INDESIT BAAN 134 PS Refrigerator Freezer Combination Instruction Manual

INDESIT BAAN 134 PS Refrigerator Freezer Combination

Product Information

Specifications:

• Model: BAAN 134 BAAN 134 S BAAN 134 X BAAN 134 PS BAAN 134 G
• Type: Refrigerator/Freezer Combination
• Language: English

Description of the Appliance:
The refrigerator/freezer combination is a versatile appliance that allows you to store and preserve your food items. It consists of a refrigerator compartment and a freezer compartment, both of which have their own temperature controls. The appliance is designed to provide efficient cooling and freezing functions, ensuring your food stays fresh for longer periods of time. The overall view of the appliance shows the main compartments, shelves, and drawers that are available for storage.

Accessories:
The appliance comes with various accessories to enhance its functionality:

• Shelves: Adjustable shelves for organizing food items.
• Drawers: Crisper drawers for storing fruits and vegetables.
• Door Bins: Compartments on the door for holding bottles, jars, and other small items.
• Chiller System: Special compartment for quick chilling of beverages and perishable items.

Product Usage Instructions

Installation:
Before placing the appliance into operation, please read the operating instructions carefully. They contain important information for safe use, installation, and care of the appliance.

Positioning and Connection:
Positioning:

1. Place the appliance in a well-ventilated, humidity-free room.
2. Ensure that the rear fan grills are not obstructed to allow proper airflow.

Levelling:

1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the front feet.

Electrical Connections:
After transporting the appliance, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket, ensure the following:

• The power supply cable and the electrical socket must be easily accessible once the appliance is installed.
• The cable must not be bent or compressed.
• The cable must be checked regularly and replaced by authorised technicians only.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Please ensure that the appliance is earthed and follow the instructions for replacing fuse covers or changing the plug if necessary.

Maintenance and Care:

Switching the Appliance Off:
To switch off the appliance, follow these steps:

1. Ensure that the appliance is not in use.
2. Unplug the power supply cable from the electrical socket.

Cleaning the Appliance:
To clean the appliance, follow these steps:

1. Switch off and unplug the appliance.
2. Wipe the interior and exterior surfaces with a soft cloth dampened with a mild detergent solution.
3. Rinse and dry the surfaces thoroughly.

Avoiding Mould and Unpleasant Odours:
To avoid mould and unpleasant odours, follow these tips:

• Regularly clean the interior of the appliance.
• Keep food items properly wrapped or covered to prevent odour transfer.
• Avoid storing spoiled or expired food items in the appliance.

Defrosting the Appliance:
To defrost the appliance, follow these steps:

1. Switch off and unplug the appliance.

2. Remove all food items from the freezer compartment and place
   them in a suitable alternative storage.

3. Leave the freezer door open to allow the ice to melt.

4. Clean the interior surfaces after defrosting.

Replacing the Light Bulb:
To replace the light bulb, follow these steps:

1. Switch off and unplug the appliance.
2. Locate the light bulb inside the appliance.
3. Remove the old bulb by unscrewing it.
4. Insert a new bulb of the same wattage and screw it in securely.
5. Switch on and plug in the appliance to test the new bulb.

Precautions and Tips:

General Safety:

• Read and follow all operating instructions carefully.
• Avoid touching moving parts or hot surfaces.
• Keep the appliance away from children and pets.

Disposal:
Dispose of the appliance by local regulations. Do not dispose of the appliance with regular household waste.

Respecting and Conserving the Environment:

• Use energy-saving settings and features whenever possible.
• Recycle packaging materials and dispose of them responsibly.

Troubleshooting:
If you encounter any issues with the appliance, refer to the troubleshooting section of the operating instructions for possible solutions.

Assistance:
If you require further assistance or technical support, contact authorised technicians for help.

FAQ:

• Q: Can I reverse the doors of the refrigerator?
  A: Yes, the doors of the refrigerator are reversible. Please refer to the installation instructions for detailed steps on how to reverse the doors.

• Q: How do I start the chiller system?
  A: To start the chiller system, locate the chiller compartment and adjust the temperature control to the desired setting. The chiller system will start cooling the compartment accordingly.

• Q: How can I use the refrigerator and freezer to their full potential?
  A: To use the refrigerator and freezer to their full potential, ensure that you properly organize food items, utilize adjustable shelves and drawers, and maintain appropriate temperature settings for each compartment.

Installation

! Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance.
! Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.
2. Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.
3. Leave a space of at least 10 cm between the top part of the appliance and any furniture above it, and at least 5 cm between the sides and any furniture/side walls.
4. Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).
5. In order to maintain the correct distance between the appliance and the wall behind it, fit the spacers supplied in the installation kit, following the instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the front feet.

Electrical connections
After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

• The appliance is earthed and the plug is compliant with the law.
• The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).
• The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).
• The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible. The cable must not be bent or compressed. The cable must be checked regularly and replaced by authorised technicians only (see Assistance). The manufacturer declines any liability should these safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING: THIS APPLIANCE MUST BE EARTHED.

• Replacing fuse covers:
  When replacing a faulty fuse, a 13amp ASTA-approved fuse to BS 1362 should always be used and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

• Replacement fuse covers:
  If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug
If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

• The plug is replaced by a fused 13amp re-wireable plug bearing the BSI mark of approval.
  or

• The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug
Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug. Remove the fuse.
WARNING: To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

Fitting a new plug
IMPORTANT: WIRES IN THE MAINS LEAD ARE COLOURED BY THE FOLLOWING CODE…

• Green and Yellow – Earth
• Blue – Neutral
• Brown – Live

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

• Connect Green and Yellow wire to terminal market ‘E’ or — or coloured Green and Yellow.
• Connect Brown wire to terminal marked ‘L’ or coloured red or brown.
• Connect Blue wire to terminal marked ‘N’ or coloured Black or Blue.

If a 13amp plug (BS 1363) is used it must be fitted with a 13amp fuse.
If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use.

CE Marking certifies that this appliance conforms to the following EEC directives:

• Low Voltage Equipment – 73/23/EEC & 93/68 EEC
• Electromagnetic Compatibility 89/336/EEC, 92/31/EEC & 93/68/EEC

Reversible doors

Description of the appliance

Overall view
The instructions contained in this manual apply to different model refrigerators. The diagrams may not directly represent the appliance purchased. For more complex features, consult the following pages.

Accessories

• SHELVES®: with or without grill. Due to the special guides, the shelves are removable and the height is adjustable (see diagram), allowing easy storage of large containers and food. Height can be adjusted without complete removal of the shelf.
• *MULTI-USE bin:** to store food (such as cold meats) for a long time and also prevent odours from lingering in the refrigerator.
• **FLEX COOL BOX*** This is the new box to keep meat, fish and cheese fresh. When positioned in the “lower” part of the fridge compartment, it is ideal for meat and fish; when moved to the “top” part of the fridge, it is perfect for cheese. It can be taken out of the fridge when it is not needed.
• *PLAY ZONE:** Thanks to the new “Play Zone” bottle rack, you can cool several bottles, cans and energy drinks quickly to have them constantly at hand.

If the “Play Zone” is placed on the glass shelf, you can store large and medium-sized bottles on it simply by laying the bottle on the flat rack. This is ideal for storing wine bottles. When folded and secured in place on either side of the shelf, the rack can be used to store cans (at the top), energy drinks (in the centre) and other cans and energy drinks can be rested horizontally on the remaining part of the shelf. When placing cans (onto the Play zone rack), make sure they do not touch the back of the refrigerator interior.
The “Play Zone” can be used just like a normal shelf (when placed flat) and moved up or down along the fridge walls together with the rest of the shelf. It can be washed easily, and is also dishwasher safe. The ideal position for the Play zone rack is the central shelf.

*GRAFFITI:** this is the marker kit that makes your Indesit refrigerator more colourful and fun. With these markers, you can write, leave messages and draw on the doors and sides of the refrigerator. GRAFFITI is extremely easy and convenient to use; after having written or drawn, you will be able to easily and quickly erase the drawings using a dry cloth or an ordinary whiteboard eraser. Do not use the pen holder to erase the ink. This could permanently damage the product and/or the parts included in the GRAFFITI kit.

WARNING:
the GRAFFITI marker kit was studied, designed and tested to be used exclusively on the doors and sides of those products belonging to the Indesit range with which it is sold.
Therefore, do not use:

• your Graffiti markers on other Indesit refrigerators and/ or other brands;
• your Graffiti markers on other appliances;
• other types or makes of markers on your Indesit refrigerator;

If you do not follow the instructions above, it could result in colour stains and/or permanent marks. Children should only use the markers under adult supervision. Indesit Company S.p.A shall not be liable for any effects resulting from incorrect use of the GRAFFITI kit.

Start-up and use

Starting the appliance

• Before starting the appliance, follow the installation instructions (see Installation).
• Before connecting the appliance, clean the compartments and accessories well with lukewarm water and bicarbonate.
  1. Insert the plug into the socket and ensure that the internal light illuminates.
  2. Turn the TEMPERATURE ADJUSTMENT knob to an average value. After a few hours you will be able to put food in the refrigerator.

Setting the temperature
The temperature inside the refrigerator compartment automatically adjusts itself according to the position of the thermostat knob.

The cooling section of the refrigerator is located inside the back wall of the refrigerator compartment for increased space and improved aesthetics. During operation, the back wall will be covered in frost or water droplets depending on whether the compressor is operating or paused. Do not worry, the refrigerator is functioning normally.

Chiller system
The appliance comes with one of the chiller systems described below: take note of your system to determine the most efficient food storage method.

Aircooler
It is recognizable due to the presence of the mechanism on the top part of the refrigerator compartment (see diagram). The Aircooler maintains a constant fridge temperature to keep food fresher for longer and will quickly restore the temperature to the correct level, even if the door is opened frequently: the blown air (A) is cooled when it comes into contact with the cold wall, whereas the hotter air (B) is sucked up (see diagram). The back wall may be covered in frost or droplets of water, depending on whether the compressor is in operation or whether it is paused.

Static
Models without the Aircooler have the cooling section in the internal back wall of the compartments. The wall will be covered in frost or water droplets depending on whether the compressor is operating or paused: both cases are normal. If the TEMPERATURE ADJUSTMENT knob has been set on high values with large quantities of food and with a high ambient temperature, the appliance can operate continuously, resulting in excessive frost formation and excessive energy consumption: compensate for this by shifting the knob towards lower values (defrosting will occur automatically).
In static appliances, the air circulates naturally: the colder air tends to move downwards as it is heavier. The food should be stored as follows:

Using the refrigerator to its full potential

• Use the TEMPERATURE ADJUSTMENT knob to adjust the temperature (see Description).
• Place only cold or lukewarm foods in the compartment, not hot foods (see Precautions and tips).
• Remember that cooked foods do not last longer than raw foods.
• Do not store liquids in open containers. They will increase humidity in the refrigerator and cause condensation to form.

Using the freezer to its full potential

• Do not re-freeze food that is defrosting or that has already been defrosted. These foods must be cooked and eaten (within 24 hours).
• Fresh food that needs to be frozen must not come into contact with food that has already been defrosted. Fresh food must be stored in the top FREEZER and STORAGE compartment where the temperature drops below – 18°C and guarantees rapid freezing.
• Do not place glass bottles which contain liquids, and which are corked or hermetically sealed in the freezer because they could break.
• The maximum quantity of food that may be frozen daily is indicated on the plate containing the technical properties located on the bottom left side of the refrigerator compartment (for example: Kg/24h: 4)

Do not open the door during freezing. If there is a power cut or malfunction, do not open the freezer door. This will help maintain the temperature inside the freezer, ensuring that foods are conserved for at least 9-14 hours. If the room temperature drops below 14°C for an extended period, the ideal temperature will not be reached in the freezer compartment and food preservation will be reduced.

1. Pull out the tray by pushing it up. Check that the tray is ompletely empty and fill it with water through the opening provided.
2. Take care not to exceed the level indicated (MAX WATER LEVEL). Excess water prevents the ice cubes from dispensing (if this happens, wait for the ice to melt and empty the tray).
3. Turn the tray 90°: due to the connected compartments each mould fills with water (see diagram).
4. Close the opening with the lid provided and put the tray back, placing the top part in the corresponding housing and allowing it to drop in again.
5. When the ice has formed (minimum time approximately 8 hours) knock the tray against a hard surface and wet the outside so that the ice cubes come loose and take them out through the opening.

Maintenance and care

Switching the appliance off
During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply. It is not sufficient to set the temperature adjustment knobs on • (appliance off) to eliminate all electrical contact.

Cleaning the appliance

• The external and internal parts, as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap. Do not use solvents, abrasive products, bleach or ammonia.
• The removable accessories may be soaked in warm water and soap or dishwashing liquid. Rinse and dry them carefully.
• The back of the appliance may collect dust which can be removed by delicately using the hose of a vacuum cleaner set on medium power. The appliance must be switched off and the plug must be pulled out before cleaning the appliance.

Avoiding mould and unpleasant odours

• The appliance is manufactured with hygienic materials which are odour free. To maintain an odour free refrigerator and to prevent the formation of stains, food must always be covered or sealed properly.
• If you want to switch the appliance off for an extended period, clean the inside and leave the doors open.

Defrosting the appliance

• Follow the instructions below.
  Do not speed up the defrosting process by using any devices or tools other than the scraper provided, you may damage the refrigeration circuit.

Defrosting the refrigerator compartment
The refrigerator has an automatic defrosting function: water is ducted to the back of the appliance by a special discharge outlet (see diagram) where the heat produced by the compressor causes it to evaporate. It is necessary to clean the discharge hole regularly so that the water can flow out easily.

Defrosting the freezer compartment
Remove frost regularly using the special scraper provided. If the frost layer is greater than 5 mm, it is necessary to defrost manually:

1. Set the TEMPERATURE ADJUSTMENT knob to the position • .
2. Wrap frozen foods in newspaper and place them in another freezer or a cool place.
3. Leave the door open until the frost has melted completely. This can be made easier by placing containers with lukewarm water in the freezer compartment.
4. Clean and dry the freezer compartment carefully before switchina the anoliance on again.
5. Certain appliances are fitted with the DRAIN SYSTEM to lead the water outside: insert the scraper into the slot provided at the bottom and let the water flow into a container (see diagram).
6. Wait for approximately 2 hours, i.e. until the ideal storage conditions have been restored, before placing food in the freezer compartment.

Replacing the light bulb
To replace the light bulb in the refrigerator compartment, pull out the plug from the electrical socket. Follow the instructions below. Access the light bulb by removing the cover as indicated in the diagram. Replace it with a similar light bulb within the power range indicated on the cover (15W or 25W).

Precautions and tips

The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully.

This appliance complies with the following Community Directives:

• 73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments;
• 89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and subsequent amendments;
• 2002/96/CE..

General safety

• The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use.
• The appliance must be used to store and freeze food products by adults only and according to the instructions in this manual.
• The appliance must not be installed outdoors, even in covered areas. It is extremely dangerous to leave the appliance exposed to rain and storms.
• Do not touch the appliance with bare feet or with wet or moist hands and feet.
• WARNING: do not damage the refrigerant circuit.
• Do not touch the internal cooling elements: this could cause skin abrasions or frost/freezer burns.
• When unplugging the appliance always pull the plug from the mains socket, do not pull on the cable.
• Before cleaning and maintenance, always switch off the appliance and disconnect it from the electrical supply. It is not sufficient to set the temperature adjustment knobs on • (appliance off) to eliminate all electrical contact.
• In the case of a malfunction, under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or further malfunctioning of the appliance.
• WARNING: do not use electrical or mechanical devices or tools other than the special scraper provided inside the compartments.
• Do not put ice cubes taken directly from the freezer into your mouth.
• Do not allow children to tamper with the controls or play with the appliance. Under no circumstance should they be allowed to sit on the bins or to hang from the door.
• Keep packaging material out of the reach of children! It can become a choking or suffocation hazard.

Disposal

• Observe local environmental standards when disposing packaging material for recycling purposes.
• The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.

Respecting and conserving the environment

• Install the appliance in a fresh and well-ventilated room. Ensure that it is protected from direct sunlight and do not place it near heat sources.
• Try to avoid keeping the door open for long periods or opening the door too frequently to conserve energy.
• Do not fill the appliance with too much food: cold air must circulate freely for food to be preserved properly. If circulation is impeded, the compressor will work continuously.
• Do not place hot food directly into the refrigerator. The internal temperature will increase and force the compressor to work harder and will consume more energy.
• Defrost the appliance if ice forms (see Maintenance). A thick layer of ice makes cold transference to food products more difficult and results in increased energy consumption.
• Regularly check the door seals and wipe them clean to ensure they are free of debris and to prevent cold air from escaping (see Maintenance).

Troubleshooting

If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list.

Assistance

Before calling for Assistance:

• Check if the malfunction can be solved on your own (see Troubleshooting).
• If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service Centre.

Communicating:

• type of malfunction
• appliance model (Mod.)
• serial number (S/N)

This information can be found on the data plate located on the bottom left side of the refrigerator compartment.

Never call on unauthorized technicians and always refuse spare parts which are not originals.

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>