iTronics IT-01 Ultrasonic Aroma Diffuser User Manual

iTronics IT-01 Ultrasonic Aroma Diffuser

Operating Instructions

General Notes

Important instructions

These operating instructions contain important information for proper and safe operation of the product.
Therefore, read the operating instructions through in full before you use the product. Otherwise there is a risk of hazards to personnel and damage to the product.
Keep the operating instructions safe. If you pass on the product to third parties, you must also hand over the operating instructions with it.

Intended use

The product is used for producing aroma in to the air in closed indoor rooms only.
The product is not intended for commercial use but rather only domestic use.
Intended use also includes compliance with all information and specifications contained in these operating instructions. Any use other than for its intended purpose shall be deemed as misuse.

Misuse

• Misuse of the product can lead to hazardous situations.
• Only ever fill the product with water. Do not use any other liquids.
• Do not use the product in wet rooms, such as bathrooms or sau-nas.
• Do not use the product in rooms with open fire (fireplace, gas cooker, candles etc.).
• Do not insert any objects into the openings of the product.
• Do not place the product directly in front of an air conditioning unit or other electrical devices.
• The device must be used only with the adapter supplied with the appliance.

Children

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Make sure that the product is set up out of the reach of children.
• Make sure that children are not allowed to play with the product at any time.
• Cleaning and user maintenance shall not be made by children without supervision.
• Do not leave packaging material lying around unattended. There is a risk of asphyxiation.

Improper handling

• Improper handling of the product can cause injuries.
• Make sure that the product is connected properly. In the process, adhere to these operating instructions.
• Make sure that the product is used properly. Never cover it.
• Be aware that unauthorised conversion and/or modification of the product is prohibited. In case of unauthorised conversion and/or modification the warranty cover will be rendered null and void.
• Never open the water tank during operation.
• Only empty the water tank on the drain side. It is marked “Drain Side” on the product.
• Before filling or emptying the product, always pull the mains plug from the socket.
• Before installation, cleaning or a period in which the product is not used, pull the mains from the socket.
• Empty the water tank before a period in which the product is not used.
• Contact the manufacturer or a specialist if you have any doubts regarding the way the product works, its safety or how to connect the product.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Setup

• If liquids, damp air or fire come into contact with the product, there is a risk of injuries.
• Do not set up the product in rooms with high air humidity, such as bathrooms or saunas.
• Make sure that no liquids enter into the inside of the housing. This will not only destroy the product but there is also a risk of fire.
• Protect the product from the effects of the elements. Do not set it up outdoors.
• Only ever place the product on flat surfaces. If placed on an inclined surface, water from the water tank may enter into the housing.
• Make sure that the air inlet openings on the base of the product are knot covered or sealed.

Aroma Diffuser Features

The aroma diffuser is a modern fragrance diffuser which uses ultrasound technology to generate a fine mist and thus distribute the fragrance throughout the whole room. The aroma diffuser has the following functions:

Mist

Press “ ” button.

• Press once: turns green indicator on, which is intermittent mist (mist every 30 seconds and pauses for 30 seconds).
• Press again: turns to blue indicator, and changes to continuous mist model.
• Press third time: power off.

Timer

1. First, choose your mist type between continuous mist (blue) or intermittent mist (green) mode. Then press the Timer button repeatedly to set the desired runtime.
2. The timer options are:
   • Press once: 1-hour count down timer is set and corresponding LED(1H) will light up.
   • Press again: 2-hour count down timer is set and corresponding LED will light up.
   • Press third time: 3-hour count down timer is set and corresponding LED will light up.
   • Press fourth time: 4-hour count down timer is set and corresponding LED will light up.
   • Press fifth time: turns count down timer off.
     You can also turn on the timer by pressing the timer button first. By doing this, the mist will only disperse in continuous mode. If you wish to set intermittent mist mode, you must do so by pressing the mist button first and selecting intermittent mist mode.
     Note: Light and Timer function can be used at the same time.

LED Light

• Press the LIGHT button once to automatically cycle through the different colors.
• Press again to stay on the current color.
• Press the LIGHT button repeatedly to select the desired color.
• Press and hold the LIGHT button for 3 seconds to turn off the light.
  Note: Light and mist function can be used at the same time.

Other Function

Anti-dry system: When there is no water or a little amount of water in the water tank, the power supply will automatically and immediately turn off even with power connected except for the light function, and the device will beep 6 times as a warning.

Operation

1. Remove top cover (dia. 1).

2. Fill with distilled water to the maximum mark (120 ml) (dia. 2)

3. Add 2-3 drops fragrance oil (dia. 3).

4. Replace top cover while ensuring perfect fit (dia. 5).
   NOTE: The top cover of the device consists of an inner cover and outer cover. The inner and outer cover have been assembled together at our manufacturing facility but it’s possible, the inner cover has detached from the outer cover. If so, please insert the inner cover back into the outer cover firmly (dia. 4 )before you place the top half of the device back on the diffuser base. Otherwise, the diffuser will not operate as intended.

5. Connect power supply unit (dia.6).

6. Place on a level surface (dia.7).

7. Switch on: Press “ ” button (dia.8).

Maintenance

• After using 5-6 times, or 2 3- days, please clean the product as follows.
• Unplug the unit from mains power supply and remove cover.
• Pour out any remaining water from the “DRAIN SIDE” of the tank
• Unplug power cord from the base of the unit.
• Put 1 tablespoon of citric acid in the water tank, add just under 120 ml of warm water.
• Leave for 5 minutes, and then drain solution from the “DRAIN SIDE” of the tank.
• Wipe with a soft cloth. Avoid Ultrasonic Vibration plate area, Which can be gently cleaned with a cotton bud.

Accidental Leakage

In the event of the unit being knocked over or tipped during use, please follow the steps below to avoid malfunction.

• Unplug the unit and remove cover.
• Pour any remaining water out of the water tank.
• Shake the unit gently to drain any water inside the mechanism, and then allow drying for at least 24 hours.

Troubleshooting

Experiencing issues with your device? Please check below troubleshooting tips before contacting us if you wonder whether damage occurred.

• Is there any water in the water tank?
• Is there enough water in the water tank?
• Is the power cord connected properly?

|

• Add water to tank.

• When there is no water or a little amount of water in the water tank, the power
  supply will automatically and immediately turn off after pressing the MIST button.

• Disconnect the adapter, check cables and re-connect carefully.

No mist or abnormal mist|

• Not enough water?
• Too much water?
• Dirt on the ultrasonic plate? Cover and inner cover are not installed properly?
• Dirt on the air suction port at the base?

|

• Add water to tank.
• When the water reaches above the max, the mist will be abnormal.
• Clean the water tank. (Please refer to the Maintenance Section)
• Fix the cover and inner cover because the mist cannot reach to the FOG NOZZLE without right installation.
• If there is dirt on the air suction port, the airflow will be restricted and then mist cannot be blown out.

Water leakage from product|

• Cover and inner cover are not installed properly?
• Has the inner cover shifted?
• Low temperature or high humidity?

|

• Fix the cover and inner cover.
• The produced mist cannot reach to FOG NOZZLE and will cause water droplets if the cover and inner cover shifted.
• Under these conditions, the mist may condense quickly into water droplets.

Disposal

 Electrical and electronic components must not be disposed of with the domestic waste. Once the product reaches the end of its service life, dispose of it and its components separately in accordance with the local valid regulations for disposal.

Specifications

Limited one-year warranty

iTronics warrants this product to be free of defects in parts, materials and workmanship for a period of one year, from date of purchase.
Should any repairs or servicing under this warranty be required, contact Customer Service by phone or email for instructions on how to pack and ship the product to iTronics.

Customer service

Telephone: 1-877-515-7797(USA & Canada only)
Email: [email protected]
Hours: Weekdays 8:00 AM- 6:00 PM EST
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state.

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>