MAYTAG MDB4949SKW Dishwasher with Dual Power Filtration User Guide

MAYTAG MDB4949SKW Dishwasher with Dual Power Filtration

Product Information

Specifications

• Cycle Guide : Auto
• Water Usage (Gallons/Liters): 3.3 (12.5 L)

Product Usage Instructions

Auto Cycle

• The Auto cycle senses the soil level of the dishes and automatically optimizes the wash cycle. To select the Auto cycle, press the START button first.

Estimated Wash Time: 2:04

Water Usage: 3.3 gallons (12.5 liters)

Power Blast Cycle

• The PowerBlast cycle is designed for hard-to-clean items. Use this cycle to effectively remove tough stains and food residues.

Estimated Wash Time: 2:38

Water Usage: 4.1 gallons (15.4 liters)

Normal Cycle

• The Normal cycle is recommended for daily, regular, or typical  use. It is designed to wash and dry a full load of normally soiled dishes. The government energy certifications for this dishwasher were based on the Normal cycle with only the Heated Dry option selected.

Estimated Wash Time: 2:04

Water Usage: 3.0 gallons (11.2 liters)

Quick Cycle

• The Quick cycle is suitable when you need faster results. It provides a shorter wash time compared to other cycles.

Estimated Wash Time: 1:00

Water Usage: 5.9 gallons (22.4 liters)

Rinse Cycle

• The Rinse cycle is used for rinsing dishes, glasses, and silverware that will not be washed right away. Do not use detergent during this cycle.

Estimated Wash Time: 0:21

Water Usage: 1.7 gallons (6.6 liters)

Pet Pro Cycle

The Pet Pro cycle is specifically designed to sanitize pet dishes faster. Use this cycle to ensure your pet’s dishes are thoroughly cleaned and free from bacteria.

Estimated Wash Time: 90 minutes

Water Usage: 5.6 gallons (21.7 liters)

Options

International NSF/ANSI Standard 184 for Residential Dishwashers.
Refer to the Owner’s Manual for more information.| PowerBlast, Auto, Normal
Short Heated Dry (Some Models)| Dries dishes with heat. Load plastic items in the upper
racks.| PowerBlast, Auto, Normal, Quick
Short Power Dry| Dries dishes with heat and a fan. Load plastic items in the
upper racks.| PowerBlast, Auto, Normal, Quick
Long Heated Dry (Some Models)| Increases energy usage for drying the dishes. This may lengthen
the cycle time.| PowerBlast, Auto, Normal
Long Power Dry| Dries dishes with heat or fan on some models.| PowerBlast, Auto, Normal

Dishwasher Feedback Control

• START: Press to start or resume a wash cycle.
• CANCEL: Press to cancel the wash cycle. Close the door firmly to initiate a 2-minute drain if needed.
• CONTROL LOCK: To activate the Control Lock, press and hold the Heated Dry button for 3 seconds. All buttons will be disabled, and the Control Lock light will stay on. Pressing any button while the dishwasher is locked will cause the light to flash three times. The dishwasher door can still be opened and closed while the controls are locked.

FAQ

• How do I select a cycle?
  • To select a cycle, press the corresponding cycle button on the front panel.
• Can I use detergent during the Rinse cycle?
  • No, the Rinse cycle is specifically designed for rinsing dishes, glasses, and silverware without detergent.
• 3. How do I activate the Control Lock?
  • To activate the Control Lock, press and hold the Heated Dry button for 3 seconds. The Control Lock light will stay on, indicating that all buttons are disabled.
• 4. Can I open the dishwasher door while the controls are locked?
  • Yes, you can still open and close the dishwasher door even when the controls are locked. However, pressing any button during this time will cause the Control Lock light to flash three times.

• IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the cycle for the best wash performance. If the incoming water is less than the recommended temperature of 120° or food soils are heavy, the cycle will automatically compensate by adding time, heat, and water as needed. This information covers several different models. Your dishwasher may not have all of the cycles and options described.

• he government energy certifications are not based on this cycle. See the Normal cycle description for the government energy certification cycle. Using the Sensor cycle may increase your energy usage.

• No other washing and drying temperature options were selected, and it was not subject to truncated testing. Rinse aid was not used, and there was no detergent used in the prewash.

Cancelling a Cycle

1. Open the door slightly to stop the cycle. Wait for the spraying action to stop before completely opening the door.
2. Press and hold START/Resume for 4 seconds. The Cancel/Drain light will turn on.
3. Close the door, and the dishwasher starts a drain cycle (if water remains in bottom of dishwasher). Let the dishwasher drain completely. The Cancel/Drain light turns offafter 3 minutes.

Changing a Cycle After Dishwasher Is Started

You can interrupt a cycle and restart the dishwasher from the beginning using the following procedure.

1. Open the door slightly to stop the cycle. Wait for the spraying action to stop, then open the door completely.
2. Check that detergent dispenser cover is still closed. If cover is open, you will need to refill the detergent dispenser before restarting the new cycle.
3. Press CANCEL/Drain to reset the control.
4. Select new cycles and options.
5. Press START/Resume.

Adding a Dish After Dishwasher is Started

1. Open the door slightly to stop the cycle. Wait for the spraying action to stop, then open the door completely.
2. Check whether the detergent dispenser cover is still closed. If it is open, the wash cycle has already started and adding a dish is not recommended.
3. If detergent has not yet been used (detergent dispenser cover is closed), you may add a dish.
4. Push door firmly closed and press START/Resume within 4 seconds. If you take too long, the Start keypad lightflashes, and you will hear an audible tone. Press START/Resume again and close the door within 4 seconds.

• ®/™ ©2023 Maytag. All rights reserved. Used under license in Canada.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>