iLIVING ILG8VF10 High Velocity Warehouse Fan Owner’s Manual

: June 16, 2024
: iLIVING

Table of Contents

iLIVING ILG8VF10 High Velocity Warehouse Fan
Specifications
BEFORE YOU BEGIN
GENERAL SAFETY INSTRUCTION
PRODUCT SPECIFICATIONS
IN THE BOX CONTENT
INSTALLATION AND OPERATION INSTRUCTION
MAINTENANCE
WARRANTY
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

iLIVING ILG8VF10 High Velocity Warehouse Fan

Specifications

Model| Impeller Size (in)| Volt (V)| Frequency (Hz)| Speed (RPM)| Power (W)| Air Flow (CFM)| Static (Pa)| Noise dB(A)
---|---|---|---|---|---|---|---|---
ILG8VF10| 10| 120| 60| 3450| 350| 1942| 350| 66
ILG8VF12| 12| 120| 60| 3450| 550| 2720| 450| 69
ILG8VF16| 16| 120| 60| 3450| 1200| 4590| 780| 79
ILG8VF20| 20| 120| 60| 1720| 1300| 6180| 500| 74
ILG8VF24| 24| 120| 60| 1720| 2000| 9182| 540| 77

Note: Requires 20A outlet, do not attempt to plug into standard 15A outlets.

PLEASE READ AND SAVE THESE INSTRUCTIONS. READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE, OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

BEFORE YOU BEGIN

WARNING: Installation, troubleshooting, and replacement of parts are to be performed only by authorized service technicians.

Electrical Requirements

The motor amperage and voltage ratings must be checked for compatibility to supply voltage before the final electrical connection. Please refer to the motor’s nameplate label.
Wiring must conform to local, state, and national codes.
DO NOT use this fan with any solid-state speed controller

SAFETY WARNING

Disconnect power immediately if any abnormalities occur during the operation
The unit is not waterproof. Operate unit after from water.
Do not insert any object into the blades during operation.

IMPORTANT INSTRUCTIONS

SAVE THESE INSTRUCTIONS

GENERAL SAFETY INSTRUCTION

Fans are UL/cUL Listed, Standard 705.

Do not depend on any switch as the sole means of disconnecting power when installing or servicing the fan.
Always disconnect, lock out, and tag out the power source before installing or servicing. Failure to disconnect the power source can result in fire, shock, or serious injury.
The motor will restart without warning after thermal protector trips. Do not touch the operating motor; it may be hot enough to cause injury.
Do not place body parts or objects in fan or motor openings while the motor is connected to the power source.
All electrical connections should be made by a qualified electrician.
These utility exhaust fans are for general-purpose exhaust applications only. Do not use these exhaust fans in an area where corrosive or explosive materials may be found.
Follow all local and state/provincial electrical and safety codes in the United States and Canada, as well as the National Electrical Code (NEC) and the Occupational Safety and Health Act (OSHA) in the United States, and the Canadian Electric Code
(CEC) in Canada.
Always disconnect the power source before working on or near a motor or its connected load.
Protect the power cable from coming in contact with sharp objects.
Do not kink or create tight bends in the power cable and never allow the cable to come in contact with oil, grease, hot surfaces, or chemicals.
Make certain that the power source conforms to the requirements of your specific exhaust fan model. The fan frame and motor must be electrically grounded to a suitable electrical ground, such as a grounded water pipe or ground wire system.
To reduce the risk of injury to persons, please observe the following: In the United States, OSHA-compliant guards are required when fan is installed within 7 feet of the floor or working level. In Canada, CSA-compliant guards are required when the fan is installed below 2.5 meters (8.2 feet) above the floor or grade level.
Questions? Please contact our service center by calling 1-800-317- 1688.

PRODUCT SPECIFICATIONS

Model| Impeller

Size (in)

| Volt

(V)

| Frequency

(Hz)

| Speed

(RPM)

| Power

(W)

| Air Flow

(CFM)

| Static

(Pa)

| Noise

dB(A)

---|---|---|---|---|---|---|---|---
ILG8VF10| 10| 120| 60| 3 450| 350| 1942| 350| 66
ILG8VF12| 12| 120| 60| 3450| 550| 2720| 450| 69
ILG8VF16| 16| 120| 60| 3450| 1200| 4590| 780| 79
ILG8VF20| 20| 120| 60| 1720| 1300| 6180| 500| 74
**ILG8VF24*| 24| 120| 60| 17 20| 2000* | 9182| 540| 77

Note : Requires 20A outlet, do not attempt to plug into standard 15A outlets

IN THE BOX CONTENT

High-velocity fan
User’s Manual

INSTALLATION AND OPERATION INSTRUCTION

All units are shipped fully assembled; no installation is required.

OPERATING INSTRUCTIONS

Make sure the unit is placed on a flat surface
Keep the area free of objects that could impede airflow on both the intake and exhaust sides of the fan.
For proper exhaust operation, a window, door, or louver should be opened for fresh air intake on the opposite side of the area to be ventilated.
Turn the On/Off switch to engage the fan

MAINTENANCE

Shut off power before cleaning or maintenance.
Wipe casing and impeller with care using a damped soft cloth or neutral detergent, and ensure the motor of other electrical components does not come in contact with water
Apply mechanical lubrication in machinery axletree after ventilators have been used for more than 1000 hours to ensure longer use life for ventilators.

WARNING: Do not depend on any switch as the sole means of disconnecting power when installing or servicing. If the power disconnect is not visible, utilize the Osha lock-out/tag-out procedure. Failure to do so may result in fatal electrical shock. Employ proper lock-out/tag-out procedures when performing maintenance.

WARRANTY

This heater comes with a 1-YEAR LIMITED COMPONENT WARRANTY. If your unit does not appear to be working properly, please contact our service center by calling 1-800-317-1688. Before your call, we encourage you to visit our service-related website www.ilivingusa.com for troubleshooting tips and service instructions if needed.

WARRANTY INFORMATION
Register your product at our website: Or visit iLivingUSA.com/register- product

FEEDBACK
LOVE IT? HELP US MAKE THE PRODUCT MORE FOR YOU.

Let us know with a customer review.
Please visit: https://www.amazon.com/review/review-your-purchases#

At iLiving USA, we are committed to bringing top-quality products to our customers.

FAQ

Can I plug the ILG8VF24 model into a standard 15A outlet?
No, the ILG8VF24 model requires a 20A outlet. Attempting to plug it into a standard 15A outlet can result in damage.
Who should perform installation, troubleshooting, and parts replacement?
Installation, troubleshooting, and replacement of parts should only be performed by authorized service technicians.
What should I do if my unit is not working properly?
If your unit is not working properly, please contact our service center at 1-800-317-1688 for assistance. You can also visit our service-related website www.ilivingusa.com for troubleshooting tips and service instructions.