow the steps to insert the memory card, as shown in the figure.
2.1.1. Open the memory card cover. Insert the memory card in the direction shown in the picture, and push until you hear a “click”.
2.1.2. Close the memory card cover. 
Open the memory card cover in the direction of the arrow

Insert the memory card in the direction of the arrow Notice:
Use a qualified memory card with a card speed no lower than Class 10.
When using a new memory card, please format it with the camera.
Do not insert or remove the memory card during work, as this will damage the memory card or lose data.
Some memory cards may cause the camera to freeze or work abnormally, please pay attention to whether it is compatible.
2.2 Insert a battery
The camera uses an external embedded lithium-ion battery, please assemble it correctly before use, as shown in the figure below.
2.2.1. Check the direction of the metal contacts of the battery, and put the contacts in the upward direction, and put the battery in.
2.2.2. Push the battery from bottom to top in the direction of the arrow indicated by the battery groove until a “click” sound is heard, and the assembly is complete.
Notice: Please assemble the battery correctly, otherwise the camera will not be able to turn on or be damaged if installed incorrectly.
Unqualified lithium batteries and power adapters are prohibited.
2.3 Charge the battery
2.3.1 Insert the battery, connect the camera and the power adapter with a USB cable, and connect the power adapter to the mains. The camera charging indicator “CHG” is on, indicating that it is charging, and the indicator light will go out after charging is completed.
2.3.2 It can also be connected to a computer to charge the camera. Insert the battery, and connect the camera to the USB interface of the computer with a USB cable. The camera charging indicator “CHG” is on, indicating that it is charging, and the indicator light will go out after charging is completed. When using the computer to charge the camera, please turn off the camera first, which can save charging time.
2.3.3 Specifications of power adapter: input AC 100~240V/50~60HZ, output DC 5V/2A. Please confirm the local power supply specification before use.
2.3.4 Shoot while charging. In order to adapt to long-term shooting, the camera supports recording while charging. When using this function, please use the power adapter to power the camera. After connecting according to the steps in 2.3.1, turn on the camera to shoot. When using this function, it is forbidden to use computer power supply, otherwise the computer may be damaged!
Notice:
Before using the mains to charge, you must confirm that the local power supply specifications meet the requirements! Please ensure ventilation during the charging process, and it is forbidden to cover the machine with any objects. After charging is complete, remove the power source as soon as possible!
2.4 Turn the camera on and off
2.4.1. Insert the battery, short press to turn on the camera
2.4.2. In the power-on state, press and hold the to turn off the power of the camera.
2.4.3. The camera supports turning on the screen and shutting down when the screen is closed. Open the screen to automatically power on, close the screen to automatically power off.
2.4.4. Automatic shutdown. When not in use for a long time, the camera will automatically shut down to save power.
When the power is low, the screen will display “Battery Low” and it will shut down automatically.
2.5 Change working mode
2.5.1 The camera supports three working modes and one setting mode:
Video recording mode: The icon ” ” is displayed on the upper left corner of the screen, and you can record video and set related parameters at this time.
Photo mode: The icon ” ” is displayed on the upper left corner of the screen, and you can take photos and set related parameters at this time.
Playback mode: Play back photos/video files and perform related operations.
Setting mode: touch the screen, there is a “ ” icon at the bottom right of the screen–to change pictures, this mode can set the system parameters of the camera.
2.5.2 Change working mode
Press the key to switch the working mode: video recording mode/photographing mode, and the icons of each mode will be displayed in the upper left corner of the screen.
2.6Use the Remote control
The camera can be operated by the remote control, and the functions of the remote control buttons are as follows:

Icon

| Button name|

Function Description

---|---|---
| PHOTO| Take pictures in photo mode
| VIDEO| Record a video/Stop Video recording in Video Mode
| MENU| Enter the menu in each mode
| MODE| Change Video mode/ Photo mode/ Playback mode
| PLAYBACK| Enter Playback mode
| UP/LED light| In the Menu: Up
Playback mode: Page Forward
Video/Photo mode: Turn On/Off IR night vision light/Rill light
| PLAY/STOP| Playback mode：Play/Stop playing while playing back a video
In the Menu: Confirm
| DOWN| In the Menu: Down
Playback mode: Page Backward
| WiFi| Video/Photo mode: Turn On/Off WiFi
| ZOOM IN| Video mode/Photo mode: Zoom In
Playback mode: Fast Forward while playing recorded video
| ZOOM OUT| Video mode/Photo mode: Zoom Out
Playback mode: Fast Rewind when playing recorded video

Notice:
Before using the remote control, please remove the battery protection sheet of the remote control.
When using the remote control, aim the remote control at the remote control receiver and prevent objects from blocking it. 2.7 Connect to a computer
The camera can be connected to a computer to transfer files, view and edit videos and photos.
2.8 Connect to a TV
The camera can be connected to a TV for use.
2.8.1. Connect the HD port of the camera to the HD port of the TV with a HD cable.
2.8.2. Switch the HD interface of the TV to the current interface.
2.8.3. Turn on and operate the camera, and all the content will be displayed on the TV, as shown in the figure.

2.9 Use an external microphone (optional accessory, non-standard configuration)
The camera supports using an external microphone. Using an external microphone can effectively reduce ambient noise and improve sound quality.
2.9.1.Before use, please read the instructions and precautions of the external microphone carefully to avoid damage to the camera.
2.9.2. Mount the external microphone as shown in the figure, and tighten the fixing nut.
2.9.3.Plug the 3.5mm connector of the external microphone into the MIC port and turn on the microphone switch. Notice:
Output impedance of external microphone: 0.2KQ~2.2KQ, due to the difference in the parameters of external microphones, please select according to the actual adaptation.
2.10 Use Zoom Function
The camera has a zoom function. In Video/Photo mode, slide the <W/T> to T to zoom in on the object (enlarge the scene), and slide the <W/T> to W to zoom out the object (zoom out the scene).
2.11 Use IR night vision or Turn on Fill light
2.11.1 The camera supports infrared night vision, which can take photos or record videos in dark environments.
2.11.2 In Video or Photo mode, short press <POWER/LED> to enter the night vision mode, and the night vision icon will be displayed on the upper left of the screen. In night vision mode, The screen is displayed in black and white, and only black and white photos or videos can be taken or recorded.
2.11.3 Short press <POWER/LED> again to tum on the Fill light, and the screen is displayed in color.
2.11.4 Press <POWER/LED>for the third time to return to normal mode.
Notice:
The IR night vision mode can be used in Photo/Video mode, and and the infrared lightcan be turned on or off during video recording.
In setup mode or playback mode, the operation of fill light/infrared light is invalid.

Use the camera

This chapter helps you understand and use various advanced functions of the camera.
3.1 Video Mode
The camera automatically enters the video mode after it is turned on, and all operations in this chapter are performed in the video mode.
In video mode, the screen displays as follows:

3.1.1 Record video
In video mode, users can record video. You can also set the menu items to help record better videos, the operation is as follows.
3.1.1.1. Correctly insert the memory card, install the battery, and short press <POWER/LED> to start the camera; the camera has an automatic power-on function when the screen is turned on.
3.1.1.2. After the camera is turned on, it will automatically enter Video mode, or press to switch to Video mode from other modes, and the icon “ ” will appear on the upper left corner of the display screen.
3.1.1.3. Refer to the image displayed on the screen to select and adjust the target to be photographed, hold the camera steady, and press to start shooting.
3.1.1.4. During the recording process, a red icon flashes on the upper left of the screen.
3.1.1.5. If the memory card is full, the screen will display “MEMORY FULL “and the recording will end automatically. In this case, you need to replace a new memory card, or delete the files in this memory card to continue recording.
3.1.2 Dual Record
Set the display style of the front and rear cameras on the screen, the default is “Picture-in-Pincture1”: the picture of the rear camera is displayed in the upper left corner of the preview screen of the front camera. Select “Picture- in-Pincture2”: the picture of the front camera is displayed in the upper left corner of the preview picture of the rear camera. Select “Front”: the front camera is displayed in full screen.
3.1.2.1. In Video mode, press