WICKED AUDIO WI-BT265X-CA Bandido Wireless Earbuds User Manual

: June 16, 2024
: WICKED AUDIO

Table of Contents

WICKED AUDIO WI-BT265X-CA Bandido Wireless Earbuds
Product Usage Instructions
FAQ
PRODUCT OVERVIEW
Important Safety Instruction
FIRST TIME USE
FUNCTIONS
PRECAUTIONS
LIMITED ONE YEAR WARRANTY
SPECS
BLUETOOTH
TROUBLESHOOTING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WICKED AUDIO WI-BT265X-CA Bandido Wireless Earbuds

Product Specifications

Model: WI-BT265X-CA
FCC ID: 2AFM7WI-BT265X
IC: 20526-WIBT265X

Product Usage Instructions

Charging and Pairing

Make sure the headset is charged.
Turn on your phone.
Select “Wicked Bandido” to pair.
Once successfully paired, proceed to the next step.

Functions

PRESS: Perform a single press on the button.
PRESSES: Perform two quick presses on the button.
REDIAL: Press the button once to redial the last number dialed.
NEXT TRACK: Press the button once to skip to the next track.
LONG PRESS: Press and hold the button for an extended period of time.
VOLUME UP: Press the volume up button to increase the volume.
VOLUME DOWN: Press the volume down button to decrease the volume.
MICROPHONE: Use the built-in microphone for phone calls.

Troubleshooting

If you encounter any issues with the product, try the following:

Power off your phone, wait for a few minutes, and power it on again.
If your Bluetooth device is unable to search for, locate, or pair with the Wicked Audio Bluetooth product, ensure that the product is in pairing mode and try again.
If your Bluetooth device gets disconnected after successfully connecting/pairing with the Wicked Audio product, try reconnecting.
If you are unable to connect/pair your desired Bluetooth device with the Wicked Audio product after connecting it with multiple Bluetooth devices, ensure that the previous connections are disconnected before trying again.
If there is no sound when using the microphone on the Wicked Audio product during phone calls, check if the micro USB cable is securely connected to your Bluetooth device.

FAQ

Q: Can listening to audio at excessive volumes cause hearing damage?

A: Yes, overexposure to excessive sound levels can damage your ears and result in permanent noise-induced hearing loss (NIHL). Please use the product at as low a volume as possible to prevent hearing damage.

Q: What are the maximum time exposure guidelines for sound pressure levels?

A: The guidelines established by the Occupational Safety Health Administration (OSHA) are as follows:

90 dB SPL at 8 hours
95 dB SPL at 4 hours
100 dB SPL at 2 hours
105 dB SPL at 1 hour
110 dB SPL at 30 minutes
115 dB SPL at 15 minutes
120 dB SPL: Avoid as damage may occur

Q: What is the warranty period for this product?

A: The product comes with a limited one-year warranty. Keep your receipt to obtain warranty service.

Q: Where was this product developed and manufactured?

A: The product was developed in Utah, U.S.A. and made in China.

Q: Where can I find more details about the warranty?

A: For more details about the warranty, visit www.wickedaudio.com.

Q: How can I contact Curve Distribution Services for support?

A: You can contact Curve Distribution Services at the following address: 120 11056 48TH ST SE Calgary, AB T2C 3E1

PRODUCT OVERVIEW

Important Safety Instruction

Read these instructions.
Keep these instructions.
Heed all warnings
Follow all instructions.

Attention should be drawn to the environmental aspects of battery disposal;
The use of apparatus in moderate climates

FIRST TIME USE

1

| Make sure that the headset is charged, your phone turned on, with the Bluetooth feature enabled.

__

---|---
2| Turn on the Wicked Bandido and the LED will flash red and blue.

.

3| Your mobile phone should detect “Wicked Bandido”

__

4

| Select “Wicked Bandido” to pair and once succesfully paired, the LED will slowly flash blue.

__

FUNCTIONS

| 1 PRESS

__

| PLAY/PAUSE/ANSWER CALL/HANG UP

__

---|---|---
| 2 PRESSES

__

| REDIAL

__

| 1 PRESS

__

| NEXT TRACK

__

| 1 PRESS

__

| PREVIOUS TRACK

__

| LONG PRESS

__

| VOLUME UP

__

| LONG PRESS| VOLUME DOWN

__

PRECAUTIONS

LISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE. USE AS LOW A VOLUME AS POSSIBLE.
Over exposure to excessive sound levels can damage your ears resulting in permanent noise-induced hearing loss (NIHL). Please use the following guidelines established by the Occupational Safety Health Administration (OSHA) on maximum time exposure to sound pressure levels before hearing damage occurs.

SAFE USE & HAZARD WARNINGS
90 dB SPL at 8 hours, 95 dB SPL at 4 hours, 100 dB SPL at 2 hours, 105 dB SPL at 1 hours, 110 dB SPL at 30 min, 115 dB SPL at 15 min, 120 dB SPL: Avoid as damage may occur

LIMITED ONE YEAR WARRANTY

Keep your receipt to obtain warranty service.
Go to www.wickedaudio.com for more details.

Developed in Utah, U.S.A.
Made in China

SPECS

DRIVER: 10 mm Neodymium /Néodyme 10 mm
SENSITIVITY: 100 dB
FREQUENCY: 20-20,000 Hz
IMPEDANCE: 16 Ohms

BLUETOOTH

VERSION 4.2
RANGE: 32 Feet/10 Meters
BATTERY LIFE: 5+ Hours/5+ Heures
CHARGE TIME: 1.5 Hour/ 1.5 Heures

IC: 20526-WIBT265X

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Model #: WI-BT265X-CA
FCC ID: 2AFM7WI-BT265X
IC: 20526-WIBT265X

TROUBLESHOOTING

Product does not turn on:
- 1a – Hold down power button for 3-5 seconds until LED turns on
- 1b – Make sure battery is charged. Charge battery for at least 30 minutes and power on again
Your Bluetooth device is unable to search for/locate/pair with Wicked Audio Bluetooth product:
- 2a – Be sure your Bluetooth device has Bluetooth capabilities turned on/activated
- 2b – Be sure your Wicked Audio product is in pairing mode (LED will be Flashing Red AND Blue)
- 2c – Delete/Forget/Unpair the Wicked Audio product from your Bluetooth list on your device or other nearby devices and search again
- 2d – If still unable to search for/locate/pair with Wicked Audio Bluetooth product, please restart your Bluetooth device and the Wicked Audio product and search again
Disconnected after your Bluetooth device successfully connected/paired with your Wicked Audio product:
- 3a – The Bluetooth signal has been blocked with an obstruction/exceeded Bluetooth range between your Bluetooth device and the Wicked Audio product
- 3b – Check to see if the battery is at low power, charge if needed
Unable to connect/pair your desired Bluetooth device with your Wicked Audio product after connecting your Wicked Audio product with multiple Bluetooth devices:
- 4a – Your Wicked Audio product will attempt to connect/pair with last Bluetooth device it paired with
- 4b – Turn off Bluetooth capabilities on other Bluetooth devices in your vicinity that were recently paired to your Wicked Audio product. This will allow your desired Bluetooth product to connect with your Wicked Audio product.
- 4c – If still unable to pair with Wicked Audio Bluetooth product, please restart your Bluetooth device and the Wicked Audio product and search again.
No sound when talking with someone on the phone using mic on Wicked Audio product
5a – Make sure the Wicked Audio product is successfully paired with your Bluetooth device
5b – Increase the volume of your Bluetooth device and/or Wicked Audio product
No sound when playing music
6a – Increase the volume of your Bluetooth device and/or Wicked Audio product
6b – Make sure the Wicked Audio is successfully paired with your Bluetooth device
Unable to charge
- 7a – Wicked Audio product will have a solid Red LED when charging and the LED will turn off when fully charged.
- 7b – Make sure the USB cable is connecting well with charger and the micro USB cable is connecting well with your Bluetooth device.