ZEBRONICS JUMBO Lite Wireless Neckband Earphone User Manual
- June 9, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS JUMBO Lite Wireless Neckband Earphone User Manual
Thank You for purchasing JUMBO LITE Wireless neckband earphone. Please read this user manual carefully before operation & save it for future reference.
Note:
- Please full charge the product with a power adapter output rated DC 5V before first time usage.
- Do not self-disassemble the product or it will result in the failure of warranty.
- Make sure not to use this product at any high-temperature or high humidity environment.
Caution: Listening at high volume can cause hearing impairment. Please limit your usage time at high volume.
Features
Wireless BT earphone with Neckband
Volume/Media Control
Call Function
Magnetic Earpiece
Splash Proof
Voice Assistant support
Built-In Rechargeable Battery
Flexible Neckband
Type-C Charging
Environmental Noise Cancellation (ENC)
Gaming Mode (Low Latency)
Dual Pairing
Specifications
BT Version : 5.2
Supported BT Profile : HSP / SPP / A2DP / AVRCP
Drive size : 14.2mm
Speaker impedance : 320
Playback time : 75h
Charging time : 2h
Talk time : 48-50h
Standby time : 500h
Net. weight : 42g
Package contents
Neckband : 1 U
Eartips : 4 U
Charging cable : 1 U
QR Code Guide : 1 U
Usage Instruction:
Bluetooth Pairing Instructions:
STEP 1 – Press and hold the MFB to power ON the earphones and to take
them into pairing mode with Red & Blue LED blinking alternatively.
STEP 2 – Switch ON the Bluetooth in your mobile phone & search for the BT
name “JUMBO LITE”
STEP 3 – Once the BT name is visible in your mobile phone, tap to connect
it.
PRODUCT REPRESENTATION
Button Usage:
MFB Single Press : Play/Pause the music
MFB Double Press : Switch mode between Gaming / Music mode
MFB Press & Hold : Wakes Voice assistant
MFB Long Press : Call Reject
Short Press +/- : Volume Up and Down
Long Press +/- : Next / Previous track
Activating Smart Phone’s Voice Assistant:
When the neckband is connected to a mobile phone, Press and hold the MFB for 3
seconds to activate voice assistant.
Note: Smart phone should have an active Internet connection to use the voice assistant function.
Call Function:
- Short press the MFB to attend or end the incoming call.
- Press and Hold the MFB for 2 seconds to reject the incoming call.
Charging Instruction:
Connect the Type-C charging cable to the charging port of the earphones &
connect the other end to the DC 5V adapter.
LED Indication:
Charging indication : Red LED glows
Full charge indication : LED turns Off
BT Discover mode : Red & Blue LED blinks rapidly till it gets paired.
Connection Established : Blue LED will blink once in an interval of 5sec.
ISO 9001:2015 Certified Company www.zebronics.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>