waterpik WP-811 Water Flosser Complete Care Pump User Guide
- May 15, 2024
- Waterpik
Table of Contents
Waterpik WP-811 Water Flosser Complete Care Pump
Product Information
Specifications
- Model: WP-810/811/812
- Compatible Voltages: 120 VAC, 60Hz
Product Usage Instructions
First Use
Before using the product for the first time, it is recommended to review the full instruction book.
Start Water Flossing
- Fill the reservoir with warm water.
- Replace the reservoir firmly on the base.
- Turn the pressure to high.
- Point the tip into the sink.
- Turn on the power and water switches until water starts to flow.
- Turn off the power and water switches.
Insert Tip
To avoid mess, place the tip in your mouth before turning the unit on.
- Turn on the power and water switches.
- Start with low pressure and increase it to your liking.
- Insert the tip firmly until it clicks into place.
Technique
Lean over the sink while using the product.
Close your lips enough to prevent splashing, while still allowing water to flow from your mouth into the sink.
How-To Video
You can watch a video demonstration on how to use the product at waterpik.com/HowTo811.
FAQ
Q: What voltages is the device compatible with?
A: The device is only compatible with voltages of 120 VAC, 60Hz.
References
Read User Manual Online (PDF format)
Loading......