BRESSER 91-06000 8×32 Fernrohr Spotting Scope Instruction Manual

June 4, 2024
BRESSER

BRESSER 91-06000 8×32 Fernrohr Spotting Scope

BRESSER 91-06000 8x32 Fernrohr Spotting Scope product

General Warnings

  • Risk of blindness
    Never use this device to look directly at the sun or in the direct proximity of the sun. Doing so may result in a risk of blindness.

  • Choking hazard
    Children should only use the device under adult supervision. Keep packaging ma-terial, like plastic bags and rubber bands, out of the reach of children, as these materials pose a choking hazard.

  • Risk of fire
    Do not place the device, particularly the lenses, in direct sunlight. The concentration of light could cause a fi re.

  • Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the Service Centre and can send the device in to be repaired, if necessary.

  • Do not expose the device to high temperatures.

  • The device is intended only for private use. Please heed the privacy of other people. Do not use this device to look into apartments, for example.

Parts overview

  1. Scope (lower part)
  2. Objective lens
  3. Scope (upper part)
  4. EyepieceBRESSER 91-06000 8x32 Fernrohr Spotting Scope 01

Operation

You can use your spotting scope as soon as you take it out of the package. Hold the scope with one hand on the lower part (1). Then, holding the eyepiece (4) in front of your eye, look at a far-away object (e.g. a church tower).
If you do not see the object in focus immediately, you can slowly extend or retract the upper part of the scope (3). You will see that the focus changes. Depending on how far away an object is, you will have to adjust the focus in this way from time to time.

Notes on cleaning

  • Clean the eyepieces and/or lenses only with a soft, lint-free cloth, (e.g. a microfibre cloth). To avoid scratching the lenses, use only gentle pressure with the cleaning cloth.
  • To remove more stubborn dirt, moisten the cleaning cloth with an eyeglass-cleaning solution and wipe the lenses gently.
  • Protect the device from dust and moisture. After use, particularly in high humidity, let the device acclimatize for a short period of time, so that the residual moisture can dissipate before storing.

DISPOSAL

Dispose of the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste-disposal service or environmental authority for information on the proper disposal.

Warranty and warranty term extension

The warranty term is two years from the date of purchase. Please keep your proof of purchase. Register at www.bresser.de/warranty and fill out a brief questionnaire to get your warranty term extended to five years. Registration must be completed within three months of purchase (date of receipt) to validate the warranty. If you register thereafter, the warranty term will not be extended.
If you have problems with your device, please contact our customer service first. Do not send any products without consulting us fi rst by telephone. Many problems with your device can be solved over the phone. If the problem cannot be resolved by phone, we will take care of transporting your device to be repaired. If the problem occurred after the warranty ended or it is not covered by our warranty terms, you will receive an estimate of repair costs, free of charge.
Service Hotline: +49 (0) 2872 – 80 74-210

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

BRESSER User Manuals

Related Manuals