NETGEAR 03 Arlo Pro Rechargeable Battery User Guide

Table of Contents

NETGEAR-03-Arlo-Pro-Rechargeable-Battery-product

Specifications
- Includes: Rechargeable battery, Window decal, Camera power adapter cable, Camera power adapter
- The power adapter and cable must be from Arlo Pro to charge the battery
- Camera LED lights solid blue when the battery is fully charged

Inserting the Battery
- Press and hold the latch to unlock the battery compartment
- Gently pull the battery door back to open the compartment
Align the battery contacts
- Insert the battery
- Close the battery door
Charging the Battery
- Place the camera indoors. If using it outside, bring it inside for charging.
- Connect the power adapter cable to the camera power adapter
- Connect the other end of the adapter cable to the camera
- Plug the power adapter into an electrical outlet
- The camera LED will light solid blue when the battery is fully charged
You’re Done!
- Congratulations! Your Arlo Pro camera is set up and ready to go.
- To view useful tutorial videos, find troubleshooting tips, or get support, visit support.arlo.com.
Frequently Asked Questions (FAQ)
- Q: Can I use a different power adapter and cable to charge the battery?
- A: No, you must use an Arlo Pro power adapter and cable to charge the battery. Using a different adapter and cable may damage the battery or camera.
- Q: How long does it take to fully charge the battery?
- A: The charging time may vary depending on the battery level, but it typically takes a few hours to fully charge the battery.
- Q: Can I use the camera while the battery is charging?
- A: Yes, you can use the camera while the battery is charging. However, it is recommended to bring the camera indoors for charging to ensure a stable power source.

$NETGEAR-03-Arlo-Pro-Rechargeable-Battery-fig-1 $1$$

Place the camera indoors. If you are using the camera outside, bring it inside while charging the battery.
Connect the power adapter cable to the camera power adapter.
- Note: You must use an Arlo Pro power adapter and cable to charge the battery.
Connect the other end of the adapter cable to the camera.
Plug the power adapter into an electrical outlet. The camera LED lights solid blue when the camera battery is fully charged.

You’re Done!

Congratulations! Your Arlo Pro camera is set up and ready to go.
To view useful tutorial videos, find troubleshooting tips, or get support, visit support.arlo.com.
©NETGEAR, Inc., NETGEAR, the NETGEAR Logo, and Arlo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only

Compliance

For the current EU Declaration of Conformity, visithttp://kb.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visithttp://www.netgear.com/about/regulatory/.
350 East Plumeria Drive
San Jose, CA 95134, USA
October 2016
NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland $NETGEAR-03-Arlo-Pro-Rechargeable-Battery-fig-1 $7$$