integral DTR-60.6 AV Receiver Instruction Manual

DTR-60.6
Advanced Manual

Before start

What’s in the box

1. Main unit
2.  Remote controller (RC-913R) ×1, Batteries (AAA/R03) ×2
3. Indoor FM antenna ×1
4.  AM loop antenna ×1
5. Speaker setup microphone ×1
6. Power cord ×1

Glossary
Dolby Atmos
This unit supports playback in the Dolby Atmos format which provides 360e sound placement. Unlike existing surround systems, Dolby Atmos doesn’t rely on channels, but rather enables the accurate placement of sound objects that have independent motion in  a three-dimensional space with even greater clarity. Dolby Atmos is an optional audio format on Blu-ray Discs and achieves a three- dimensional sound field by introducing a sound field above the listener.
ARC
The ARC (Audio Return Channel) feature transfers TV audio signals via HDMI cable so that you can play the audio from the TV through this unit. Connection to an ARC compatible TV is complete with one HDMI cable. Refer to the instruction manual for your  TV to see if it supports ARC. (P11)
HDMI CEC functionality
Control features such as linking input switching with the input selector and players conforming to the CEC standard, switching audio output and volume using the remote controller of a CEC-compliant TV, and automatically switching this unit to standby when  the TV is turned off (P13)
HDMI Standby Through
Video and audio signals from AV components can be transmitted to the TV even if this unit is in standby (P13)
CAUTION: Connect speakers with 4Ω to 16Ω impedance. The power cord must be connected only after all other cable connections are completed. We will not accept responsibility for damage arising from the connection of equipment manufactured by other companies.

Hookup

Step1: Speaker Layout

1. Front Speakers
2. Center Speaker
3. Surround Speakers
4. Powered Subwoofer
5. Surround Back Speakers

7.1-Channel System

Front speakers output front stereo sound and a center speaker outputs center sound such as dialogs and vocals.
Surround speakers create back sound field. Powered subwoofer reproduces bass sounds and creates rich sound field.
Surround back speakers improve the sense of envelopment created by the back sound field and provide a more realistic sound field. Furthermore, by installing surround back speakers, you can select the Dolby Atmos listening mode, which realizes the most up- to-date 3D sound, when the input format is Dolby Atmos.
The front speakers should be positioned at ear height, while the surround speakers should be positioned just above ear height. Center speaker should be set up facing the listening position.
Placing the powered subwoofer between the center speaker and a front speaker gives you a natural sound even when playing music.
The optimal positioning is for surround back speakers to be at ear height.
0If you are including surround back speakers in the setup, surround speakers are required.

9, 10 Height Speakers
Front High Speakers
Rear High Speakers

Height Speakers; Front High Speakers/Rear High Speakers
These are types of height speakers. Furthermore, by installing height speakers, you can select the Dolby Atmos listening mode, which realizes the most up-to-date 3D sound including overhead sounds, when the input format is Dolby Atmos.
Front high speakers or rear high speakers should be situated at least 0.9m higher than the front speakers.
Front high speakers should be situated directly above the front speakers and the distance between the rear high speakers should match the distance between the front speakers. Both should be set up facing the listening position. Note that with height speakers  you can install up to two sets; Height 1 Speaker and Height 2 Speaker.

9, 10 :Height Speakers
Top Front Speakers
Top Middle Speakers
Top Rear Speakers

Height Speakers; Ceiling Speakers
These are types of height speakers. Furthermore, by installing height speakers, you can select the Dolby Atmos listening mode, which realizes the most up-to-date 3D sound including overhead sounds, when the input format is Dolby Atmos.
Fit top front speakers on the ceiling forward of the seating position, top middle speakers on the ceiling directly above the seating position, and top rear speakers on the ceiling behind the seating position. The distance between each pair should match the distance  between the two front speakers. Note that with height speakers you can install up to two sets; Height 1 Speaker and Height 2 Speaker.
Dolby Laboratories recommends placing this type of height speakers to obtain the best Dolby Atmos effect.

9, 10 Height Speakers
Dolby Enabled Speakers (Front)
Dolby Enabled Speakers (Surround)
Dolby Enabled Speakers (Surround Back)

Height Speakers; Dolby Enabled Speakers (Dolby Speakers)
These are types of height speakers. Dolby enabled speakers are special speakers designed to face the ceiling so that sound is heard after bouncing off the ceiling so that sound appears to be coming from overhead.
Furthermore, by installing height speakers, you can select the Dolby Atmos listening mode, which realizes the most up-to-date 3D sound including overhead sounds, when the input format is Dolby Atmos.
Place them either above the front speakers or above the surround speakers or surround back speakers. Note that with height speakers you can install up to two sets; Height
1 Speaker and Height 2 Speaker.

1. 2 Front Speakers (Bi-Amping)

Bi-Amping the Speakers
It is possible to connect front speakers supporting Bi-Amping to improve quality of the bass and treble. The effects and placements for speakers are the same as for a system that doesn’t use Bi-Amping speakers.

Speaker combinations
In any of the combinations, up to two powered subwoofers can be connected.

Points to note with speaker combinations
＊1:It is not possible to use Bi-AMP and ZONE speakers at the same time. However, with 2.1 ch to 7.1 ch, it is possible to use Bi-AMP and ZONE 2 speakers at the same time.
＊2:If you have not connected ZONE 3 speakers in another room but have only connected ZONE 2 speakers, connect the ZONE 2 speakers to the HEIGHT 1 jacks. However, if Bi-Amping connections are used for front speakers, connect the ZONE 2 speakers to  the HEIGHT 2 jacks.
＊3:If front speakers are to be Bi-Amping connected, height speakers need to be connected to the HEIGHT 2 jacks.
＊4:ZONE 2 speakers need to be connected to the HEIGHT 1 jack, ZONE 3 speakers need to be connected to the SURROUND BACK jacks, and height speakers need to be connected to the HEIGHT 2 jacks.
＊5:This unit consists of a 9 ch amplifier, so when using a Bi-Amping connection for the front speakers, use an RCA cable to connect the power amplifier to the PRE OUT HEIGHT 2 jacks, then connect the height speakers to the power amplifier.
＊6:This unit consists of a 9 ch amplifier, so with this combination use an RCA cable to connect the power amplifier to the PRE OUT BACK jacks, then connect the surround back speakers to the power amplifier.

HEIGHT 1/HEIGHT 2
When connecting 2 sets of height speakers, the height speaker combinations you can choose are as follows.
–Height 1 Speaker: T op Middle, Height 2 Speaker: Rear High
–Height 1 Speaker: Front High, Height 2 Speaker: One of Rear High/T op Middle/T op Rear/Dolby Enabled Speaker (Surround)/Dolby Enabled Speaker (Surround Back)
–Height 1 Speaker: T op Front or Dolby Enabled Speaker (Front), Height 2 Speaker: One of Rear High/T op Rear/Dolby Enabled Speaker (Surround)/Dolby Enabled Speaker (Surround Back)
When connecting only one set of height speakers, select one type of height speakers from the types available.

Step2: Connect the Speakers

Standard Connections
Refer to the illustration to connect the speaker system.
＊Depending on the combination of speakers, you may need to connect to other jacks. See “Points to note with speaker combinations” (P8) for details.

Make sure the exposed wires of the speakers do not stick out of the speaker terminals when connecting. If the exposed wires of the speakers touch the rear panel or the + and – wires touch each other, the protection circuit will be activated. 

Connections with BiAmping speakers
Connect front speakers compatible with Bi-Amping connection to the FRONT jacks and the HEIGHT 1 jacks.
Make sure you remove the jumper bar fitted between the woofer jacks and tweeter jacks of the front speakers. In case of Bi-Amping connection, refer to the instruction manual of your speakers.

Make sure the exposed wires of the speakers do not stick out of the speaker terminals when connecting. If the exposed wires of the speakers touch the rear panel or the + and – wires touch each other, the protection circuit will be activated.

Step3: Connect the TV

TV-1 (ARC TV)
This describes the connections for a TV that supports the ARC (Audio Return Channel) feature. By connecting with a single HDMI cable, you can not only output the video input to this unit to the TV, but you can also play the sound from the TV through this unit. Choose an HDMI IN jack on the TV that supports ARC when connecting.
Setup
Settings are required to use the ARC function.
Select “Yes” in “5. Audio Return Channel” (P22) in the Initial Setup.
Please refer to the TV’s operation manual for directions on connections and setup for the TV.

Another TV or projector can be connected to the HDMI OUT SUB jack. This jack does not support ARC. For details about how to output video from the HDMI OUT SUB jack (P23)

TV-2 (Non-ARC TV)
This describes the connections for a TV that does not support the ARC (Audio Return Channel) feature. By connecting with both an HDMI cable and a digital optical cable, you can not only output the video input to this unit to the TV, but you can also play the  sound from the TV through this unit.
If the TV doesn’t have a DIGITAL OPTICAL OUT jack, use an analog audio cable and connect the TV’s ANALOG AUDIO OUT jack to the AUDIO IN TV jack on this unit.
Connection with a digital optical cable is not necessary if you will watch TV through a device such as a cable set-top box (that is, not use a tuner built into the TV) that you have connected to the INPUT jack on this unit.

Another TV or projector can be connected to the HDMI OUT SUB jack. This jack does not support ARC. For details about how to output video from the HDMI OUT SUB jack (P23)

Step4: Connect the AV Components

HDMI AV Components
This is an example of connection with an AV component that has an HDMI jack. With connection to an AV component that conforms with the CEC (Consumer Electronics Control) standard, you can use features such as the HDMI CEC feature that links with the  input selector, and the HDMI Standby Through feature which allows you to play video and audio from AV components on the TV even when this unit is in standby mode. 0T o play 4K or 1080p video, use a high speed HDMI cable. Further, to enjoy HDCP2.2  compatible video, connect to the HDMI IN1 to IN5 jacks.
Setup

• HDMI setup (P22) is required to use the HDMI CEC and HDMI Standby Through features. Make settings after all connections are complete.
• To enjoy digital surround sound including Dolby Digital, audio output should be set to “Bitstream output” on the connected Blu-ray Disc player or other device.
  You can connect a device such as a video camera to the AUX Input HDMI jack on the front panel.

Non-HDMI AV Components
This is an example of connection with an AV component that does not have an HDMI jack. Make the connections to the AV component to match the jacks it has. When video input connection is to the BD/DVD jack, the audio input connection should also be to  the BD/DVD jacks, and so on, so that you connect the video input jacks to the jacks with the same name as the audio input jacks. Note that video signals input to the VIDEO IN jack or the COMPONENT VIDEO IN jacks will be converted to HDMI video signals  and then output from the HDMI OUT jack.

• To enjoy digital surround playback in formats such as  Dolby Digital, you need to make a connection for audio signals with a digital coaxial cable or digital optical cable.
• It is possible to change assignment of the input jacks you see in the illustration at left, so you can also connect to any jack other than BD/DVD. For details, see the Advanced Manual.

Setup

• The COMPONENT VIDEO IN jacks are compatible only with 480i or 576i resolution. When you input video signals to the COMPONENT VIDEO IN jacks, set the output resolution of the player to 480i or 576i. Select interlace if there is no option for 480i,  etc. If your player does not support 480i or 576i output, use the VIDEO IN jack.
• To enjoy digital surround sound including Dolby igital, audio output should be set to “Bitstream output” on the connected Blu-ray Disc Player or other device.

Audio Components
Example of a connection with an Audio Component.
Connect a CD player using a digital optical cable or analog audio cable. You can also connect a turntable that has an MM-type cartridge to the PHONO jack.

• If the turntable has a built-in audio equalizer, connect it to an AUDIO IN jack other than the PHONO jack.
  Further, if the turntable uses an MC type cartridge, install an audio equalizer compatible with the MC type cartridge between the unit and the turntable, then connect to any AUDIO IN jack other than the PHONO jack.
  If the turntable has a ground wire, connect it to the GND terminal of this unit.

Component Video Monitor
Use a component video cable to connect a TV or projector that has component video input jacks rather than an HDMI input jack. To output video from the COMPONENT VIDEO OUT jacks, you must connect the external AV components using a component  video cable.

Step5: Multi-zone Connection

ZONE 2 TV
You can enjoy content from a Blu-ray Disc player on a TV equipped with an HDMI input jack in the separate room (ZONE 2) by playing a Blu-ray Disc player in the main room (where this unit is located), or play the content from another AV component. Only the video from devices connected to the HDMI IN1 to IN5 jacks can be played on the TV in the separate room.
Setup

• Settings are required in Initial Setup, “4. Multi Zone Setup” (P22) to enjoy this feature.
• The audio from externally connected AV components can only be played in ZONE 2 when the audio is analog or 2ch PCM audio. It may also be necessary to convert the audio output of the AV component to PCM output.

ZONE 2 PRE/LINE OUT/ZONE 2 SPEAKER
You can enjoy audio in the separate room by, for example, playing a Blu-ray Disc player in the main room (where this unit is located) and listening to internet radio in the separate room (ZONE 2).
Connections with an AV component
Connect with HDMI IN 1 to 5 if you want to output an external AV component to ZONE 2. If the AV component doesn’t have an HDMI jack, connect using a digital optical cable, digital coaxial cable, or analog audio cable.
ZONE 2 PRE/LINE OUT
It is possible to play 2 ch sources in a separate room while sources with a maximum of 11.1 ch are being played in the main room. Connect the ZONE 2 PRE/LINE OUT jacks of the unit and the LINE IN jacks of the pre-main amplifier or the power amplifier in a  separate room with an analog audio cable.
ZONE 2 SPEAKER
It is possible to connect speakers in a separate room and play 2 ch sources.

• You can play through a maximum of 7.1 channels in the main room during ZONE 2 playback. With Bi-Amping connection or while ZONE 3 speaker connection settings are enabled, no sound is heard from the surround back speakers or height speakers and  a maximum of 5.1 channel playback is possible in the main room. Listening modes such as Dolby Atmos cannot be selected.

Setup

• Settings are required in Initial Setup, “4. Multi Zone Setup” (P22) to enjoy this feature.
• The audio from externally connected AV components can only be played in ZONE 2 when the audio is analog or 2ch PCM audio. If you have connected to this unit with an HDMI cable or digital optical/coaxial cable, may be necessary to convert the audio  output of the AV component to PCM output.

ZONE 3 PRE/LINE OUT/ZONE 3 SPEAKER
Along with the main room and ZONE 2, you can also enjoy audio in yet another room (ZONE 3).
Connections with an AV component
To output the audio of an external AV component to ZONE 3, connect using an analog audio cable. Output to ZONE 3 is not possible when you connect with an HDMI cable or igital optical/coaxial cable.
ZONE 3 PRE/LINE OUT
It is possible to play 2 ch sources in a separate room while sources with a maximum of 11.1 ch are being played in the main room. Connect the ZONE 3 PRE/LINE OUT jacks of the unit and the LINE IN jacks of the pre-main amplifier or the power amplifier in a  separate room with an analog audio cable.
ZONE 3 SPEAKER
It is possible to connect speakers in a separate room and play 2 ch sources.

• During ZONE 3 playback, no sound is heard from the surround back speakers or the height speakers and a maximum of 5.1 channel playback is possible in the main room. Listening modes such as the Dolby Atmos modes cannot be selected.

Setup

• Settings are required in Initial Setup, “4. Multi Zone Setup” (P22) to enjoy this feature.

Step6: Connect Other Cables

Antenna Hookup
Move the antenna around while playing the radio to find the position with the best reception. Use a thumb tack or similar to attach the indoor FM antenna to a wall.
Network Hookup
Connect this unit to the network using wired LAN. You can enjoy network features such as internet radio, Music Server, and AirPlay by connecting the unit to the network.
If you connect by wired LAN, connect with an Ethernet cable to the ETHERNET port as shown in the illustration.
Power Cord Hookup
This unit includes removable power cords. Connect the power cord to the power outlet after completing all other connections. Connect the power cord to AC INLET of the unit and then connect to the outlet. Always disconnect the outlet side first when  disconnecting the power cord.

Setup

Step 7: Power On & Initial Setup

Initial Setup starts automatically
Switch the input on the TV to that assigned to the unit.
When you turn the unit on for the first time, Initial Setup is automatically shown on the TV to enable you to make settings required for startup using simple operations following onscreen guidance.

• If you terminate the procedure on the way or want to change a setting made during Initial Setup, press on the remote controller, select “8. Miscellaneous” – “Initial Setup”, and press Enter.

1. AccuEQ Room Calibration
   Place the supplied speaker setup microphone in the listening position, measure the test tones emitted by the speakers, then the unit automatically sets the optimum volume level for each speaker, the crossover frequencies, and the distance from the  listening position. This also enables correction of distortion caused by the acoustic environment of the room.

When putting the speaker setup microphone on a tripod, refer to the illustration when putting it in place.
Set the subwoofer volume to more than halfway.
Calibration takes between 3 and 12 minutes to be completed. The speakers emit the test tone at high volume during measurement, so be careful of your surroundings. Keep the room as quiet as possible during measurement.
When using THX certified speakers, THX recommends setting the crossover frequency to “80Hz(THX)”. It is also recommended to manually adjust the settings for each speaker to suit the specific characteristics of each room.
If the power of this unit suddenly turns off, the wires in the speaker cables may have touch the rear panel or other wires and tripped the protection circuit. Twist the wires again properly and make sure they do not stick out of the speaker terminals when  connecting.

2. Source Connection
   Check that each input source is connected correctly. Follow the guidance, select the input you want to confirm, start play of the selected player, and confirm that the images appear on the TV and that sound is played.

3. Network Connection
   You can check the network connection status.
   0A confirmation screen asking you to agree to the privacy policy is displayed during network setting. Select “Yes” and press Enter to indicate agreement.

4. Multi Zone Setup
   Make these settings to enjoy video and audio in a room other than the main room (ZONE 2/ZONE 3).
   Select “Using AV Receiver” when connecting speakers in the separate room. Select “with External Premain Amplifier” when connecting a pre-main amplifier in the separate room. Select “with External Power Amplifier” when connecting a power amplifier.
   If you are going to be connecting a TV in the separate room (ZONE 2), then when “Would you be using TV in 2nd room?” is displayed, select “Yes”.

5. Audio Return Channel
   If you have connected a TV that supports ARC, select “Yes”. This unit’s ARC setting turns on and you can listen to the TV’s audio through this unit.
   If you select “Yes”, the HDMI CEC function is enabled and power consumption increases during standby.

HDMI Setup
HDMI CEC
Make this setting to enable the control feature for devices complying with the CEC standard. This is set to on automatically if you have selected “Yes” in “5. Audio Return Channel” in the Initial Setup.
Press the button on the remote controller to set “6.
Hardware” – “HDMI” – “HDMI CEC” to “On” on the TV screen. Also enable the CEC control feature on the CEC device you have connected.

HDMI Standby Through
Even if this unit is in standby, the input signals from AV components are transmitted to the TV.

• Auto” / “Auto (Eco)”: Select one of these settings when connected AV components comply with the CEC standard. Irrespective of the input selector selected immediately before switching the unit to standby, you can transmit the input signals from AV  components to the TV.
  Select “Auto (Eco)” if the TV is also CEC-compliant. You can reduce power consumption in standby mode.

• Input selector names for “BD/DVD”, etc.: You can transmit the input signals from the set input selector to the TV. It can be selected when “HDMI CEC” is set to “Off”.

• “Last”: You can transfer the input signals of the input selector selected immediately prior to the unit being switched to standby. It can be selected when “HDMI CEC” is set to “Off”.
  To exit the settings, press.

Play back

AV Component Playback

1. Switch the input on the TV to that assigned to the unit.

2. Press the input selector (a) on the remote controller with the same name as the jack to which you connected the player to switch the input.
   For example, press BD/DVD to play the player connected to the BD/DVD jack. Press TV to listen the TV’s sound.
   When the CEC link function works, the input switches automatically when you have connected a CEC compliant TV and player to this unit using HDMI connection.

3. Start play on the player.

4. Use VOL+/– (b) to adjust the volume.
   When a TV is connected to the HDMI OUT SUB jack
   Press Q on the remote controller to display the Quick Menu, and set “Other” – “HDMI Out” to either “SUB” or “MAIN+SUB”.

Listening Mode
This unit is equipped with a variety of listening modes, and you can select the optimum listening mode for movies, TV, music, and games by repeatedly pressing the Movie/TV, Music, and Game buttons (c). For details on the listening modes, see the Advanced  Manual. This section introduces some of the popular modes.
Dolby Digital/DTS modes
When the input signal is a digital surround format such as Dolby Digital or DTS, you can select the listening mode that suits the input signal. Dolby Digital is displayed for Dolby Digital and DTS-HD Master Audio is displayed for DTS-HD Master Audio. The  output is Stereo for 2-channel input signals.
Direct
This listening mode can be selected for all input signals. It shuts down processing that affects sound quality to deliver a playback sound quality closer to sources. Speakers play the sound field according to the number of channels in the input signal, so there  would be output from only the front speakers for a 2ch signal, for example.
Dolby Surround/DTS Neural:X
These listening modes allow you to expand the playback signal to a maximum of 11 channel to suit the connected speaker configuration when the input signal is 2 channels or 5.1channels.
THX surround modes
Multiple surround speakers are installed in movie theaters so that the moviegoer is enveloped in a natural surround sound. Even with just two surround speakers, the THX Cinema mode achieves, with the high-quality technology developed by THX, the same  kind of breadth of sound you would get in a movie theater along with the natural flow of timbre with the sound field towards the front. Also available are modes such as THX Music and THX Games.
Original surround modes
You can select listening modes such as the All Ch Stereo mode where a stereo image is played from both the front and the rear, and Orchestra (only with the Music button) which is best for playback of classical and opera pieces. The listening mode last selected  for the source is remembered for each of the Movie/TV, Music, Game buttons. If content you play is not supported by the listening mode you selected last, the listening mode that is standard for that content is selected automatically.
Press (d) repeatedly to switch the display of the main unit in order of:

Part Names

Front Panel

1. On/Standby button: Turns the unit on or into standby mode.

2. Hybrid Standby indicator: Lights if the unit enters standby mode when the features are enabled that continue to work when this unit is in standby, such as HDMI Standby Through and Network Standby.

3. HDMI Out button: Allows you to select the HDMI OUT jack to output video signals from “MAIN”, “SUB”, and “MAIN+SUB”.

4. Remote control sensor

5. Tone, j, i buttons: Adjusts the high tone and low tone.
   Press the T one button repeatedly to select the item to adjust from “Bass” and “Treble”, and press the j or i button to adjust. 6.Display ( P30)

6. Listening Mode buttons: Select the listening mode. (P23)

7. Dimmer button: You can adjust the brightness of the display in three steps. It cannot be turned off completely.

8. Memory button: Used to register AM/FM radio stations.

9. Tuning Mode button: Switches the tuning mode.

10. Info button: Switches the information on the display.

11. Setup button: Displays the Setup menu.

12. Cursor buttons (Tuning43 / Preset21 button) and Enter button: Select the item with the cursors and press Enter to confirm your selection. When using the Tuner, select the frequency with Tuning43 , or select preset stations with Preset21 .

13. Return button: Returns the display to the previous state.

14. Master Volume: Allows you to adjust the volume.

15. Zone 2/Zone 3 buttons: Controls the multi-zone function. (P26) Off button: Switches the multi-zone function off.

16. Whole House Mode button: Enables the WHOLE HOUSE MODE function to play the same source in all the multi-zone connected rooms. (P26)
    Off button: Switches the WHOLE HOUSE MODE function off.

17. Phones jack: Stereo headphones with a standard plug (1/4 inch or ø6.3mm) are connected.

18. Setup Mic jack: The supplied speaker setup microphone is connected.

19. Input selector button: Switch the input to be played.

20. AUX Input HDMI jack: Connect to a video camera, etc., using a HDMI cable.

Rear Panel

1. COMPONENT VIDEO IN/OUT jacks: Transfer the video signals of an AV component with a component video cable.
2. ZONE 2/ZONE 3 PRE/LINE OUT jacks: Output audio signals with an analog audio cable to a pre-main amplifier or a power amplifier in a separate room (ZONE 2/ZONE 3). (P18,19)
3. HDMI IN jacks: Transmit video signals and audio signals with a HDMI cable connected to an AV component.
4. VIDEO IN jacks: Input the video signals from AV components with an analog video cable.
5. AUDIO IN jacks: Input TV or AV component audio signals with an analog audio cable.
6. GND terminal: The ground wire of the turntable is connected.
7. HDMI OUT jacks: Transmit video signals and audio signals with a HDMI cable connected to a monitor such as a TV or projector.
8. ETHERNET port: Connect to the network with an Ethernet cable.
9. USB port: A USB storage device is connected so that music files stored in it can be played. You can also supply power (maximum 5V/1A) to USB devices with a USB cable.
10. DIGITAL IN OPTICAL/COAXIAL jacks: Input the digital audio signals from TV or AV components with a digital optical cable or digital coaxial cable.
11. HDBaseT™ IN/OUT jack: HDMI input signals are output via the Ethernet cable. As they are covered with a seal when shipped, remove it when you use the ports. Do not use the ports to connect the ETHERNET port of network device.
12. AC INLET: The supplied power cord is connected.
13. RS232 port: For connection to the home control system.
14. IR IN/OUT port: Allows you to connect a multiroom remote control kit.
15. 12V TRIGGER OUT A/B/C jacks: Allows you to connect a device with 12V trigger input jack to enable link operation between the device and the unit.
16. TUNER AM/FM 75Ω terminal: The supplied antennas are connected.
17. SPEAKERS terminals: Connect speakers with speaker cables. (North American models are compatible with banana plugs.)
18. SUBWOOFER PRE OUT jacks: Connect a powered subwoofer with a subwoofer cable. Up to two powered subwoofers can be connected. You can set the volume levels of the 2 powered subwoofers to different levels.
19. PRE OUT jacks: Connect a power amplifier.

Remote Controller

1. button: Turns the unit on or into standby mode.

2. Input selector buttons: Switches the input to be played.

3. Q (Quick Menu) button: You can perform common settings on the TV screen. ( P27)

4. Cursor buttons and Enter button: Select the item with the cursors and press Enter to confirm your selection.

5. button: Displays the Setup menu.

6. Volume buttons: Allows you to adjust the volume. This button also cancels the muting.

7.  button: Temporarily mutes audio. Press again to cancel muting.

8. Listening Mode buttons: Allows you to select the listening mode. (P23)  Main/Zone 2/Zone 3 buttons: Controls the multi-zone function.(P26)

9. Play buttons: You can start play of the Music Server or USB.

10. button: Used for repeat or random play operations when playing Music Server or USB.
    Clear button: Deletes all characters you have entered when entering text on the TV screen.

11. Dimmer button: You can adjust the brightness of the display in three steps. It cannot be turned off completely.

12. button: Switches the information on the display.

13. button: Returns the display to the previous state.

14. Mode button: Switches tuning to an AM/FM station between automatic tuning and manual tuning.

15. Memory button: Used to register AM/FM radio stations.
    

Display

1. Speaker/Channel display: Displays the output channel that corresponds to the selected listening mode.

2. Lights in the following conditions.
   When headphones are connected.
   Z2/Z3: When ZONE 2/ZONE 3 is on.
   NET: When “NET” is selected with the input selector and the unit is connected to the network. It will flash if the connection to the network is not correct.
   USB: When “NET” is selected with the input selector and the unit is connected by USB and the USB device is selected. Flashes if the USB is not properly connected.
   HDMI: When HDMI signals are input and the HDMI input is selected.
   DIGITAL: When digital signals are input and the digital input is selected.

3. Lights according to the type of input digital audio signals and the listening mode.

4. Lights in the following conditions.
   RDS (Australian models): Receiving RDS broadcasting.
   TUNED: Receiving AM/FM radio.
   FM ST: Receiving FM stereo.
   SLEEP: When the sleep timer is set.
   AUTO STBY: When Auto Standby function is enabled.

5. Flashes when muting is on.

6. Displays various information of the input signals. Characters that cannot be displayed on this unit are replaced with asterisks (＊).
   When playing back software which has been encoded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD and Dolby Atmos, sometimes you may see a brief message which will read “DialogNorm: X dB” (X being a numeric value). For example, if you see the  following message: “DialogNorm:+4dB”, to keep the overall output level at THX calibrated loudness, just turn down the volume control by 4dB.

7. Lights when operating the “NET” input selector indicating remote controller cursor operations are possible in screens showing list of tracks, for example.

License and Trademark Information

Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos,Dolby Surround, and the double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS in combination with the Symbol, DTS:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the United States and/or other  countries. © DTS, Inc. All Rights Reserved.

THX and the THX logo are trademarks of THX Ltd., registered in the U.S. and other countries. U.S. Pat. nos. 7,254,239 & 7,593,533 & 7,974,425 & 8,452,028 & 8,509,457 Taiwan Pat. I238671 European Pat. 1,360,874 THX Select2 Plus
Before any home theater component can be THX Select2 Plus certified, it must pass a rigorous series of quality and performance tests. Only then can a product feature the THX Select2 Plus logo, which is your guarantee that the Home Theater products you  purchase will give you superb performance for many years to come. THX Select2 Plus requirements define hundreds of parameters, including power amplifier performance, and integrated amplifier performance and operation for both digital and analog  domains. THX Select2 Plus receivers also feature proprietary THX technologies (e.g., THX Mode) which accurately translate movie soundtracks for home theater playback. Re-Equalization and the “Re-EQ” logo are trademarks of THX Ltd.

“VLSC” and “VLSC (logo)” are trademarks of Onkyo Corporation.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

AirPlay, iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
iPad Air and iPad mini are trademarks of Apple Inc.
“Made for iPod”, “Made for iPhone” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not  responsible for the operation of this device or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, iPhone or iPad may affect wireless performance.
AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion or later, and PC with iTunes 10.2.2 or later.
Apple, Apple TV and Safari are trademarks of Apple Inc., registered in the U.S. and other countries.

HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.

PANDORA, the PANDORA logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission.

This Mark Certifies that this product is compliant with the BLACKFIRE ALLIANCE Standard.
Please refer to WWW.BLACKFIREALLIANCE.COM for more information.
BLACKFIRE™ is a Registered Trademark (No. 85,900,599) of BLACKFIRE RESEARCH CORP . All rights reserved.

FireConnect™ is technology powered by BlackFire Research.

The product with this logo is conformed to Hi-Res Audio standard defined by Japan Audio Society. This logo is used under license from Japan Audio Society.
This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft.
Windows and the Windows logo are trademarks of the Microsoft group of companies.
QR Code is a registered trademark of DENSO WAVE INCORPORATED.
“x.v.Color” and “x.v.Color” logo are trademarks of Sony Corporation.
DSD and the Direct Stream Digital logo are trademarks of Sony Corporation.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
AccuEQ, Music Optimizer, RIHD and WRAT are trademarks of Onkyo Corporation.
“All other trademarks are the property of their respective owners.”

DISCLAIMER
Through this device you are able to link to other services or websites which are not under the control of any company which has designed, manufactured or distributed/have distributed this device, and its affiliates (collectively, “Company”). We have no control  over the nature, content and availability of those services. The inclusion of any links does not necessarily imply a recommendation or endorse the views expressed within them.
All information, content and services available through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws of applicable countries.
The information, content and services provided through this device are for your personal, noncommercial use only. Any information, content or services may not be used in any manner other than previously approved by the appropriate content owner or service provider.
You may not modify, copy, republish, translate, exploit, create derivative works, upload, post, transmit, sell or distribute in any manner any information, content or services available through this device, unless expressly permitted by the appropriate copyright,  patent, trademark and/or other intellectual property owner, including, without limitation, content owner or service provider.
THE CONTENT AND SERVICES AVAILABLE THROUGH THIS DEVICE ARE PROVIDED “AS IS”.
COMPANY DOES NOT WARRANT INFORMATION, CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY , FOR ANY PURPOSE.
COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Company makes no representation or warranty of any kind, express or implied, about the completeness, accuracy, validity, legality, reliability, suitability or availability with respect to the information, content or services available through this device. Company  shall not be liable, whether in contract or tort, including negligence and strict liability, for any direct, indirect, special, incidental or consequential damages or any other damages arising out of, or in connection with, any information contained in, or as a result of the use of any content or service by you or any third party, even if Company has been advised of the possibility of such damages, nor shall Company be liable for any third party claims against users of this device or any third party.
In no event shall Company be responsible nor liable for, without limiting the generality of the foregoing, any interruption or suspension of any information, content or service available through this device. Company is neither responsible nor liable for customer  service related to the information, content and services available through this device. Any question or request for service relating to the information, content or services should be made directly to the appropriate content owners and services providers.

2-3-12 Yaesu, Chuo-ku, Tokyo 104-0028 JAPAN
http://www.integraworldwide.com