OUTDOOR TECH BUCKSHOT PRO All In One Wireless Speaker Powerbank Flashlight User Guide

June 16, 2024
OUTDOOR TECH

OUTDOOR TECH.JPG

OUTDOOR TECH BUCKSHOT PRO All In One Wireless Speaker Powerbank Flashlight

User Guide

OUTDOOR TECH BUCKSHOT PRO All In One Wireless Speaker Powerbank
Flashlight.JPG

Hi

Good call on picking up the Outdoor Tech@ Buckshot Pro all-in-one speaker, powerbank, flashlight. Your experience of the outdoor world will be fully covered by this little dude.

This manual exists to help make sure you can use ’em to the fullest potential. So sit back, put your feet up, and flip through this  to get to know your Buckshot Pro.
Kisses,

www.outdoortechnology.com

WHAT’S INSIDE

FIG 2 WHAT'S INSIDE.JPG

*Micro USB Cord and instructional manual  are also included in the packaging.

ANATOMY

FIG 3 ANATOMY.JPG

FIG 4 ANATOMY.JPG

FIG 5 ANATOMY.JPG

FIG 6 ANATOMY.JPG

FIG 7 ANATOMY.JPG

*The speaker side should be facing you with the flashlight facing the other direction.

The included rubber bike mount can be used in different ways to accomodate your outdoor lifestyle. Whether its a bike handlebar or your backpack strap, you can be creative in the ways you wrap your Buckshot Pro to any space.

LIGHT ACCESSORY ATTACHMENT

FIG 8 LIGHT ACCESSORY ATTACHMENT.JPG

LIGHT ACCESSORY FUNCTIONS

FIG 9 LIGHT ACCESSORY FUNCTIONS.JPG

POWER UP

FIG 10 POWER UP.JPG

TO CHARGE
1. Connect the included Mlcro USB cord to a power source and the charging port on the
Buckshot Pro. When charging, the red LED light will stav activated. * Full charge time is about 3 hours.
2. When the Buckshot Pro is fully charged, the RED light will turn off.
The displayed battery meter is supported for Apple products.

*The Buckshot Pro’s Bluetooth and music  functions can still operate while charging.

POWER BANK FEATURES

FIG 11 POWER BANK FEATURES.JPG

Charging your devices:

1. Connect the USB Port cable to the Buckshot Pro’s OUTPUT port.
2. Connect the other port to your device.
3. Your device should automatically start charging.
4. When the your device is fully charged, disconnect  the Buckshot Pro.

Remember, the Buckshot Pro shares its 2600 mAh battery with three functions: speaker, powerbank, and flashlight accessory. The amount of charge, music time, light time will vary based on the use of anv of the three functions.

PAIRING MODE

FIG 12 PAIRING MODE.JPG

Power On / Off
ON: Hold the MFB for 2-3 seconds or until the LED light flashes blue and the voice prompt states “Power on”
OFF: Hold the MFB for 3-4 seconds or until the LED light flashes red and the voice prompt states “Power off”

Enter Pairing Mode
When powered on, it will enter into pairing mode automatically. Hold the MFB for 2-3 seconds or until you see the LED light flash blue and the voice prompts states “Power on, Pairing.” The LED lights will then flash red and blue alternately.

Pairing Buckshot Pro to Device

Open the Bluetooth settings on vour device. If you have put your Buckshot Pro into pairing mode, it should be listed as “ODT Buckshot Pro” as an available device to pair. Connect with the Buckshot Pro. The voice prompt will state “Successful” if the Buckshot Pro and your device connected. The blue LED light will flash for as long as the device is connected and on.

*The Buckshot Pro will automatically repair to a previously paired device.

MUSIC FUNCTIONS

FIG 13 MUSIC FUNCTIONS.JPG

FIG 14 MUSIC FUNCTIONS.JPG

PHONE FUNCTIONS

FIG 15 PHONE FUNCTIONS.JPG

FIG 16 PHONE FUNCTIONS.JPG

SPECS

FIG 17 SPECS.JPG

FIG 18 SPECS.JPG

LIGHT ACCESSORY SPECS

FIG 19 LIGHT ACCESSORY SPECS.JPG

CARE & MAINTENANCE

– Do not access the input/output simultaneously.
It mav affect the product’s performance and not  charge properly.
– Use a soft, dry cloth to wipe the surface.
Do not use intensive chemical products or detergent  to clean the product.
– Charge the product at least once every three months,  to prevent the batteries from drying out.
– It is normal for the battery to heat up during its  charge. The temperature should be below 450 & does not affect the Buckshot Pro’s performance.
– For best performance, fully charge the Buckshot Pro before charging other devices.
– All products have passed the strict quality inspection, Do not use the battery/device if it gives off an odor, generates heat, becomes deformed, abrasion, damaged or appears abnormal in anv wav

FIG 21.JPG

Facebook.com/outdoortechnologv
Twitter & Instagram: @outdoortech
Questions, comments, complaints, secret desires, or just to say what’s up: email [email protected]
K bye.

OUTDOOR TECH.JPG

outdoortech.com

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

OUTDOOR TECH User Manuals

Related Manuals