STAYCOLD MONACO 900H Back Bar Coolers Instruction Manual

STAYCOLD MONACO 900H Back Bar Coolers

Product Information

Thank you for choosing this Rhino appliance. You must read these instructions carefully and keep the booklet in a safe place for your future reference. The booklet contains mandatory safety information as well as essential maintenance routines. Failure to observe the instructions is unsafe and will also invalidate the guarantee.

Specifications

• Models: COLD 600H, COLD 900H, COLD 900S, COLD 1350H, COLD 1350S, MILAN 600H, MONACO 900H, MONACO 900S, OSLO 1350H, OSLO 1350S
• Appliance Type: Back Bar Coolers

Safety and Installation

Safety Information
Please observe the following safety precautions and instructions at all times:

• All electrical work must be carried out by competent and skilled persons.
• Never use adaptors or multi-block extension leads to connect the appliance to the mains power.
• If the mains power supply cord is damaged, it must be replaced by the appliance manufacturer to avoid a hazard.
• Do not use any electrical appliances inside the refrigerated compartment of this appliance.
• Do not use any mechanical devices or other means to accelerate the defrosting process. Defrosting is performed automatically by the electronic controller and needs no user intervention.
• Do not damage the refrigeration circuit. If you do so, then open a window or door to ventilate the area and contact a professional for repair.
• The cabinet should be serviced and, at end-of-life, recycled by a professional organization and skilled persons.
• Consult your Local Authority or contact Rhino for more information.
• The appliance uses LED lighting. The lighting strips and transformer should only be replaced by a skilled person.

Unpacking and Positioning (before connecting to the power supply)
During all operations, please be careful not to jolt, jar, bump, or thump the cabinet. Handle it gently and with care. The refrigeration pipework is delicate and will be damaged by rough handling. The appliance is heavy, so please carry out a risk assessment prior to beginning this operation. Please cut the banding straps taking the necessary precautions to avoid hurting yourself or others. Remove all of the packaging and ensure that it is recycled properly.

Maintenance
Lighting
To maintain the lighting in the appliance, follow these steps:

1. Switch off the appliance and unplug it from the power supply.
2. Remove any items from the cabinet.
3. Clean the lighting strips using a soft cloth and mild detergent if necessary.
4. Check for any loose connections or damaged wiring. If found, contact a skilled person for repair.
5. Plug the appliance back into the power supply and switch it on.

Cleaning the Interior and Exterior
To clean the interior and exterior of the appliance, follow these steps:

1. Switch off the appliance and unplug it from the power supply.
2. Remove any items from the cabinet.
3. Wipe down the interior and exterior surfaces with a soft cloth and mild detergent.
4. Rinse the cloth and wipe away any soapy residue.
5. Dry the surfaces with a clean, dry cloth.
6. Plug the appliance back into the power supply and switch it on.

Cleaning the Condenser
To clean the condenser, follow these steps:

1. Switch off the appliance and unplug it from the power supply.
2. Locate the condenser, usually located at the back or underneath the appliance.
3. Use a soft brush or vacuum cleaner to remove any dust or debris from the condenser fins.
4. Make sure not to damage the fins during cleaning.
5. Plug the appliance back into the power supply and switch it on.

In the Event of a Malfunction
If you experience a malfunction with the appliance, please refer to the troubleshooting section of the user manual or contact Rhino for assistance.

Disposal at End-of-Life
When the appliance reaches its end of life, it should be recycled by a professional organization and skilled persons. Consult your Local Authority or contact Rhino for more information on proper disposal methods.

Contacts
If you have any questions or need further assistance, please contact Rhino using the provided contact information in the user manual.

FAQ

• Q: Can I use electrical appliances inside the refrigerated compartment?
  A: No, it is not recommended to use any electrical appliances inside the refrigerated compartment of this appliance.

• Q: Can I accelerate the defrosting process?
  A: No, defrosting is performed automatically by the electronic controller and needs no user intervention. Do not use any mechanical devices or other means to accelerate the defrosting process.

• Q: How should I clean the lighting strips?
  A: To clean the lighting strips, switch off the appliance, unplug it from the power supply, remove any items from the cabinet, and wipe down the lighting strips using a soft cloth and mild detergent if necessary.

• Q: How often should I clean the condenser?
  A: It is recommended to clean the condenser at least once every six months. Switch off the appliance, unplug it from the power supply, locate the condenser, use a soft brush or vacuum cleaner to remove any dust or debris from the condenser fins, and make sure not to damage the fins during cleaning.

Thank you for choosing this Rhino appliance. You must read these instructions carefully and keep the booklet in a safe place for your future reference. The booklet contains mandatory safety information as well as essential maintenance routines. Failure to observe the instructions is unsafe and will also invalidate the guarantee.

WARNING!
Any refrigeration repair or any electrical work must only be carried out by suitably qualified and competent persons.

The information within this booklet was correct at the time of printing.
Specifications and information may alter without notice.

SAFETY AND INSTALLATION

Safety Information

WARNING!
All electrical work must be carried out by suitably qualified persons

Warning! Please observe the following safety precautions and instructions at all times:

• This appliance is for indoor use only.

• Do not use this appliance other than for its intended use as a beverage display cooler. Always disconnect the mains power supply before removing any covers, performing maintenance work, cleaning or making any repairs.

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• Do not cover the front grille or rear air vents and please observe the installation and setup instructions described later in this manual. Adequate ventilation must be ensured for the appliance. Keep clear of obstructions all ventilation openings in the appliance enclosure.

• Do not probe any openings in the cabinet and be careful not to touch any moving parts such as the fans, or hot surfaces such as the compressor, or rear pipework; or cold surfaces such as the interior surfaces or the evaporator plate.

• Any electrical work on the cabinet should only be carried out by suitably qualified, competent, and skilled persons.

• Do not overload the power supply. Always ensure that the power supply is sufficient for the electrical requirements specified on the rating label. The rating label is located inside the cabinet on the side wall. If in doubt, please consult a qualified electrician.
  Important: Never use adaptors or multi-block extensions to connect the appliance to the main power.

• If the mains power supply cord is damaged, it must be replaced by the appliance manufacturer, its service agent, or suitably qualified, competent, and skilled persons to avoid a hazard. A skilled person is somebody who possesses the appropriate technical training, experience, and valid certifications necessary to be aware of the hazards to which he or she may be exposed and of the measures necessary to minimize the dangers to themselves and other persons. A competent person is defined as someone who has acquired the knowledge and skills to carry out the task, through training, qualification, or experience. They must also have had the appropriate training or practical experience (or both) in the subject sufficient to provide safe and satisfactory performance.

• Do not store explosive substances such as aerosol cans with a flammable propellant inside this appliance.

• Do not use any electrical appliances inside the refrigerated compartment of this appliance.

• Do not use any mechanical devices or other means to accelerate the defrosting process.
  Defrosting is performed automatically by the electronic controller and needs no user intervention.

• Do not damage the refrigeration circuit. If you do so, then open a window or door immediately to ventilate the area. The refrigerant is flammable.

• This appliance contains flammable refrigerant within its sealed system and also within the insulation foam. As such it is mandatory that the cabinet is serviced and, at end-of-life, recycled by a professional organization and skilled persons who have the necessary qualifications, certifications, and expertise to do so. If in doubt please consult your Local Authority or contact Rhino.

• The appliance uses LED lighting. The lighting strips and transformer should only be replaced using genuine Rhino parts of the same technical specification.

• During all operations, please be careful not to jolt, jar, bump or thump the cabinet.
  Handle it gently and with care. The refrigeration pipework is delicate and will be damaged by rough handling.

• Do not exceed the maximum shelf loading weight of 25 kg per shelf to avoid injury or damage.

• Never move or tilt the appliance whilst the power switch is in the “ON” position.

• The appliance must always be earthed.

• The appliance must only be charged with R600a refrigerant from an authorized supplier.
  To use another type of refrigerant would be dangerous and is not permitted under any circumstances.

• Electrical equipment should not be placed under the unit or where refrigerant could gather in the event of a leak.

• If it is necessary to repair the refrigeration such that it needs to be opened or charged, then it will be necessary for the technician to possess a Gas Work authorization (hydrocarbon refrigerants). Queensland, Australia has particular regulations for such activities.

• The electrical wiring diagram is to be found on the appliance itself and is located inside the cabinet on the side wall.

Unpacking and positioning (before connecting to the power supply)

• During all operations, please be careful not to jolt, jar, bump or thump the cabinet.
  Handle it gently and with care. The refrigeration pipework is delicate and will be damaged by rough handling.

• The appliance is heavy and therefore please carry out a risk assessment before beginning this operation.

• Please cut the banding straps taking the necessary precautions to avoid hurting yourself or others. Remove all of the packaging and ensure that it is recycled by all local laws and regulations. Safety Note: Please pay special attention to the hazard represented by the plastic bag so that it may not be taken by children.

• Please take care not to pinch or damage the power cord in any way. Please examine the power cord for any splits, cuts or damage.

• The shelves may be adjusted by moving the clips as illustrated in Figure 1 below:

• Warning: Do not exceed the maximum shelf loading weight of 25 kgs per shelf to avoid injury or damage. Please ensure that the shelf support clips are securely located in the support strip for safe operations. The shelves may be adjusted by squeezing together the relevant support clips and re-locating in a new position.
  Please ensure the clips are fully inserted and securely located before loading the shelves. The clips should be mounted in such a way that the shelf is level. Failure to do so could result in the shelf falling out of position and would be dangerous.

• This appliance is designed for a maximum of Climate Class 4. Please refer to the rating plate. Climate Class 4 is defined as a maximum environmental condition of 30C ambient temperature and 55% relative humidity.

• Do not place it next to a source of heat or humidity such as a glass or dishwasher, heater outlet, oven, or any other potential heat or humidity-emitting appliance or structure.

• Do not place the appliance in direct sunlight.

• Do not place it near a source of static electricity or where it is vulnerable to lightning strikes.

• The room must be well-ventilated and free from sources of ignition. It must not be located in a position where refrigerant could gather in the event of a leak. If it is below ground level then extra precautions may be necessary and an expert should be consulted.
  In Australia and New Zealand, the provisions of AS1677:2 1998 and subsequent amendments must be adhered to.

• Please make sure the floor is level and even. If the cabinet is not level, hazards and malfunctions may occur including, but not limited to, the condensate water not draining away and the doors not functioning correctly. You may adjust the appliance using the leveling feet, being careful not to pinch your fingers.

• The appliance requires a minimum ventilation space at the sides top and rear of 20mm.
  The front grille must be completely unobstructed. See Figure 2.

Connecting the cooler to the Power Supply

• Please observe all of the warnings and procedures stated in section 1.1.
• Please take care not to pinch or damage the power cord in any way. Please examine the power cord for any splits, cuts, or damage. If it is unsatisfactory then it must be replaced according to the instructions stated in 1.1.
• Plug in the cooler and turn on the power.
• Switch on the appliance using the red power switch on the front control panel.

OPERATION

Operation of the Appliance

• The appliance is designed to run automatically. Defrosting is automatic. The condensed water is evaporated automatically by the system.
• Maintenance must be performed according to the procedures detailed in section 3 of these instructions.

Adjustment of the temperature

• The electronic controller has been factory set to chill the beverages to approximately 2 Centigrade. Should you wish to alter the set point, please adopt the following procedure;

• Step 1: Press and hold the “SET” button for approximately 4 seconds until the display flashes “F1”
• Step 2: Press the set button quickly once more and the current set point temperature will be displayed.
• Step 3: Press the up or down arrow buttons to adjust the setting temperature.
• Step 4: Press and hold the SET button for approximately 4 seconds and your new selection will be stored. If you fail to press SET, the controller will time out and revert to the previously stored setting.

WARNING!
Please do not alter the value shown at F2. It must remain at 4 for the cooler to function correctly. This value represents the difference between the compressor switch on and off temperatures and should not be tampered with. To do so would invalidate the guarantee.

MAINTENANCE

Please observe all of the safety warnings, precautions, and instructions set out in Section 1.

Lighting

• The appliance uses LED lighting strips powered by a low-voltage transformer. If replacement is required, please order genuine replacement parts from Rhino.
  Replacement is a job for an appropriately qualified, skilled, and competent person.

Cleaning the interior and exterior

• The interior walls and shelves should be cleaned and sanitized regularly to ensure hygiene regulations are met. Please do not use splashing, dripping, jetting or running water. Do not use steam. Only a damp cloth should be used in conjunction with appropriate cleaning materials for the task at hand. Always follow the instructions specific to the cleaning materials being used.

Cleaning the Condenser

• The condenser is located at the rear of the appliance behind the compressor compartment cover. The function of the condenser is to dissipate the heat that has been extracted from the interior of the cabinet. For it to work efficiently (or at all), it must be kept clean and free of dust at all times.
• This appliance has a low-maintenance condenser that is less prone to blockage than other types. However, it is still recommended to check that it is clean and dust-free at least every three months.

Please adopt the following procedure or go to www.cleanme.eu for a demonstration:

• Step 1: Empty the appliance. Switch it off using the red power switch. Pull it out from its enclosure. Unplug from the mains power supply.

• Step 2: Looking at the back of the appliance, remove the screws from the rear compartment cover.

• Step 3: Locate the condenser and examine it for dust or debris.

• Step 4: Clean the condenser using the nozzle of a vacuum cleaner or a soft brush.
  Dust that is removed must be cleared away. The condenser is a delicate component and must be treated with great care and respect. Be careful of the fan blades and be sure not to bend or deflect them in any way. NEVER use water in this area.
  Note: If the condenser has been contaminated with grease or fat, then a skilled and competent refrigeration specialist will be required to do the cleaning. Do not use the cabinet or plug it back in until the cleaning has been done professionally by a skilled person. A fire hazard may be present.

• Step 5: Replace the cover and screws and plug them back into the main power supply.

IN THE EVENT OF A MALFUNCTION

• In the event of a malfunction, please be sure only to use a suitably qualified, competent and skilled refrigeration service engineer and insist upon genuine Rhino parts. If the appliance is under guarantee, please call the company from whom you purchased the appliance. Always have the serial number on hand. The serial number is located on the inside wall of the refrigerated compartment. It is often accompanied by, or located next to, a bar code.

DISPOSAL AT END-OF-LIFE

• This appliance contains flammable refrigerant within its sealed system and also within the insulation foam. It must be recycled by a professional, competent, authorized, and regulated organization with expertise in the
  handling of refrigeration appliances. For further information, please consult your local Authority.

CONTACTS

• For further information or to obtain Genuine Spare Parts, please contact:

Staycold Export Ltd.
9 Hunters Walk
Canal Street
Chester
CH1 4EB
United Kingdom
Telephone from within the UK:
Telephone from overseas:
01244 321320
+44 1244 321320
www.staycold.co.uk

References

• Manual-Hub.com - Free PDF manuals!
• Maintenance Advice
• Staycold Export Ltd

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>