ICStation HE002 Police Car Soldering Practice Kit Instructions
- June 1, 2024
- Icstation
Table of Contents
ICStation HE002 Police Car Soldering Practice Kit
Specifications
- Work voltage: DC 5V
- Display Color: Red/Blue
- Power Type: DC-002
- Work Temperature: -40°C to 85°C
- Work Humidity: 5% to 95% RH
- Size (Installed): 89 x 60 x 23mm
Product Usage Instructions
Power On:
Turn on the power switch S1 to activate the LED/Buzzer, entering the working state.
Switch LED Flashing Effect:
Press the S2_MOD button to switch between different LED flashing effects.
Switch LED Flashing Frequency:
Press the S3_FRE button to change the LED flashing frequency.
FAQ
Q: What tools are needed for installation?
A: Users need to prepare the following tools:
- Soldering iron
- Rosin core (radio) solder
- Wire cutters
- Wire strippers
Q: What are the applications of HE002 Flashing LED Police PCB Car DIY Kit?
A: The kit can be used for:
- Training welding skills
- Student school projects
- DIY production
- Project Design
- Electronic competitions
- Gift giving
- Crafts collection
- Home decoration
- Souvenir collection
- Graduation design projects
- Holiday gifts
Introduction
HE002 is a Red/Blue Automatic Flashing LED Police PCB Car Electronic Soldering DIY Kit. It is powered by 5V voltage from DC-002 interface and automatically flashing and change various lighting effects within Red and Blue LED. Simultaneously simulating the sound of police car horns. It can not only be used as a DIY electronic welding kit that allows you to better understand the circuit and learn how to soldering, but also as a very suitable experimental workbench tool.
Feature:
- 8 Red/Blue LED Automatic Flashing
- Switchable 3 LED Flashing Effect
- Switchable Fast and Snow Flashing Frequency
- Simulate Police Cars Sound
- Police Car Exterior Design
- Interesting DIY Manual Soldering
Parameter:
- Work voltage: DC 5V
- Display Color: Red/Blue
- Power Type: DC-002
- Work Temperature:-40℃~85℃
- Work Humidity:5%~95%RH
- Size(Installed):896023mm
Use Method:
- Turn on the power switch S1 and the LED/Buzzer will automatically enter the working state.
- Switch LED Flashing Effect by press S2_MOD button.
- Switch LED Flashing Frequency by press S3_FRE button.
Component Listing
| NO. | Component Name | PCB Marker | Parameter | QTY |
|---|---|---|---|---|
| 1 | STC15W204S Controller | U1 | DIP-16 | 1 |
| 2 | IC Socket | U1 | DIP-16 | 1 |
| 3 | Red LED | D1-D4 | 5mm | 4 |
| 4 | Blue LED | D5-D8 | 5mm | 4 |
| 5 | Passive Buzzer | Beep | 5V | 1 |
| 6 | 1N5819 Schottky Diode | D9 | DO-41 | 1 |
| 7 | S8550 Transistor | Q1 | TO-92 | 1 |
| 8 | SS-12F44 1P2T Toggle Switch | S1 | 5Pin | 1 |
| 9 | Black Button | S2,S3 | 667mm | 2 |
| 10 | Button Cap | S2,S3 | 6*6mm | 2 |
| 11 | Ceramic Capacitor | C4 | 0.1UF 104 | 1 |
| 12 | Metal Film Resistor | R12,R13 | 1K | 2 |
| 13 | Metal Film Resistor | R1-R8 | 220ohm | 8 |
| 14 | Metal Film Resistor | R9,R10 | 10ohm | 2 |
| 15 | Metal Film Resistor | R11 | 2K | 1 |
| 16 | DC-002 Power Socket | DC_5V | 3.5*1.3mm | 1 |
| 17 | USB to DC002 Power Wire | DC_5V | 60cm | 1 |
| 18 | Black PCB Circuit Board | / | 89*60mm | 1 |
Note:Users can complete the installation according to the PCB silk screen and component list.
Schematic Diagram
Application
- Training welding skills
- Student school
- DIY production
- Project Design
- Electronic competition
- Gift giving
- Crafts collection
- Home decoration
- Souvenir collection
- Graduation design
- Holiday gifts
Installation Tips
- User needs to prepare the welding tool at first.
- Soldering iron (<50 Watt)
- Rosin core (“radio”) solder
- Wire cutters
- Wire strippers
- Please be patient until the installation is complete.
- The package is DIY kit.It need finish install by user.
- Soldering iron can’t touch components for a long time(1.0s), otherwise damage the components.
- Pay attention to the positive and negative of the components.
- Strictly prohibit short circuit.
- User must install the LED according to the specified rules.Otherwise some LED will not light.
- Install complex components preferentially.
- Make sure all components are in right direction and right place.
- It is strongly recommended to read the installation manual before starting installation!!!
- Please wear anti-static gloves or anti-static wristbands when installing electronic components.
Installation Steps
(Please be patient install!):
