waterpik WP-462 Water Flosser User Guide

June 16, 2024
Waterpik

WP_ShwrLockup_287CMYK_highres

waterpik WP-462 Water Flosser

waterpik-WP-462-Water-Flosser-product

Specifications

PRESSURE RANGE 3.160 to 5.270 kg/cm2
FLOW RATE PER MINUTE 300 ML
PULSES PER MINUTE 1450
NUMBER OF PRESSURE SETTINGS 2
INCLUDED FLOSSER TIPS 4
WATER ON/OFF SWITCH ON HANDLE On/Off Slider
ROTATING TIP 360 degree
RESERVOIR CAPACITY 210 ML
CAPACITY IN SECONDS 45
RESERVOIR COVERED Yes
HEIGHT (WITH TIP/BRUSH) 29.59 cm
MAX WIDTH (BASE) 6.95 cm
MAX DEPTH (BASE) 9.65 cm
UNIT WEIGHT 0.337 kg
SHIPPING WEIGHT 0.620 kg
RECHARGEABLE BATTERY Yes – Standard Charging System
ELECTRIC OUTLET 220V
BATTERY REPLACEABLE No
BATTERY TYPE NiMH
WARRANTY 24 months
LED CHARGING INDICATOR No
TRAVEL BAG No

Description

The WP-462 Cordless Plus Black water flosser with its satin finish takes up little space and include four unique tips:

  • Classic Jet tip for general use.
  • The Plaque Seeker tip is best for implants, crowns, veneers and bridges and removes plaque in hard-to-reach areas.
  • The orthodontic tip is ideal for braces and is 3x as effective as floss for removing plaque around orthodontic appliances.
  • Tongue cleaner removes bacteria from the tongue to freshen breath.

The advanced dual water pressure control system of the Cordless Plus allows you to adjust water pressure intensity according to your preference. The design is ergonomic and includes an easy-to-fill reservoir and a rechargeable battery.

Features

  • New black satin finish.
  • 360-degree tip rotation to reach all areas of the mouth.
  • Dual-pressure control in-handle.
  • Reservoir with 45 seconds water capacity.
  • Perfect for travel.
  • Works on 220V.

Waterpik® Water Flossers, also known as Dental Water Jets, provide a unique combination of water pressure and pulsations to massage and stimulate gums, and clean deep between teeth and below the gumline where traditional string floss can’t reach.

QUICK START GUIDE

  1. Charge Unit for 24 Hours Prior to First Use.
    Turn the power switch OFF, plug the power cord into an outlet, and insert the charging cord into the unit.

  2. Insert Tip:
    Select the appropriate tip and insert it into the unit. Press firmly until the tip clicks into place. To remove tip, push the tip eject button.

  3. Fill the Reservoir:
    Unplug the charging cord from unit prior to filling it with water and during use.
    Lift the flip top on the reservoir and fill it with lukewarm water. Refill as needed.

  4. Usage:
    For first-time use, adjust the pressure setting to the LOW setting.
    Pressure Setting
    To increase water pressure move to Hl setting.

  5. On/Off Procedure:
    Always place the tip in the mouth before turning the unit on.
    Lean over the sink and close your lips enough to prevent splashing, while still allowing water to flow from mouth into the sink. Turn the unit ON .waterpik-WP-462-Water-Flosser-fig- \(5\)
    Keep the unit upright during use to ensure continuous water flow.

  6. Technique Tips for Best Results:
    Aim the water stream just above the gumline at a 90-degree angle.

  7. REGISTER YOUR PRODUCT ONLINE NOW!
    Receive up to $44 in savings on the purchase of additional Waterpik® products. www.waterpik.com/registration

Water Pik, Inc. 1.800.525.2774 1730 East Prospect Road, Fort Collins, CO 80553-0001 USA www.waterpik.com 02014 Water Pik, Inc. FN 20019052-F AA

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals