ICY BOX IB-HUB1413-CR USB 3.0 Type-C USB Hub with 3 USB Ports And Dual Card Reader Installation Guide
- June 16, 2024
- ICY BOX
Table of Contents
ICY BOX IB-HUB1413-CR USB 3.0 Type-C USB Hub with 3 USB Ports And Dual
Card Reader
Product Information
Specifications
- USB 3.0 Type-C interface to host computer
- SD 3.0 (UHS-I) card reader up to 100 MB/s
- microSD 3.0 (UHS-I) card reader up to 100 MB/s
- USB 3.0 Type-C interface up to 5 Gbit/s
- USB 3.0 Type-A interface up to 5 Gbit/s
- USB 3.0 Type-A interface up to 5 Gbit/s
FAQ
- Q: Where can I find support for this product?
- A: If you have any questions, please do not hesitate to contact our support at support@raidsonic.de or visit our website at www.raidsonic.de
Product Overview
- USB 3.0 Type-C™ interface to host computer
- SD 3.0 (UHS-I) card reader up to 100 MB/s
- microSD 3.0 (UHS-I) card reader up to 100 MB/s
- USB 3.0 Type-C™ interface up to 5 Gbit/s
- USB 3.0 Type-A interface up to 5 Gbit/s
- USB 3.0 Type-A interface up to 5 Gbit/s
Safety information
Please read carefully the following information to prevent injuries, damage to material and device as well as data loss:
Warning levels
Signal words and safety codes indicate the warning level and provide immediate information in terms of the probability of occurrence as well as the type and severity of the consequences if the measures to prevent hazards are not complied with.
- DANGER: Warns of a directly hazardous situation causing death or serious injury.
- WARNING: Warns of a potentially hazardous situation that may cause death or serious injury.
- CAUTION: Warns of a potentially hazardous situation that may cause minor injury.
- IMPORTANT: Warns of a potential situation that may cause material or environmental damage and disrupt operative processes.
Risk of electrical shock
WARNING: Contact with parts conducting electricity
Risk of death by electrical shock
- Read the operating instructions prior to use
- Make sure the device has been de-energised prior to working on it
- Do not remove contact protection panels
- Avoid contact with conducting parts
- Do not bring plug contacts in contact with pointed and metal objects
- Use in intended environments only
- Operate the device using a power unit meeting the specifications of the type plate only!
- Keep the device/power unit away from humidity, liquid, vapour and dust
- Do not modify the device
- Do not connect the device during thunderstorms
- Approach specialist retailers if you require repairs
Hazards during assembly (if intended)
_ CAUTION: _Sharp components
Potential injuries to fingers or hands during assembly (if intended)
- Read the operating instructions prior to assembly
- Avoid coming into contact with sharp edges or pointed components
- Do not force components together
- Use suitable tools
- Use potentially enclosed accessories and tools only
Hazards caused by a development of heat
IMPORTANT: Insufficient device/power unit ventilation
Overheating and failure of the device/power unit
- Prevent externally heating up components and ensure an exchange of air
- Do not cover the fan outlet and passive cooling elements
- Avoid direct sunlight on the device/power unit
- Guarantee sufficient ambient air for the device/power unit
- Do not place objects on the device/power unit
Hazards caused by very small parts and packaging
_ WARNING: _Risk of suffocation
Risk of death by suffocation or swallowing
- Keep small parts and accessories away from children
- Store/dispose of plastic bags and packaging in an area that is inaccessible to children
- Do not hand over small parts and packaging to children
Potential data loss
_ IMPORTANT: _Data lost during commissioning
Potentially irreversible data loss
- Always comply with the information in the operating instructions/quick installation guide
- Exclusively use the product once the specifications have been met
- Back up data prior to commissioning
- Back up data prior to connecting new hardware
- Use accessories enclosed with the product
Cleaning the device
IMPORTANT: Harmful cleaning agents
Scratches, discolouration, damage caused by moisture or short circuit in the device
- Disconnect the device prior to cleaning
- Aggressive or intense cleaning agents and solvents are unsuitable
- Make sure there is no residual moisture after cleaning
- We recommend cleaning devices using a dry, anti-static cloth
Disposing of the device
IMPORTANT: Environmental pollution, unsuitable for recycling
Potential environmental pollution caused by components, recycling circle interrupted
This icon on product and packaging indicates that this product must not be disposed of as part of domestic waste. In compliance with the Waste Electrical and Electronic Equipment Directive (WEEE) this electrical device and potentially included batteries must not be disposed of in conventional, domestic waste or recycling waste. If you would like to dispose of this product and potentially included batteries, please return it to the retailer or your local waste disposal and recycling point.
If you have any questions, please do not hesitate to contact our support at support@raidsonic.de or visit our website at www.raidsonic.de.
Important product information
Dear customer,
please note the following information about the compatibility of USB Type-C™ hubs and adapters, including this device!
- Your host computer must have a USB Type C™ interface.
- The IB-HUB1413-CR also works with computers and notebooks with USB 3.0/2.0/1.1 Type-A interfaces if the appropriate adapter is available.
- The hub also works on devices with the USB 3.1 (Gen2) and Thunderbolt™ 3 interface with the transfer rate of 5 Gbit/s specified by USB 3.0
- The Type-C™ interface can be connected with USB 2.0 standard in some notebooks and computers. The hub only supplies the full speed of 5 Gbit/s to USB 3.0 Type-C™ interfaces.
- The following operating systems are supported: Windows®, macOS®
Packing Content
- 1x IB-HUB1413-CR,
- 1x quick installation guide
Description
Modern notebooks usually have several USB Type-C™ ports, but no card readers and USB Type-A ports. The IB-HUB1413-CR has the most important of them on board, so that the familiar use of notebooks and computer continues to be so easy.
Key features
- 1x USB Type-C™ with transfer rates up to 5 Gbit/s
- 2x USB 3.0 Type-A (USB 3.0 downwards compatible to USB 2.0) with transfer rates up to 5 Gbit/s
- SD and microSD dual card reader (UHS-I) up to 100 MB/s
- Multi-LUN – allows the simultaneous use of two cards
- Supports HC-I and XC-I standards up to 2 TB
Usage
- Plug the IB-HUB1413-CR into the Type-C™ port of your host computer.
- After the IB-HUB1413-CR has been plugged in correctly the LED will turn on green!
- Connect your USB Type-C™, Type-A devices and supported memory cards* to the appropriate ports.
SD card
- Insert the SD card into the SD card slot with the bevelled corner in front of it.
- The golden pins of the card must be pointed upwards (if the ICY BOX logo is visible).
microSD card
- Insert the microSD card into the microSD card slot with the bevelled corner in front of it.
- The golden pins of the card must be pointed downwards (if the ICY BOX logo is visible).
© Copyright 2018 by RaidSonic Technology GmbH. All Rights Reserved
Apple and macOS, MAC, iTunes and Macintosh are registered trademarks of Apple
Computer Inc. Microsoft, Windows and the Windows logo are registered
trademarks of Microsoft Corporation.
The information contained in this manual is believed to be accurate and reliable. RaidSonic Technology GmbH assumes no responsibility for any errors contained in this manual. RaidSonic Technology GmbH reserves the right to make changes in the specifications and/or design of the above mentioned product without prior notice. The diagrams contained in this manual may also not fully represent the product that you are using and are there for illustration purposes only. RaidSonic Technology GmbH assumes no responsibility for any differences between the product mentioned in this manual and the product you may have.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>