Shark WS620 Wandvac Cordless Vacuum Owner’s Manual

: June 16, 2024
: Shark

Table of Contents

Shark WS620 Wandvac Cordless Vacuum
Product Information
Product Usage Instructions:
IMPORTANT SAFETY INSTRUCTIONS
ASSEMBLY
LI-ION BATTERY
CHARGING AND STORAGE
STORAGE AND CONTROLS
CLEANING MODES
MAINTAINING YOUR VACUUM
TROUBLESHOOTING
FIVE (5) YEAR LIMITED WARRANTY
TECHNICAL SPECIFICATIONS
BATTERY REMOVAL AND DISPOSAL
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Shark WS620 Wandvac Cordless Vacuum

Product Information

Specifications:

Model: WS620, WS630, WS631, WS632
Type: Cordless Vacuum
Power Source: Battery
Components: Motorized Quick Nozzle, Wand, Handheld Vacuum
Usage: General cleaning on various surfaces

Product Usage Instructions:

Important Safety Instructions:

If the charging cord plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT force into an outlet or try to modify to fit.
To reduce the risk of shock and unintended operation, turn off power and remove the battery before servicing.

Warnings:

The floor nozzle, wand, and handheld vacuum contain electrical connections and moving parts that potentially present a risk to the user.
Before each use, carefully inspect all parts for any damage. If a part is damaged, discontinue use.
Use only identical replacement parts.
This vacuum contains no serviceable parts.
Use only as described in this manual. DO NOT use the vacuum for any purpose other than those described in this manual.
Except for the filters and dust cup, DO NOT expose any parts of the vacuum to water or other liquids.
Keep the appliance and its cord out of reach of children. Do not allow the appliance to be used by children. Do not allow it to be used as a toy. Close supervision is necessary when used near children.

General Use:

This appliance can be used by persons with reduced physical, sensory, or mental capabilities or lack of experience or knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be done by children.
Always turn off the vacuum before connecting or disconnecting any current-carrying hoses, motorized nozzles, chargers, batteries, or other electrical or mechanical parts.
DO NOT handle the plug or vacuum with wet hands.
DO NOT use without a dust cup, filters, and brush roll in place.
DO NOT put any objects into the nozzle or accessory openings. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
DO NOT use if nozzle or accessory airflow is restricted. If the air paths or the motorized floor nozzle become blocked, turn the vacuum off. Remove all obstructions before you turn on the unit again.
Keep the nozzle and all vacuum openings away from hair, face, fingers, uncovered feet, or loose clothing.
DO NOT use if the vacuum is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water.
Use extra care when cleaning on stairs.
DO NOT leave the vacuum unattended while powered on.
When powered on, keep the vacuum moving over the carpet surface at all times to avoid damaging the carpet fibers.
DO NOT place the vacuum on unstable surfaces such as chairs or tables.
DO NOT use to pick up:
- Liquids
- Large objects
- Hard or sharp objects (glass, nails, screws, or coins)
- Large quantities of dust (including drywall, fireplace ash, or embers). DO NOT use as an attachment to power tools for dust collection.

FAQ:

Q: Can I use this vacuum to clean my hardwood floors?
A: Yes, you can use this vacuum on hardwood floors. However, make sure to use the appropriate attachment and avoid using excessive force to prevent scratches.
Q: How often should I clean or replace the filters?
A: It is recommended to clean or replace the filters according to the instructions provided in the user manual. The frequency may vary depending on usage and the environment.

IMPORTANT SAFETY INSTRUCTIONS

FOR HOUSEHOLD USE ONLY PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM.

If the charging cord plug does not fit fully into the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. DO NOT force it into an outlet or try to modify to fit.
To reduce the risk of shock and unintended operation, turn off power and remove the battery before servicing.

WARNING
To reduce the risk of fire, electric shock, injury, or property damage:

THE FLOOR NOZZLE, WAND, AND HANDHELD VACUUM CONTAIN ELECTRICAL CONNECTIONS:

This vacuum consists of a motorized nozzle, wand, and handheld vacuum. These components contain electrical connections, electrical wiring, and moving parts that potentially present risk to the user
Before each use, carefully inspect all parts for any damage. If a part is damaged, discontinue use.
Use only identical replacement parts.
This vacuum contains no serviceable parts.
Use only as described in this manual.
DO NOT use the vacuum for any purpose other than those described in this manual.
With the exception of the filters and dust cup, DO NOT expose any parts of the vacuum to water or other liquids.
Keep the appliance and its cord out of reach of children. Do not allow the appliance to be used by children. Do not allow it to be used as a toy. Close supervision is necessary when used near children.
GENERAL USE
This appliance can be used by persons with reduced physical, sensory, or mental capabilities or lack of experience or knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way
and understand the hazards involved. Cleaning and user maintenance shall not be done by children.
Always turn off the vacuum before connecting or disconnecting any current-carrying hoses, motorized nozzles, chargers, batteries, or other electrical or mechanical parts.
DO NOT handle the plug or vacuum with wet hands.
DO NOT use without a dust cup, filters, and brushroll in place.
Only use Shark® branded filters and accessories.
DO NOT put any objects into the nozzle or accessory openings. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
DO NOT use if nozzle or accessory airflow is restricted. If the air paths or the motorized floor nozzle become blocked, turn the vacuum off. Remove all obstructions before you turn on the unit again.
Keep the nozzle and all vacuum openings away from hair, face, fingers, uncovered feet, or loose clothing.
DO NOT use if the vacuum is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water.
Use extra care when cleaning on stairs.
DO NOT leave the vacuum unattended while powered on.
When powered on, keep the vacuum moving over the carpet surface at all times to avoid damaging the carpet fibers.
DO NOT place vacuum on unstable surfaces such as chairs or tables.
DO NOT use to pick up:
a) Liquids
b) Large objects
c) Hard or sharp objects (glass, nails, screws, or coins)
d) Large quantities of dust (including drywall, fireplace ash, or embers).
DO NOT use as an attachment to power tools for dust collection.
e) Smoking or burning objects (hot coals, cigarette butts, or matches)
f) Flammable or combustible materials (lighter fluid, gasoline, or kerosene)
g) Toxic materials (chlorine bleach, ammonia, or drain cleaner)
DO NOT use in the following areas:
a) Poorly lit areas
b) Wet or damp surfaces
c) Outdoor areas
d) Spaces that are enclosed and may contain explosive or toxic fumes or vapors (lighter fluid, gasoline, kerosene, paint, paint thinners, mothproofing substances, or flammable dust)
Turn off the vacuum before plugging in or unplugging the charger.
Turn off the vacuum before any adjustment, cleaning, maintenance, or troubleshooting.
During cleaning or routine maintenance, DO NOT cut anything other than hair, fibers, or string wrapped around the brush roll.
Allow all filters to air-dry completely before replacing them in the vacuum to prevent liquid from being drawn into electric parts.
DO NOT modify or attempt to repair the vacuum or the battery yourself, except as indicated in this manual.
DO NOT use the battery or vacuum if it has been modified or damaged. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
Turn off all controls before unplugging.
Always turn off this appliance before connecting or disconnecting the motorized nozzle or hand tool.
BATTERY PACK
The battery is the power source for the vacuum. Carefully read and follow all charging instructions.
To prevent unintentional starting, ensure the vacuum is powered off before picking up or carrying the vacuum. DO NOT carry the appliance with your finger on the power switch.
Use only Shark® charger
DK12-133090A-U or E-TEK ZD012S133090USD. Use of an incorrect charger may result in no charging, and/or unsafe conditions.
Use only with Shark battery pack XSBT330.
Keep the battery away from all metal objects such as paper clips, coins, keys, nails, or screws. Shorting the battery terminals increases the risk of fire or burns.
Under abusive conditions, liquid may be ejected from the battery. Avoid contact with this liquid, as it may cause irritation or burns. If contact occurs, flush with water. If liquid contacts eyes, seek medical help.
Battery should not be stored at temperatures below 37.4°F (3°C) or above 104°F (40°C) to maintain long-term battery life.
DO NOT charge battery at temperatures below 40°F (5°C) or above 104°F (40°C).
Store the appliance indoors. DO NOT use or store it below 37.4°F (3°C). Ensure the appliance is at room temperature before operating.
DO NOT expose the battery to fire or temperatures above 265°F (130°C) as it may cause an explosion.

ASSEMBLY

Insert Wand into POWERFIN Floor Nozzle.
Insert Handheld Vacuum into the wand. For proper operation, ensure all components are completely connected and clicked into place. NOTE : Your vacuum’s model and serial numbers can be found on the QR code label on the bottom of the back of the handheld vacuum.
Make sure the Dock Plate is facing upright. Slide the Charging Post into the slot on the back of the dock until it clicks into place.
Place the dock on the floor near a wall outlet. Plug the Wall Charger into the outlet, then connect the cord to the port on the back of the charging post.
Store cleaning accessories on the mount on the dock plate.
NOTE : Once the charging post is installed, it can’t be removed.

LI-ION BATTERY

Prior to first use, charge the battery completely. A full charge takes approximately 3 hours.

RUNTIMES PER FULLY CHARGED BATTERY
Visit sharkclean.com/support online or review the included Quick Start Guide.

LED BATTERY POWER AND CHARGING INDICATORS

For an added boost of power, push and hold the button on the handle. The Boost icon will blink white in this mode. Release the button to return to standard power.

Charging NOTE: Full charge takes approximately 3 hours.

In Use RECYCLING THE LI-ION BATTERY
When the Shark® Li-Ion battery needs to be replaced, dispose of it or recycle it by local ordinances or regulations. In some areas, it is illegal to place spent lithium-ion batteries in the trash or in a municipal solid waste stream. Return spent batteries to an authorized recycling center or to the retailer for recycling. Contact your local recycling center for information on where to drop off the spent battery.

NOTE : The Shark battery, like all lithium-ion batteries, will naturally decrease in capacity over time from the 100% capacity of a new battery.

CHARGING AND STORAGE

Plug the Charger into a wall outlet.
To remove the battery from the handheld vacuum or the charging post, press the release tabs on the battery cap and slide out the battery. To reinstall, slide the battery into the compartment in the handle, or into the slot in the dock charging post.

When docked properly, the charging lights on the handheld vacuum will blink, indicating that charging has begun. When charging is complete, all three indicator lights will illuminate steadily.

OPTION 1 – IN CHARGING DOCK
When the dock is assembled and plugged in, charge the unit by placing it on the dock plate, with the hook on the back of the wand over the charging post. Make sure the contacts on the wand are aligned with the contacts on the charging port.
To use Wandvac System, lift the unit upward to release from dock.

OPTION 2 – CHARGING HANDHELD VACUUM
To charge the handheld vacuum alone without the dock, unplug the charger cord from the dock and connect it directly to the port on the handheld vacuum, near the nozzle opening.

NOTE : The main unit comes with a partial charge. For maximum runtime, charge fully before first use (approximately 3 hours). Leaving the unit plugged in will not damage battery life.

STORAGE AND CONTROLS

To set the Wandvac System aside during use, attach the wand clip to the front of the wand.
Lock the nozzle and wand in the upright position, and detach the handvac using the one-touch release buttons on either side of the handle. Slide the handvac into place over the wand clip, with the filter removal latch on the back of the handvac sitting inside the clip.
To remove, slide the handvac up and out. To remove the handvac storage clip, pull it off the wand.
Press the On/Off button on the handle to turn on power. To turn off the power, press the button again.

CLEANING MODES

Use the floor nozzle for powerful cleaning on both bare floors and carpets.
Attach the desired accessory to a handheld vacuum. Press buttons on both sides of the handle to remove the accessory.

NOTE : The brush roll is activated when the handheld vacuum is connected, powered on, and the handle is tilted back.

Detach the handheld vacuum from the wand for quick and easy cleaning above the floor.
Press the buttons on both sides of the handle, and lift the handheld vacuum off the wand.
To reattach the handheld vacuum to the wand, align the nozzle over the top of the wand and slide it on until it clicks into place.
For more reach to clean above-floor areas, detach the floor nozzle from the wand. Step on the floor nozzle, and press the nozzle release button at the bottom of the wand. Lift the wand to remove it.
To reattach the wand, align it over the nozzle neck, then slide it on until it clicks into place.

NOTE : All accessories are compatible with both the wand and the handheld vacuum.

MAINTAINING YOUR VACUUM

EMPTYING THE DUST CUP

With the power off, slide the release button forward, and the dust cup will swing open. Tap the filter screen lightly to knock off dust and debris.
Wipe dust screen lightly with cloth to remove dust and dirt.

CLEANING THE DUST CUP AND FILTER

With the dust cup open and the power off, press the filter release latch below the handle and pull out the filter housing.
Press the tabs on both sides of the filter housing and pull out the filter. To clean the filter, hand-wash only with water and let air-dry for 24 hours before reinstalling. To reinstall the filter, slide it back into place in the main body of the handvac unit and press until it clicks into place.
To reinstall the filter housing, insert it into the dust cup, pressing it until it clicks into place.
NOTE : Do not wash any parts or accessories in a dishwasher.
To deep clean the dust cup and cyclone, locate thewire handle on the cyclone frame and use this to gently pull the cyclone frame out of the dust cup.
Rinse or wipe clean the exposed dust cup with water or a damp cloth and let air-dry for 24 hours.
When the dust cup is completely dry, click the cyclone back into place inside the dust cup. Make sure the wire handle is tucked away before reassembling the handvac.

NOZZLE MAINTENANCE

Turn off the vacuum.
Press the nozzle release button to detach the nozzle from the wand.
Using a coin, turn the 4 locks counterclockwise to open, then lift off the cover and tilt back the neck of the nozzle.
Clear any blockages and remove any debris from the brushroll and floor nozzle.
With the nozzle cover removed, wipe the brushroll clean with a dry towel.
Replace the cover by sliding the tabs into the slots. Press down firmly on all sides. Turn locks clockwise to close, until they click into place.

CHECKING FOR BLOCKAGES

If you run over a hard or sharp object or notice a noise change while vacuuming, check for blockages or objects caught in the brushroll.

Checking for Blockages in the Handheld Vacuum:

Turn off the vacuum.
Remove the handheld vacuum from the wand.
Check all intake openings to the dust cup and remove any debris or blockages.

Checking for Blockages in the Wand:

Turn off the vacuum.
Detach the handheld vacuum and floor nozzle from the wand.
Check both ends of the wand for blockages and debris.
lear away any debris or blockages.

Checking for Blockages in the Floor Nozzle:

Turn off vacuum
Detach the wand
Use the edge of a coin to open the 4 locks on the bottom of the floor nozzle
Remove the cover and tilt back the neck of the floor nozzle
Check the opening and remove any debris
Replace cover by firmly pressing down on all sides and turning the locks counterclockwise

TROUBLESHOOTING

WARNING : To reduce the risk of shock and unintended operation, turn off power and remove the battery before servicing.

The vacuum is not picking up debris. No suction or light suction. The third indicator light on the handheld vacuum is solid yellow.
(Refer to Checking for Blockages section for more information.)

Dust cup may be full; empty dust cup.
Check floor nozzle for blockages; clear blockages if required.
Remove any string, carpet fibers, or hair that may be wrapped around the brush roll.
Check the connection between the handheld vacuum and wand for blockages; clear blockages if required.
Check clog access opening in the wand for any blockages and clear any debris.
Check filters to see if they need cleaning. Follow instructions for rinsing and completely air-drying the filters before reinstalling them.

Vacuum lifts area rugs.

Make sure you are not engaging boost mode. Take care when vacuuming area rugs or rugs with delicately sewn edges.
Turn off the unit to disengage from the carpet, then restart.

My vacuum has a Powerfin nozzle but the brushroll doesn’t spin.

Immediately turn off the vacuum. Remove any blockages before turning the vacuum back on. Make sure the handheld vacuum is tilted back far enough for the brush roll to engage while in use.
If the floor nozzle has headlights and they are not illuminated, there is a connection issue between the handheld vacuum, wand, and nozzle. Try disconnecting and reattaching the pieces.

The vacuum turns off on its own.
There are several possible reasons for the vacuum turning off on its own, including blockages, battery issues, and overheating. If the vacuum turns off on its own, perform the following steps:

Turn on the vacuum and check the battery indicator lights on the handheld vacuum. If recharging is needed, make sure the vacuum power is off before plugging in the charger.
Empty the dust cup and clean the filters (See the Cleaning the Dust Cup and Filter section).
Check wand, accessories, and inlet openings and remove any blockages.
Allow unit and battery to cool for at least 45 minutes, until they return to room temperature.
Press the On/Off switch to restart the vacuum.

NOTE : If the vacuum still does not operate properly, contact Customer Service at 1-800-798-7398 or sharkclean.com/support.

Battery Indicator Lights on handheld vacuum are flashing.

The top LED is flashing (Fig. A): The battery needs to be charged.
The bottom LED is solid yellow (Fig. B): Nozzle clog. (See the Maintaining Your Vacuum section.)
Bottom LED blinking yellow (Fig. C): There may be an electrical problem with the nozzle. Contact Customer Service at 1-800-798-7398 or sharkclean.com

ADDITIONAL ACCESSORIES AVAILABLE ON SHARKACCESSORIES.COM

A Crevice Tool
B Duster Crevice Tool
C Replacement Battery
D Li-Ion Charger
E Upholstery Tool
F Wide Upholstery Tool
G Pet Multi-Tool
H Motorized Hand Tool
I Battery Charging Sleeve
J Dust Cup Care Tool

NOTE : Not all accessories come with all units. Please see the enclosed Quick Start Guide for your unit’s configuration. To order additional accessories, visit sharkaccessories.com.

FIVE (5) YEAR LIMITED WARRANTY

The Five (5) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for five (5) years from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:

What is covered by this warranty?

The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced up to five (5) years from the original purchase date.
I n the event a replacement unit is issued, the warranty coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is later. SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered by this warranty?

Normal wear and tear of wearable parts (such as foam filters, HEPA filters, pads, etc.), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty. Replacement parts are available for purchase at sharkaccessories.com.
Any unit that has been tampered with or used for commercial purposes.
Damage caused by misuse (e.g., vacuuming up water or other liquids), abuse, negligent handling, failure to perform required maintenance (e.g., not cleaning the filters), or damage due to mishandling in transit.
Consequential and incidental damages.
Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the repair is performed by a repair person not authorized by SharkNinja.
Products purchased, used, or operated outside North America.

How to get service
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit sharkclean.com/support for product care and maintenance self-help. Our Customer Service Specialists are also available at 1-800-798-7398 to assist with product support and warranty service options, including the possibility of upgrading to our VIP warranty service options for select product categories. We also ask that you register your product online at registeryourshark.com and have the product on hand when you call, so we may better assist you.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of
$24.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.

How to initiate a warranty claim
You must call 1-800-798-7398 to initiate a warranty claim. To better assist you please register your product before calling and have your product with you at the time of your call. You will need the receipt as proof of purchase. A Customer Service Specialist will provide you with return and packing instruction information. We also ask that you register your product online at registeryourshark.com and have the product on hand when you call, so we may better assist you.

How state law applies
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

TWO (2) YEAR LIMITED BATTERY WARRANTY

The Two (2) Year VIP Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
SharkNinja warrants that the battery shall be free from defects in material and workmanship for a period of two (2) years from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:

What is covered by this warranty?

The original battery deemed defective, in SharkNinja’s sole discretion, will be replaced up to two (2) years from the original purchase date.
In the event a replacement battery is issued, the warranty coverage ends six (6) months following the receipt date of the replacement battery or the remainder of the existing warranty, whichever is later. SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered by this warranty?

Normal wear and tear of the battery, which requires optimal temperature storage and operation to ensure its proper functioning. Replacement batteries are available for purchase at sharkclean.com/batteries .
A battery that has been tampered with or used for commercial purposes.
Damage caused by misuse (e.g., exposing battery to liquids or extreme hot and/or cold temperatures), abuse, negligent handling, failure to perform required maintenance, or damage due to mishandling in transit.
Consequential and incidental damages.
Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the repair is performed by a repair person not authorized by SharkNinja.
Products purchased, used, or operated outside North America.

How to get service
If your battery fails to operate properly while in use under normal household conditions within the warranty period, visit sharkclean.com/support for product care and maintenance self-help. Our Customer Service Specialists are also available at 1-800-798-7398 to assist with product support and warranty service options. So we may better assist you, please register your product online at registeryourshark.com and have the product on hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for replacement. A fee of $19.95 (subject to change) will be charged when SharkNinja ships the replacement unit.

How to initiate a warranty claim
You must call 1-800-798-7398 to initiate a warranty claim. You will need the receipt as proof of purchase. We also ask that you register your product online at registeryourshark.com and have the product on hand when you call, so we may better assist you. A Customer Service Specialist will provide you with return and packing instruction information when you call.

How state law applies
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

REGISTER YOUR PURCHASE

registeryourshark.com

RECORD THIS INFORMATION

TIP : You can find the model and serial numbers on the QR code label on the bottom of the back of the handheld vacuum and battery.

TECHNICAL SPECIFICATIONS

Voltage: 11.1V

BATTERY REMOVAL AND DISPOSAL

This product uses a lithium-ion rechargeable and recyclable battery. When the battery no longer holds a charge, it should be removed from the vacuum and recycled. DO NOT incinerate or compost the battery. When your lithium-ion battery needs to be replaced, dispose of it or recycle it per local ordinances or regulations. In some areas, it is illegal to place spent lithium-ion batteries in the trash or in a municipal solid waste stream. Return spent battery to an authorized recycling center or to a retailer for recycling. Contact your local recycling center for information on where to drop off the spent battery. The RBRC™ (Rechargeable Battery Recycling Corporation) seal on the lithium-ion battery indicates that the costs to recycle the battery at the end of its useful life have already been paid by SharkNinja. In some areas, it is illegal to place spent lithium-ion batteries in the trash or municipal solid waste stream and the RBRC program provides an environmentally conscious alternative. RBRC, in cooperation with SharkNinja and other battery users, has established programs in the United States and Canada to facilitate the collection of spent lithium ion batteries. Help protect our environment and conserve natural resources by returning the spent lithium-ion battery to an authorized SharkNinja service center or to your local retailer for recycling. You may also contact your local recycling center for information on where to drop off the spent battery or call 1-800-798-7398.

PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
This Owner’s Guide is designed to help you get a complete understanding of your new Shark® vacuum.
SharkNinja Operating LLC
US: Needham, MA 02494
CAN: Ville St-Laurent, QC H4S 1A7
1-800-798-7398 sharkclean.com

Illustrations may differ from actual products. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change without notice.
For SharkNinja U.S. Patent information, visit sharkninja.com/uspatents

© 2020 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC. WANDVAC is a trademark of SharkNinja Operating LLC.
RBRC is a trademark of Rechargeable Battery Recycling Corporation.
WS630_WS620_WS631_WS632_IB_E_EB2_Mv9
PRINTED IN CHINA