ICY BOX IB-MS314-T Monitor Mount Instruction Manual
- June 16, 2024
- ICY BOX
Table of Contents
ICY BOX IB-MS314-T Monitor Mount
Product Information
Specifications:
- Weight Capacity: Up to 8kg (17.6lbs) per arm
- VESA Compatibility: 75x75mm and 100x100mm
- Maximum Extension: 32 inches
Product Usage Instructions:
Pre-Installation:
Before installing the product, ensure that you have received all the necessary parts mentioned in the component checklist. If any parts are missing or faulty, contact your place of purchase for a replacement.
Installation:
- Identify the different components:
- A (x1)
- B (x2)
- C (x2)
- D (x2)
- E (x1)
- F (x1)
- G (x1)
- 3mm (x1) H
- 6mm (x1) I
- M4x12 (x4) M-A
- M5x12 (x4) M-B
- D5 (x4) M-C
- Follow the provided installation diagram to assemble the components accordingly.
- Ensure that all connections are tightened securely.
- Attach the product to the desired location using the appropriate mounting hardware (not included).
Manual : IB-MS314-T
Usage:
Follow these guidelines for safe and proper usage of the product:
- Ensure that the product is securely mounted and stable before using it.
- Check the stability and safety of the product at regular intervals, preferably every three months.
- Do not exceed the rated weight capacity indicated for the product. Using it with heavier products may result in instability and possible injury.
Frequently Asked Questions (FAQ):
-
Q: What is the weight capacity of the product?
A: The product can support a weight of up to 8kg (17.6lbs) per arm. -
Q: What VESA sizes are compatible with the product?
A: The product is compatible with VESA sizes of 75x75mm and 100x100mm. -
Q: How far can the product extend?
A: The product has a maximum extension of 32 inches. -
Q: How often should I check the product for safety?
A: It is recommended to check the product for stability and safety at least every three months.
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
IMPORTANT:
Ensure that you nave received apart according to the compone ne chie kirst
prit al instal pen. it any parts are missing or faulty, contact your place of
purchase for a replacement.
MAINTENANCE
Check that the product is secure and safe to use at regular intervals (at least every three months).
PARTS
TOOLS REQUIRED
FEATURES
INSTALLATION
The information contained in this manual is believed to be accurate and
reliable. RaidSonic Technology GmbH assumes no responsibility for any errors
contained in this manual. RaidSonic Technology GmbH reserves the right to make
changes in the specifications and/or design of the above-mentioned product
without prior notice. The diagrams contained in this manual may also not fully
represent the product that you are using and are there for illustration
purposes only. RaidSonic Technology GmbH assumes no responsibility for any
differences between the product mentioned in this manual and the product
© Copyright 2019 by RaidSonic Technology GmbH. All Rights Reserved