Outwell Blossburg 380 Air Bus Awning Tent Instruction Manual

: June 4, 2024
: Outwell

Table of Contents

Outwell Blossburg 380 Air Bus Awning Tent
PITCHING
PACKING AWAY
Cleaning and maintenance tips
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Outwell Blossburg 380 Air Bus Awning Tent

Outwell-Blossburg-380-Air-Bus-Awning-Tent-product

PITCHING

Outwell-Blossburg-380-Air-Bus-Awning-Tent-fig-1

PACKING AWAY

Outwell-Blossburg-380-Air-Bus-Awning-Tent-fig-5

Cleaning and maintenance tips

Congratulations on your innovative new Outwell® vehicle awning, designed and developed to accompany you out into the great outdoors.
Open the carry bag, and note how the awning has been packed as you take it out. This will help you when it is time to pack up the awning. When selecting your campsite, the ideal place is an area that is as level and as free of rocks, branches, and other sharp objects as possible. Spread out the awning and position it with the door facing the desired direction. Avoid placing the awning directly under trees and consider the wind direction. We recommend that you practice pitching your awning before traveling, to familiarise yourself with it.

Under certain weather conditions, condensation can form on the inside of your vehicle awning. To prevent this as far as possible, it is important that wet clothes etc. are removed from the awning. Also make sure to air out the awning, or pitch the awning on an Outwell® groundsheet.

Condensation is not the same as a leak in the awning.
The flysheet is made of waterproof material. You should therefore avoid the interior or anything else coming into contact with the inner side of the flysheet in wet weather, to avoid leaks. Never fully tighten the guy ropes, as this leaves the awning with no leeway to adapt to wind and weather. If strong winds are expected, replace the pegs with special storm pegs. Do not pull the pegs out of the ground using the guy ropes. For stony or hard soil, we recommend stronger u-shaped pegs.

The insecticide should not be sprayed inside or on the awning.
When taking down and packing away the awning, please note that it must be completely dry to avoid moisture damage. We recommend that you wipe down all metal poles using acid-free oil after use.
Remove dirt on the awning using a soft sponge and clean water. Never wash the vehicle awning in a washing machine and never use chemical cleaners. Store the awning in a dry place. Please note that the tape at the seams may come loose after repeated use. If this happens, repair the awning by removing the loose tape and using a seam sealer and waterproofing spray to re-seal the seams. Instructions are available at www. outwell.com/FAQ. If a minor water leak is found from taping this can easily be re-sealed using a seam sealer – the leak can happen from single thread uncovered by tape a simple fold in the covering tape or similar by human-made workflows. We recommend using Outwell Waterguard on regular intervals on the flysheet material to increase the life span.

Note
That the sun’s ultraviolet rays may cause damage to the awning flysheet if it is exposed to direct sunlight for an extended period. The Outtex® material used for Outwell vehicle awnings extends the awning’s lifetime.

Outwell products are made for camping use which is normally 2-5 weeks of usage a year. They are not designed for permanent usage and should only be used as camping products. Camping near the sea or lake can further enhance the effect of UV radiation. The same applies to poles and metal parts. If your awning has a mud valance, you must never pull on this to straighten the awning. The mud valance on the vehicle awning is only designed to keep out wind and water, and cannot handle being pulled on.

Our Air collections are the result of the latest family camping technology and are designed for fast and easy pitching. Please read and follow these instructions to ensure you correctly use the vehicle awning and maximize its service life.

Practice pitching the vehicle awning at home before using it on a trip. Follow the sewn-in pitching instructions or watch the instruction video at www.outwell.com/pitching.
When you pump up the vehicle awning, use the pump gauge to reach the recommended maximum pressure of 9 psi / 0.6 bar.
Air expands as it is warms and contracts as it cools. When the temperature falls at night, the tubes lose pressure and stiffness. This is normal and will rectify itself in the morning when the ambient temperature rises and the air in the tubes expand.
Do not overinflate a cold awning in the morning, as this will lead to a risk of excessive pressure when it gets hotter during the day.
Squeeze the air tubes inside the vehicle awning to feel the pressure. If they are too hard in the middle of the day in hot weather, adjust the pressure by opening the inflation valve to release some air and then connecting the pump and raising the pressure to the recommended 9 psi / 0.6 bar.

If you follow these instructions, you will enjoy many great camping holidays with your awning. For more information on maintenance and tips, please visit our website at outwell.com.

Kind regards
THE OUTWELL TEAM

Please direct product claims and problems to your supplying Outwell dealer.