lenovo B40-30 All in One PC User Guide

lenovo B40-30 All in One PC

Product Information

Specifications

• Model Name: Lenovo B40-30, Lenovo B40-70, Lenovo B40-45, Lenovo B50-30, Lenovo B50-30 Touch, Lenovo B50-70, Lenovo B50-45, Lenovo N40-30, Lenovo N40-70, Lenovo N50-70, Lenovo N40-45, Lenovo N50-45, Lenovo B40-80, Lenovo B50-80, Lenovo N40-80, Lenovo N50-80
• MT: 20390, 80F1 20392, 80F3 20394, 80F5 20382, 80ES 20383, 80ET 20384, 80EU 20388, 80F0 20460, 80H4 20462, 80H6 20439, 80HA 20461, 80H5 20441, 80HC 20395, 80F6, 80LS 20386, 80EW, 80LT 20463, 80H7 20440, 80HB

FAQ

• Q: Where can I find the safety notices and important tips for using my Lenovo notebook computer?
  • A: You can find the safety notices and important tips in the included manuals that come with your computer.
• Q: How do I enable or disable the numeric keypad on my B50/N50 Series Lenovo notebook computer?
  • A: To enable or disable the numeric keypad, press the Numeric Lock key (Num Lock) on your keyboard.

Read the safety notices and important tips in the included manuals before using your computer.

Notes

• Before using the product, be sure to read Lenovo Safety and General Information Guide first.
• Some instructions in this guide may assume that you are using Windows® 7 or Windows® 8.1. If you are using other Windows operating systems, some operations may be slightly different. If you are using other operating systems, some operations may not apply to you.
• The features described in this guide are common to most models. Some features might not be available on your computer and/or your computer might include features that are not described in this user guide.
• The illustrations used in this manual are for the Lenovo B50-70 unless otherwise stated.
• The illustrations in this manual may differ from the actual product. Please refer to the actual product.

Regulatory Notice

• For details, refer to Guides & Manuals at http://support.lenovo.com.

Instructions and technical information in this manual are applicable to the following Lenovo notebook computers unless otherwise stated.

Models

Getting to know your computer

Top view

B40-30/N40-30/B40-70/N40-70/B40-45/N40-45/B40-80/N40-80

B50-30/B50-30 Touch/B50-70/N50-70/B50-45/N50-45/B50-80/ N50-80

Note

• The dashed areas indicate parts that are invisible from the outside.
• The illustrations may differ from the actual product. Please refer to the actual product.

Attention

• Do not open the display panel beyond 130 degrees.
• When closing the display panel, be careful not to leave pens or any other objects in between the display panel and the keyboard. Otherwise, the display panel can be damaged.

1. Integrated camera (on select models)
   • Used for video communication or taking photos.
2. Built-in microphone (on select models)
   • Used for video conferencing, voice narration, or audio recording.
3. Wireless antennas (on select models)
   • Connects to a wireless adapter to receive and send wireless radio signals.
4. Display
   • Provides visual output.
5. Speakers
   • Provides audio output.
6. Power button
   • Press this button to turn on the computer.
7. Fingerprint reader (on select models)
   • Registers fingerprints that can be used as passwords to secure your computer.
8. Touchpad
   • Performs the same respective functions as a conventional mouse.
   • Slide your fingertip on the touch pad in the direction you wish to move the cursor.
9. Touchpad buttons
   • Performs the functions of the left and right buttons as those of the left and right buttons on a conventional mouse.

Using the keyboard

Your computer has a numeric keypad, hotkeys, and function keys incorporated in its standard keyboard.

Numeric keypad (Applicable for B50/N50 Series)

• The keyboard has a separate numeric keypad.
• To enable or disable the keypad, press the Numeric Lock key (Num Lock).

Note: The numeric lock indicator is on when the numeric keypad is enabled.

Hotkeys

You can access certain system settings quickly by pressing the appropriate hotkeys.

Note

• If you change the HotKey Mode from Enabled to Disabled in the BIOS setup utility, you need to press the Fn key in combination with the appropriate hotkey.

Function key combinations

• To use the function key combinations, press the Fn key 1, then press one of the function keys 2.

B40-30/N40-30/B40-70/N40-70/B40-45/N40-45/B40-80/N40-80:

B50-30/B50-30 Touch/B50-70/N50-70/B50-45/N50-45/B50-80/N50-80

The following is a brief introduction to the function key combinations.

Left-side view

B40-30/N40-30/B40-70/N40-70/B40-45/N40-45/B50-30/B50-30 Touch/B50-45/N50-45/B40-80/N40-80

B50-70/N50-70/B50-80/N50-80

1. AC power adapter jack
   • Connects the AC power adapter.
2. Lenovo OneLink connector (on select models)
   • When the AC power adapter is connected to the AC power adapter jack, it provides power to the computer and charges the battery. When a supported ThinkPad OneLink Dock is connected to the Lenovo OneLink connector, it can not only extend the computer capabilities, but also provide AC power to the computer and charge the battery.
   • To use the Lenovo OneLink connector, you need to remove the connector cover from the Lenovo OneLink connector first.
   • Note: Ensure that you keep the connector cover. Reattach it to the Lenovo OneLink connector when you are not using the Lenovo OneLink connector.
3. Ventilation slots
   • Dissipates internal heat.
   • Attention: Make sure that none of the ventilation slots are blocked or else overheating of the computer may occur.
4. VGA port
   • Connects to external display devices.
5. RJ-45 port
   • Connects the computer to an Ethernet network.
   • Danger: To avoid the risk of electrical shock, do not connect a telephone cable to the Ethernet port. You can only connect an Ethernet cable to this port.
6. HDMI port
   • Connects to devices with HDMI input such as a TV or a display.
7. USB 3.0 ports or USB 2.0 ports
   • Connect to USB devices. For details, see “Connecting USB devices”.

Note

• The USB 3.0 connector is compatible with USB 1.1, 2.0, and 3.0.

Connecting USB devices

You can connect a USB device to your computer by inserting its USB plug (Type A) into the USB port on your computer.

The first time you plug a USB device into a USB port on your computer, Windows automatically installs a driver for that device. After the driver is installed, you can disconnect and reconnect the device without performing any additional steps.

Note: Typically, Windows detects a newly connected device after connecting it and then installs the driver automatically. However, some devices might require you to install the driver before connecting. Check the documentation provided by the manufacturer of the device before connecting.

Before disconnecting a USB storage device, make sure your computer has finished using the device to transfer the data. Click the Safely Remove Hardware and Eject Media icon in the notification area of the Windows desktop screen to remove the device before disconnecting.

Note

• If your USB device uses a power cord, connect the device to a power source before connecting it. Otherwise, the device may not be recognized.
• When the computer is in sleep mode, you can only use the keyboard instead of the mouse to wake up the computer.

Connecting to a wired network

Wired connections are a reliable and safe way to connect the computer to the Internet.

Cable| Cable Internet services use a cable modem connected to the residential cable TV line.
---|---
DSL| DSL is a family of related technologies that bring high speed network access to homes and small businesses over ordinary telephone lines.

Hardware connections

• • Not supplied.

Note

• The above diagrams are for reference only. Actual connections method may vary.

Software configuration

• Consult your Internet Service Provider (ISP) for details about how to configure your computer.

Right-side view

B40-30/N40-30/B40-70/N40-70/B40-45/N40-45/B40-80/N40-80:

B50-30/B50-30 Touch/B50-70/N50-70/B50-45/N50-45/B50-80/ N50-80:

1. Combo audio jack: Connects to a headset.

   • Note: The combo audio jack does not support conventional microphones.
   • The recording function might not be supported if third-party headphones or headsets are connected due to different industry standards.

2. USB port: Connects to USB devices. For details, see “Connecting USB devices”.

3. Novo button: When the computer is off, press this button to start the Lenovo OneKey Recovery system, or to startup normally, or the BIOS setup utility, or to enter the boot menu.

4. Kensington lock slot

   • Attach a security lock (not supplied) here to help protect your computer from theft and unauthorized use.
   • You can attach a security lock to your computer to help prevent it from being removed without your permission. For details on installing the security lock, please refer to the instructions shipped with the security lock that you have purchased.

5. Note: Before purchasing any security product, verify that it is compatible with this type of security keyhole.

   • You are responsible for evaluating, selecting, and implementing the locking devices and security features. Lenovo offers no comment, judgment, or warranty regarding the function, quality, or performance of locking devices and security features.

6. Optical drive (on select models)

   • Reads/Burns optical discs.

Front view

1. System status indicators
   • For details, see “System status indicators”.
2. Memory card slot
   • Accepts memory cards (not supplied). For details, see “Using memory cards (not supplied)”.

System status indicators

• The system status indicators show the current status of your computer.

Power and battery status indicator

• Green: The battery has a charge between 20% and 100% and the AC adapter is not connected to the computer, or the battery has a charge between 80% and 100% and the AC power adapter is connected to the computer.
• Blinking green: The battery has a charge between 20% and 80% and the AC power adapter is connected to the computer or the computer is in sleep mode.
• Amber: The battery has a charge between 5% and 20% and the AC adapter is not connected to the computer.
• Blinking amber: The battery has a charge of 20% or less and the AC power adapter is connected to the computer.
• Off: The battery is detached, or the battery has a charge of 5% or less and the AC adapter is not connected to the computer, or the computer is powered off or in hibernate mode.

Hard disk drive indicator

When this indicator is on, the hard disk drive is reading or writing data.

Attention

• When the indicator is on, do not put the computer into sleep mode or turn off the computer.
• When the indicator is on, do not move the computer. Sudden physical shock might cause hard disk drive errors.

Using memory cards (not supplied)

Your computer supports the following types of memory card:

• Secure Digital (SD) card
• Secure Digital High Capacity (SDHC) card
• SD eXtended Capacity (SDXC) card
• MultiMediaCard (MMC)

Attention

• Insert only one card in the slot at a time.
• This card reader does not support SDIO devices (Such as SDIO Bluetooth, and so on).

Inserting a memory card

• Slide a memory card in until it clicks into place.

Note

• If a dummy card is shipped with the computer, push the dummy card and remove it before inserting a memory card.

Removing a memory card

1. Push the memory card in until you hear a click.
2. Gently pull the memory card out of the memory card slot.

Attention

• Before removing a memory card, disable it through Safely Remove Hardware and Eject Media to avoid data corruption.

Bottom view

1. Battery latch-manual
   • Keeps the battery pack secured in place.
2. Battery pack
   • Provide the power for the computer.
3. Battery latch-spring loaded
   • Keeps the battery pack secured in place.
4. Bottom slot cover
   • The hard disk drive, memory module, and mini-PCI Express Card are placed underneath.

Learning the basics

Configuring the operating system for the first time

You need to configure the operating system when it is first used. The configuration process may include the procedures below:

• Accepting the end user license agreement
• Configuring the Internet connection
• Registering the operating system
• Creating a user account

Putting the computer to sleep or shutting it down

• When you have finished working with your computer, you can put it to sleep or shut it down.

Putting your computer to sleep

If you will be away from your computer for only a short time, put the computer to sleep. When the computer is in sleep mode, you can quickly wake it up to resume use, bypassing the startup process.
To put the computer to sleep, do one of the following:

• Close the display lid.
• Press the power button.
• Preform the following based on the operating system.
  • For the Windows 7 operating system:
  • Click Start →Sleep.
  • For the Windows 8.1 operating system:
  • Open the charms bar, then select → Settings Power →Sleep.

Attention

• Wait until the power and battery status indicator light starts blinking green (indicating that the computer is in sleep mode) before you move your computer.
• Moving your computer while the hard disk drive is spinning can damage the hard disk, causing loss of data.

To wake up the computer, do one of the following:

• Press the power button.
• Press the Fn key on the keyboard.

Shutting down the computer

If you are not going to use your computer for a long time, shut it down.
To shut down your computer:

• For the Windows 7 operating system:
  • Click Start →Shut down.
• For the Windows 8.1 operating system:
  • Open the charms bar and select Settings → Power → Shut down.
• Right-click the Start button in the lower-left corner and select Shut down or sign out → Shut down.
• On the Start screen, click and select Shut down.

Note: This operation depends on your BIOS settings. Please refer to the actual product.

Connecting to a wireless network

Enabling the wireless connection

To connect to a wireless network, do the following:

1. Ensure the airplane mode is turned off. If the airplane mode is turned on, press the hotkey F7 ( ) to turn this mode off.
2. View the available wireless networks.
   • For the Windows 7 operating system:
   • Click the wireless network connection status icon in the Windows notification area. A list of available wireless networks will be displayed.
   • For the Windows 8.1 operating system:
   • Open the charms bar and select Settings → . A list of available wireless networks will be displayed.
3. Click a network name in the list, and then click Connect.

Note

• Some networks require a network security key or passphrase to connect.
• To connect to one of those networks, ask the network administrator or the Internet service provider (ISP) for the security key or passphrase.

Software configuration

• Consult your Internet Service Provider (ISP) and search the Windows Help and Support Center for details on how to configure your computer.

Help and support

If you have questions about using the Windows operating system, refer to Windows Help and Support. To access Windows Help and Support:

• For the Windows 7 operating system:
  • Click Start → Help and Support.
• For the Windows 8.1 operating system:
  • Open the charms bar and select Settings, and then select Help on the Settings menu.
  • Press the Windows key + Fn + F1 or Fn + F1.

You can read the Windows Help and Support file on your computer. You can also get online help and support by clicking on one of the two links listed under More to explore.

Note: Windows 8.1 also provides an app, Help + Tips. You can find it on the Start screen, to learn more information on new features of Windows 8.1.

Operating system interfaces (for the Windows 8.1 operating system)

Windows 8.1 comes with two main user interfaces: the Start screen and the Windows desktop.
To switch from the Start screen to the Windows desktop, do one of the following:

• Select the Desktop tile on the Start screen.
• Press the Windows key + D.

To switch from the desktop to the Start screen, do one of the following:

• Select Start from the charms bar.
• Press the Windows key .
• Move the cursor to the lower-left corner, and then select the Start screen button.

Start screen

Desktop

Charms and the charms bar (for the Windows 8.1 operating system)

Charms are navigation buttons that let you access basic tasks quickly. Charms include: Search, Share, Start, Devices, and Settings. The charms bar is the menu that contains the charms. To display the charms bar, do one of the following:

• Move the cursor to the upper-right or lower-right corner until the charms bar is displayed.
• Press the Windows key + C.

Search charm

• The Search charm is a powerful new way to find what you are looking for, including settings, files, Web images, Web videos, etc.

Share charm

• The Share charm lets you send links, photos, and more to your friends and social networks without leaving the app you are in.

Start charm

• The Start charm is a fast way to go to the Start screen.

Devices charm

• The Devices charm allows you to connect or send files to connected external devices, including the devices to play, print, and project.

Settings charm

• The Settings charm lets you perform basic tasks, such as setting the volume or shutting down the computer.
• Also, you can get to the Control Panel through the Settings charm when on the Desktop screen.

Lenovo OneKey Recovery system

The Lenovo OneKey Recovery system is software designed to back up and restore your computer. You can use it to restore the system partition to its original status in case of a system failure. You can also create user backups for easy restoration as required.

Note

• The OneKey Recovery system is not installed on some models. Please refer to the actual product.
• If your computer is preinstalled with a GNU/Linux operating system, Onekey Recovery system is not available.
• To utilize the features of the OneKey Recovery system, your hard disk already includes a hidden partition by default to store the system image file and the OneKey Recovery system program files. This default partition is hidden for security reasons, which explains why the available disk space is less than the stated capacity.

Backing up the system partition

You can back up the system partition to an image file. To back up the system partition, do the following:

1. Click OneKey Recovery on the home screen to start the Lenovo One Key Recovery system.
2. Click System Backup.
3. Select a back-up location and click Next to start the backup.

Note

• You can choose a back-up location on the local hard disk drive or an external storage device.
• The back-up process may take a while.
• The back-up process is only available when Windows can be started normally.

Restoring

You can choose to restore the system partition to its original status or to a previously created back-up point. To restore the system partition, do the following:

1. Press the Novo button or click OneKey Recovery on the home screen to start the Lenovo OneKey Recovery system.
2. Click System Recovery. The computer restarts to the recovery environment.
3. Follow the on-screen instructions to restore the system partition to its original status or to a previously created back-up point.

Note

• The recovery process is irreversible. Make sure to back up any data you wish to save on the system partition before starting the recovery process.
• The recovery process may take a while. Make sure to connect the AC power adapter to your computer during the recovery process.
• The above instructions should be followed when Windows can be started normally.
• When the computer is in hibernation status, you can not start the Lenovo OneKey Recovery system by pressing the Novo button for Windows 7 system.

If Windows cannot be started, follow the steps below to start the Lenovo OneKey Recovery system:

1. Shut down the computer.
2. Press the Novo button. From the Novo Button Menu, select System recovery and press Enter.

Troubleshooting

Frequently asked questions

• This section lists frequently asked questions by category.

Finding information

• What safety precautions should I follow when using my computer?
  • The Lenovo Safety and General Information Guide which came with your computer contains safety precautions for using your computer. Read and follow all the precautions when using your computer.
• Where can I find the hardware specifications for my computer?
  • You can find hardware specification for your computer from the printed flyers which came with your computer.
• Where can I find warranty information?
  • For the warranty applicable to your computer, including the warranty period and type of warranty service, see the Lenovo limited warranty flyer that came with your computer.

Drivers and preinstalled software

• Where are the installation discs for Lenovo preinstalled software (desktop software)?
  • Your computer did not come with installation discs for Lenovo preinstalled software. If you need to reinstall preinstalled software, you can find the installation program on the D partition of your hard disk. If you cannot find the installation program there, download it from the Lenovo consumer support Web site.
• Where can I find drivers for the various hardware devices of my computer?
  • If your computer is preinstalled with a Windows operating system, Lenovo provides drivers for the hardware devices that you need on the D partition of your hard disk. You can also download the latest device drivers from the Lenovo consumer support Web site.

Lenovo OneKey Recovery system

• Where are the recovery discs?

  • Your computer did not come with recovery discs. Use the recovery system if you need to restore the system to its factory status.

• What can I do if the back-up process fails?
  If you can start the backup but it fails during the back-up process, try the following steps:

  1. Close all open programs, and then restart the back-up process.
  2. Check to see if the destination media is damaged. Select another path and then try again.

• When do I need to restore the system to its factory status?

  • Use this feature when the operating system fails to start up. If there is critical data on the system partition, back it up before starting recovery.

BIOS setup utility

• What is the BIOS setup utility?

  • The BIOS setup utility is ROM-based software. It communicates basic computer information and provides options for setting boot devices, security, hardware mode, and other preferences.

• How can I start the BIOS setup utility?
  To start the BIOS setup utility:

  1. Shut down the computer.
  2. Press the Novo button and then select BIOS Setup.

• How can I change the boot priority?

  • There are two boot priorities: UEFI First and Legacy First. To change the boot priority, start the BIOS setup utility and set Boot Priority to UEFI First or Legacy First in the Boot menu.

• When do I need to change the boot priority?

  • The default boot priorities are UEFI First. If you need to install a legacy operating system (that is, an earlier version than that of your current operating system) on your computer, you will need to change the boot priority to Legacy First. The legacy operating system cannot be installed if you do not change the boot priority.

Getting help

• How can I contact the customer support center?
  • See “Chapter 3. Getting help and service” of Lenovo Safety and General Information Guide.

Troubleshooting

Appendix A

Appendix A. CRU instructions

Customer Replaceable Units (CRUs) are parts that can be upgraded or replaced by the customer. If a CRU is determined to be defective during the warranty period, a replacement CRU will be provided to the customer. Customers are responsible for installing the self-service CRUs for this product. Customers also can install optional-service CRUs, which might require some technical skills or tools, or request that a technician install the optional-service CRU under the terms of the applicable warranty service type for your country or region.

Notes

• The illustrations used in this chapter are of the Lenovo B50-70, unless otherwise stated.
• The illustrations in this manual might differ from the actual product. Please refer to the actual product.

Replacing the battery pack

Note

• Use only the battery provided by Lenovo. Any other batteries could ignite or explode.
• Make sure the computer is turned off and all the cables disconnected from the computer before you replace the battery pack.
• Make sure the computer display is closed to avoid being damaged.

To replace the battery pack, do the following:

1. Unlock the manual battery latch 1. While holding the spring-loaded battery latch in the unlocked position 2, remove the battery pack in the direction shown by the arrow 3.
2. Install a fully charged battery pack.
3. Slide the manual battery latch to the locked position.

Replacing the hard disk drive

You can increase the storage capacity of your computer by replacing the hard disk drive with one of greater capacity. You can purchase a new hard disk drive from your reseller or Lenovo marketing representative.

Notes

• Replace the hard disk drive only for upgrading or repair. The connectors and bay of the hard disk drive were not designed for frequent changes or drive swapping.
• The preinstalled software are not included on an optional hard disk drive.
• Make sure the computer is turned off and all the cables disconnected from the computer before you replace the hard disk drive.
• Make sure the computer display is closed to avoid being damaged.

Handling a hard disk drive

• Do not drop the drive or subject it to physical shock. Put the drive on a material, such as soft cloth, that absorbs any physical shock.
• Do not apply pressure to the cover of the drive.
• Do not touch the connector of the drive.

The hard disk drive is very sensitive. Incorrect handling can cause damage and permanent loss of data on the hard disk. Before removing the hard disk drive, make a backup copy of all the information on the hard disk, and then turn the computer off. Never remove the hard disk drive while the system is operating or in sleep mode.

To replace the hard disk drive, do the following:

1. Remove the battery pack. For details, see “Replacing the battery pack”.
2. Remove the screws 1, and then remove the bottom slot cover 2.
3. Remove the frame fixing screws 3.
4. Remove the hard disk drive by gently pulling it in the direction of the arrow 4.
5. Remove the screws and detach the metal frame from the hard disk drive.
6. Attach the metal frame to a new hard disk drive and tighten the screws.
7. Slide the new hard disk drive firmly into place, and then reinstall the frame fixing screws to secure the drive.
8. Reinstall the bottom slot cover and tighten the screws.
9. Reinstall the battery pack. For details, see “Replacing the battery pack”.

Replacing the memory

You can increase the amount of memory in your computer by installing double data rate three synchronous dynamic random access memory (DDR3 SDRAM)-available as an option-in the memory slot of your computer. DDR3 SDRAM modules are available in various capacities.

Note

• Use only the memory types supported by your computer. If you incorrectly install optional memory, or install an unsupported memory type, a warning beep will sound when you try to start the computer.
• Make sure the computer is turned off and all the cables disconnected from the computer before you replace the memory.
• Make sure the computer display is closed to avoid being damaged.
• Two memory channels are supported. Both channels should have a memory of the same size and rank. You should install the ram in Slot 1 if there is only ONE ram module. (B40-30/N40-30/B50-30)

To install a DDR3 SDRAM module, do the following:

1. Touch a metal table or a grounded metal object to reduce any static electricity in your body, which could damage the DDR3 SDRAM. Do not touch the contact edge of the DDR3 SDRAM module.
2. Remove the battery pack. For details, see “Replacing the battery pack”.
3. Remove the screws 1, and then remove the bottom slot cover 2.
4. If two DDR3 SDRAM modules are already installed in the memory slot, remove one of them to make room for the new one by pulling out on the latches on both edges of the socket at the same time. Be sure to save the old DDR3 SDRAM for future use.
5. Align the notch of the DDR3 SDRAM module with the protrusion of the socket and gently insert the new module at a 30-45° angle.
6. Push the DDR3 SDRAM module down until the latches on both sides of the socket lock into its position.
7. After aligning the attachment clips with their matching gaps, reinstall the bottom slot cover.
8. 8Reinstall the battery pack. For details, see “Replacing the battery pack”.

To make sure that the DDR3 SDRAM module is installed correctly, do as follows:

1. Press the Novo button to open the Novo button menu.
2. Select the BIOS Setup. The System Memory item shows the total amount of memory installed in your computer.

Replacing the wireless LAN card

Note

• Make sure the computer is turned off and all the cables disconnected from the computer before you replace the LAN card.
• Make sure the computer display is closed to avoid being damaged.

1. Remove the battery pack. For details, see “Replacing the battery pack”.
2. Remove the screws 1, and then remove the bottom slot cover 2.
3. Disconnect the two wireless LAN cables (one black, one white) 3. Remove the screw that secures the wireless LAN card 4.
4. Remove the wireless LAN card 5.
5. Install the new wireless LAN card and tighten the screw to secure the LAN card.
6. Reconnect the two wireless LAN cables (one black, one white).
   • Note: When installing or reinstalling the wireless LAN card, make sure to plug the black cable into the jack labeled AUX and the white cable into the jack labeled MAIN.
7. Reinstall the bottom slot cover and tighten the screws.
8. Reinstall the battery pack. For details, see “Replacing the battery pack” on.

Replacing the optical drive

To replace the optical drive, do the following:

Note

• Make sure the computer is turned off and all the cables disconnected from the computer before you replace the optical drive.
• Make sure the computer display is closed to avoid being damaged.

1. Remove the battery pack. For details, see “Replacing the battery pack”.
2. Remove the screw 1.
   • B40-30/N40-30/B40-70/N40-70/B40-45/N40-45/B40-80/N40-80:
   • B50-30/B50-30 Touch/B50-70/N50-70/B50-45/N50-45/B50-80/N50-80:
3. Gently pull the optical drive out from its cavity 2.
4. Insert a new optical drive and tighten the screw to secure the drive.
5. Reinstall the battery pack. For details, see “Replacing the battery pack”.

Replacing the keyboard

To replace the keyboard, do the following:

Note

• Make sure the computer is turned off and all the cables disconnected from the computer before you replace the keyboard.
• Make sure the computer display is closed to avoid being damaged.

1. Remove the battery pack. For details, see “Replacing the battery pack”.
2. Remove the screws 1.
3. Turn the computer over and open the display panel.
4. Pull to unsnap the keyboard in the direction as shown by the arrows 2,3.
5. Lift up the keyboard 4 and detach the connector in the direction shown by the arrows 5,6.
6. Reinstall the new keyboard and tighten the screws.
7. Reinstall the battery pack. For details, see “Replacing the battery pack”.

The following table provides a list of CRUs for your computer, and informs you of where to find replacement instructions.

Self-service CRUs

Optional-service CRUs

Trademarks

The following terms are trademarks or registered trademarks of Lenovo in the United States, other countries, or both.

• Lenovo
• OneKey
• VeriFace

Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both.
Other company, products, or service names may be trademarks or service marks of others.

First Edition (December 2014)
© Copyright Lenovo 2014.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS- 35F-05925.

References

• Lenovo Support | Drivers, Troubleshooting, Warranty, Repair | Lenovo Support US
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>