ICStation CAI-266-2 RGB Colorful LED Heart shaped Flashing Lamp DIY Kit Instructions
- June 16, 2024
- Icstation
Table of Contents
CAI-266-2 RGB Colorful LED Heart-shaped Flashing Lamp DIY Kit
CAI-266-2 RGB LED Heart-shaped Flashing Lamp DIY Kit
Introduction:
CAI-266-2 is a RGB Colorful LED Heart-shaped Automatic Flashing Lamp
Electronic Soldering DIY Kit.
Itis powered by two AAA button batteries, automatically flashing and change
various lighting effects within 32 colorful RGB LED. The matched transparent
shell can provide better lighting effects, serve as a bracket to support its
stability, and also serve as a battery case.
It can not only be used as a DIY electronic welding kit that allows you to
better understand the circuit and learn how to soldering, but also as a very
suitable experimental workbench tool.
Feature:
- 32 RGB Colorful LED Automatic Flashing
- Automatic Switch Flashing Effect
- Heart-shaped Appearance Design
- AAA*2 Power Supply Mode
- Multifunctional Transparent Shell
- Setting Free Parameters, Simple and Fast
- Interesting DIY Manual Soldering
Parameter:
- Work voltage: DC 3V
- Display Color: RGB
- Power Type: AAA*2 Battery(NOT Included)
- Work Temperature:-40C~85C
- Work Humidity:5%~95%RH
- Size(Installed):907630mm
Use Method:
- Turn on the power switch and the LED will automatically enter the working state.
- Note: You can use tweezers to switch the status of the power switch.
Component Listing:
| NO. | Component Name | PCB Marker | Parameter | QTY |
|---|---|---|---|---|
| 1 | Metal Film Resistor | R1-R32 | 1Kohm | 32 |
| 2 | Metal Film Resistor | R33 | 10Kohm | 1 |
| 3 | Ceramic Capacitor | C2,C3 | 22pF | 2 |
| 4 | 5mm RGB LED | D1-D32 | Flashing | 32 |
| 5 | Red Wire | 3V+ | 4cm | 1 |
| 6 | Black Wire | 3V- | 4cm | 1 |
| 7 | Electrolytic Capacitor | C1 | 10uF | 1 |
| 8 | 3Vto5V Boost Power Supply Module | P2 | 14111mm | 1 |
| 9 | STC89C52RC Controller | U1 | DIP-40 | 1 |
| 10 | IC Socket | U1 | DIP-40 | 1 |
| 11 | Crystal Oscillator | Y1 | 12MHz | 1 |
| 12 | SMD Power Switch | S1 | 6Pin | 1 |
| 13 | Self Tapping Screw | 7mm | 1 | |
| 14 | Self Tapping Screw | 5mm | 1 | |
| 15 | Battery Metal Connector | 3 | ||
| 16 | Foam Spacer | 50•23•3mm | 1 | |
| 17 | Transparent Top Shell | 1 | ||
| 18 | Transparent Bottom Shell | 1 | ||
| 19 | PCB Circuit Board | 84*68mm | 1 |
Note:Users can complete the installation according to the PCB silk screen and component list.
Schematic Diagram:
Application:
- Training welding skills
- Student school
- DIY production
- Project Design
- Electronic competition
- Gift giving
- Crafts collection
- Home decoration
- Souvenir collection
- Graduation design
- Holiday gifts
Installation Tips:
-
User needs to prepare the welding tool at first.
1.1> Soldering iron (<50 Watt)
1.2> Rosin core (“radio”) solder
1.3>.Wire cutters
1.4> Wire strippers
1.5>.Screwdriver -
Please be patient until the installation is complete.
-
The package is DIY kit.It need finish install by user.
-
The soldering iron can’t touch the components for a long time(1.0 second), otherwise it will damage the components.
-
Pay attention to the positive and negative of the components.
-
Strictly prohibit short circuit.
-
User must install the LED according to the specified rules.Otherwise some LED will not light.
-
Install complex components preferentially.
-
Make sure all components are in right direction and right place.
-
It is strongly recommended to read the installation manual before starting installation!!!0
-
Please wear anti-static gloves or anti-static wristbands when installing electronic components.
Installation Steps(Please be patient install!!!):
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>