MOTOROLA SCOUT1-B Wi-Fi Video Pet Monitor Camera User Guide

**MOTOROLA SCOUT1-B Wi-Fi Video Pet Monitor Camera User Guide

**

INSTALLATION INSTRUCTION

Welcome… to your new Motorola Video Pet Monitor Camera!
Thank you for purchasing the Wi-Fi® Video Pet Monitor Camera. You can set up the camera from your iPhone® /iPad® or devices for Android™ and you can then view the camera video from your PC, Notebook, devices for Android™ or iPhone® /iPad® .
Please keep your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.

For product related questions, please call:
US and Canada 1-888-331-3383
This User’s Guide has all the information you need to get the most out of your product. Please read the Safety Instructions on page 5 – 6 before you install the unit.

I nside the Box

• 1 x Wi-Fi® Video Pet Monitor Camera
• 1 x Power Adapter

Overview of your Camera

1. Photo Sensor (for night mode detection)
2. Infrared LEDs (for night vision)
3. Camera Lens
4. Power/Status LED
5. Microphone6Speaker
6. ON/OFF Switch
7. Antenna
8. Temperature Sensor
9. Power Adapter Connector
10. Reset Button

Important guidelines for installing your Wi-Fi® Video Pet Monitor Camera

• Use of other 2.4GHz products, such as other wireless networks, Bluetooth® systems or microwave ovens may cause interference with this product. Keep the Wi-Fi® Video Pet Monitor Camera away from these types of products, or turn them off if they appear to be causing interference.
• Always ensure that you have a good Wi-Fi® connection available.

Safety Instructions

WARNING :
STRANGULATION HAZARD – In case this unit is being used to monitor infants or children, keep the unit and adapter cord more than 3 feet from the crib and out of their reach. Never place camera or cords within a crib or near a bed. Secure the cord away from children’s reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided.
As with any electrical device, supervision of your pet’s usage should be exercised until your pet is acclimated to the product. If your pet is prone to chewing, we strongly recommend you keep this and all other electrical devices out of its reach.

Wi-Fi® Video Pet Monitor Camera SET UP & USE:

• Determine a location for the Wi-Fi® Video Pet Camera Unit that will provide the best view of your pets.
• Place the Wi-Fi® Video Pet Camera Unit on a flat surface, such as a dresser, shelf, or wall-mount using the keyhole slot in the base.
• NEVER place the Wi-Fi® Video Pet Camera Unit or cords within the vicinity of your pets.
• Secure the cord to the wall to keep cord away from pets or children.

WARNING
This Wi-Fi® Video Pet Monitor Camera is compliant with all relevant electromagnetic field standards and is, when handled as described in the User’s Guide, safe to use. Therefore, always read the instructions in this User’s Guide carefully before using the device.

• Adult assembly is required. Keep small parts away from pets and children when assembling.
• This product is not a toy. Do not allow pets or children to play with it.
• This Wi-Fi® Video Pet Monitor Camera is not a substitute for responsible adult supervision.
• Keep this user’s guide for future reference.
• Do not cover the Wi-Fi® Video Pet Monitor Camera with a towel or blanket.
• Test the Wi-Fi® Video Pet Monitor Camera and all its functions so that you are familiar with it prior to use.
• Do not use the Wi-Fi® Video Pet Monitor Camera near water.
• Do not install the Wi-Fi® Video Pet Monitor Camera near a heat source.
• Only use the power adapter provided. Do not use other power adapters as this may damage the device.
• Do not touch the plug contacts with sharp or metal objects.

System Requirements

Web Portal

• Windows® system XP SP3 or above
• Mac OS® version 10.7 or above
• Internet Explorer® version 8.0 or above
• Firefox® version 11.0 or above
• Chrome™ version 18.0 or above
• Safari® version 5.1 or above
• Java™ version 7 or above Android™ System
• Version 2.3.6 or above iPhone® /iPad® iOS
• Version 4.3 or above

Getting started – Connecting Devices

How does it work?

• The Monitor Everywhere Server keeps track of the cameras.
• When a user wants to access the camera, the server authenticates the user and permits the user access to the camera.

Setup
Connect the Camera to the power adapter and plug it into a power socket. Wait until the camera LED changes to fast blinking, meaning the camera is in reset/setup state and is ready for “Camera Setup’ registration. The Camera must be within range of the Wi-Fi® router.
Status of LED Indication:

• Reset / Setup state: fast blinking
• Unconnect state: slow blinking
• Connect state: always on

User Account and Camera Setup: Working with devices for Android™

• Download and install the application “Monitor Everywhere” from the Google Play™ Store. Note: If you can’t find the application, use your device browser to go to www.monitoreverywhere.com for advice on how to install.

• Turn on the Wi-Fi® of your device for Android™ and select your wireless network.

• Switch on the camera (see 5. Procedure for resetting the Camera).

• Run the “Monitor Everywhere” application. After initialization, the Monitor Setup wizard appears

• Select CREATE ACCOUNT.
  

• Select GET STARTED.

• Follow the on-screen instructions and select the camera and the Wi-Fi® connection that your camera will use. If necessary enter a password.

• Tap CONNECT TO Wi-Fi.

• Tap NEXT STEP
  

• Select CREATE ACCOUNT.

• Enter a user name, a password, an e-mail address and select SIGN UP.

• Agree with the terms of use and select I AGREE.

• Tap NEXT STEP.
  

• Follow the on screen checklist to ensure that your camera is power connected and tap NEXT.

• Select the camera from the list.

If you cannot find the camera ID on the list, please reset the camera with the following procedure:

1. Switch the ON/OFF switch to ON.
2. Press and hold the RESET button on the underside of the camera for 5 seconds, until you hear a beep sound.
3. Release the RESET button and wait for the camera to complete the internal reset procedure.
4. After about 60 seconds you will hear two short beeps and the green LED will start blinking.

• Wait for up to five minutes. If the connection process takes longer, tap CANCEL and try again.
• Ensure that you have a good Wi-Fi network connection.
• Once your camera is installed, you can rename it.
• Tap DONE.
• Tap START MONITOR to show the camera view.
• Tap VIEW to show the camera view and the controls
  

Note :
The Camera SSID is printed on the label on the bottom of the Camera, for example: ID: Camera-1006fa On your devices for Android™ you will see: Camera- 1006fa.

User Account and Camera Setup: Working with iPhone® /iPad®

• Install the application “Monitor Everywhere” from the App StoreSM. Note: If you can’t find the application, use your device browser to go to www.monitoreverywhere.com for advice on how to install.

• Run the “Monitor Everywhere” application and follow the screen number sequence:
  
  

• Select Setup Monitor Everywhere (pictures S1, 2)

• Tap Continue (picture S3).

• Enter a user name, a password and an e-mail address (picture S4).

• Tap Done

• Tap ‘Setup Monitor’ (picture S5)

• Switch on the camera (see 5. Procedure for resetting the Camera) and follow the on-screen instructions.

• Tap Continue (picture S6).

• On your iPhone® or iPad® , under Settings select Wi-Fi, then select the camera from the network list and wait until it is connected (pictures S7, 8).

• Run the “Monitor Everywhere’ app again.
  Note : The Camera SSID is printed on the label on the bottom of the Camera, for example: ID: Camera-1006fa. On your iPhone® /iPad® , you will see: Camera-1006fa.

• Tap Configure Camera to Wi-Fi (pictures S9,10).

• Enter ‘Wi-Fi’ password for camera (picture S11), then press Next

• On your iPhone® or iPad® , under Settings select Wi-Fi. Select your preferred Wi-Fi connection from the network list and wait until it is connected (pictures S12, 13, 14).

• Tap Start monitor (picture S15).

• Tap on the Camera icon to start viewing (picture S16).

Camera

Connecting the Camera to Power

• Insert the small end of the Power Adapter into the Power Adapter Connector then plug the Power Adapter into a suitable power socket.
• Slide the ON/OFF switch to ON, the green Power LED will light up. (Note: To switch the device off, slide the ON/OFF switch to OFF.)

Camera Functions

Working with PC/Notebook

• Go to URL: https://www.monitoreverywhere.com.
• Enter the User Name and Password and then tap LOGIN, if you have already created an account.
• Select the camera and tap VIEW to see the camera view and control buttons.
• Tap on the icons for different functions:

Play Song:

Tap the icon to show the Play Song menu.
Select one of the five songs to play the song.
Tap Music OFF to stop playing.

Speaker:

Tap the icon to turn audio monitoring ON or OFF.

Photo/Video:

Take a picture or record a video and select the space where it should be saved on your computer.

Camera Settings:
Under Display, adjust the Video Quality.
Move the sliders from left (-) to right (+) to adjust Contrast, Brightness, and Volume.

Pan and Tilt Function :

Tap the up and down buttons to tilt and the left and right buttons to pan.

Temperature:

The current room temperature will always be displayed.

• Tap LOGOUT to leave the account.

Vewing another Camera:
Working with PC/Notebook

• Tap VIEW OTHER CAMERA to view the camera list and then pick your choice.

Camera Functions

Working with devices for Android™

• Run the “Monitor Everywhere” application.

• Enter the User Name and Password and then tap Login, if you have already created an Account (see 3.2 Getting Started/ Connecting Devices User Account and Camera Setup).

• Tap to change the camera name or remove a camera from the list. Tap the return button to return to the camera list.

• Select the camera and tap View to see the camera view.
  Tap the display to reveal the camera control icons.

• Tap on the icons for different functions:

Camera Settings:

Change Name, Adjust Camera Volume, Adjust Camera Brightness, Adjust Sound Sensitivity (Level 1(Low): a loud noise is required. Level 4 (High): a low noise will trigger the notification sent to devices for Android™), Change Temperature Unit, Adjust Video Quality, Remove Camera, Show Information.

Notifications:
Turn ON/OFF the notification function for Sound and Temperature Alert.

Pet Song:
Tap the icon to show the Pet Song menu. Turn music ON and select one of the five songs. Turn music OFF to stop playing.

Microphone:
Tap the icon to turn on the talk back function to the camera.
Press and hold the oval microphone icon to speak, and release it to stop.

**

Speaker:
Turn audio monitoring ON or OFF.**

Photo/Video:
Take a photo or record a video. Tap the icon to start the camera function.
Tap the photo icon to activate the camera function.
Tap the video icon to activate the video function. Tap the red dot to start, and the square to stop recording. Photos and videos will be stored in the internal flash memory of your device for Android™ and can be accessed from your Gallery or Media Player. To play videos, please use the “Monitor Everywhere” application or a 3rd party application, such as MX player (i.e. Google Play™ Store), which is able to play MJPG (Motion-jpeg).

Zoom Function:
Slide the zoom from – to + to enlarge the view and vice versa.

Pan and Tilt Function:
Press the up and down button to tilt and the left and right button to pan.

Temperature:
The display will always show the current room temperature.

Video Quality:
Press once to toggle between QVGA (low resolution, gray HQ color) and VGA (high resolution, white HQ color).

• Press the Menu button of your device for Android™ and select Logout to leave the account.

Adding another Camera:
Working with devices for Android™

• To add another camera, please follow the screen number sequence:

Tap Next (picture A1).

• Select your camera (picture A3) and then select your preferred Wi-Fi® network (picture A4).

• If requested, enter your network password (picture A5).

• Please be patient, it may take a few minutes until your camera is added to your account (picture A6).

• Once the camera has been added, the camera view will be automatically displayed.

Note:
When you are accessing your camera via a network different from your home network (over the internet) or by mobile (such as devices for Android™ or iPhone® ), the following message may periodically pop up:
“This video has been viewed for approximately 5 minutes. Do you want to continue?”.
Press Yes to continue or No to stop viewing.

Camera Functions:
Working with iPhone® /iPad®

• Run the “Monitor Everywhere” application.
• If you have already created an account (see 3.3 Getting Started – Connecting Devices User Account and Camera Setup), enter your password, tap Return and then Done.
• Tap on the camera icon to show the camera view.
• Tap the display to reveal the camera control icons.
• Tap on the icons for different functions:

Camera Settings:
Change Camera Name, Adjust Camera Volume, Adjust Camera Brightness, Adjust Sound Sensitivity to trigger notification or Disable the monitor devices microphone to avoid notification, Change Temperature Unit, Set Video Quality, Remove this Camera, Show Information.

• Tap on Back to return to the camera control icons.

Pet Song:
Tap the icon to show the Pet Song menu. Turn music ON and select one of the five songs. Turn music OFF to stop playing.
Select Done or Cancel to return to the camera control icons.

Microphone:
Tap the icon to turn on the talk back function to the camera.
Tap and hold the oval microphone icon to speak, and release it to stop.

**

Camera Speaker:
Tap the icon to turn audio monitoring ON or OFF.**

Photo:
Tap the icon to start the camera function and take a photo. Under Settings on your iPhone® , select Privacy > Photos.
Turn Camera ON, allowing access to photos.

Zoom Function:
Slide the zoom from – to + to enlarge the view and vice versa.

Pan and Tilt Function:
Tap the up and down buttons to tilt and the left and right buttons to pan

Temperature:
The current room temperature is always displayed.

Video Quality:
Press once to toggle between QVGA (low resolution, grey HQ color) and VGA (high resolution, white HQ color).

Note: Video recording and playback are not supported on iOS devices.

Tap Cameras to return to the Camera list.
Tap on to add another camera to the list.

• Tap on Edit:

• Tap Remove to take a camera off the list.

• Tap Rename to give a camera a new name.

• Tap Alert Settings to receive notifications if a noise is detected or the temperature in environment is too high or too low.

• If you use Alert Settings, under Settings on your iPhone® / iPad® , select Notifications > Camera > Notification Center ON.

• Select your preferred Alert Style and return to the application and tap Done.

• Tap Cancel to return to the camera list.

• Tap on Account to change the password.

• Tap on Logout to leave the account.

Adding another Camera:
Working with iPhone® /iPad®
Follow the same steps as under 3.3 User Account and
Camera Setup, Working with iPhone® /iPad®.

Procedure for resetting the Camera

Note: If your camera is moved from one router (e.g. home) to another router (e.g. office) or you have camera setup issues, then this camera must be reset again, and then the camera set up again for devices for Android TM or iPhone® /iPad® .

1. Switch the ON/OFF switch to ON.
2. Press and hold the RESET button on the underside of the camera for 5 seconds, until you hear a beep sound.
3. Release the RESET button and wait for the camera to complete the internal reset procedure.
4. After about 60 seconds you will hear two short beeps and the green LED will start blinking.

• Please be patient, it may take a few minutes until your camera appears in your Wi-Fi® devices list, or is added to your account.

Help

Noise interference
To avoid background noise or echoes, ensure that there is enough distance between your device and the Wi-Fi® Camera Unit.
Use of other 2.4 GHz products, such as Bluetooth® systems or microwave ovens, may cause interference with this product.
Keep the Wi-Fi® Camera Unit at least 5ft away from these types of products, or turn them off if they appear to be causing interference.

Lost connection
Check your Wi-Fi settings. If necessary reconnect your Wi-Fi.
Ensure the Wi-Fi® Camera Unit is switched ON. Wait a few minutes to make the connection with the Wi-Fi system.

If you forgot your password
If you do not remember your password, tap Forgot password and submit your e-mail address. A new password will be sent to your e-mail address.

name and password.
Account| I receive an error message saying: “Email ID or Email address”.| Please ensure that you have registered with us. Tap Create Account to create an account to be able to use the Wi-Fi®Monitor Unit.
Account| What do I do if I forgot my password?| Click on the “Forgot Password” link on the www.monitoreverywhere.com website OR your Android™ or iOS application. We will send a new password to your registered email address.
Account| I am unable to receive a new password although I have used the “Forgot password” option.|

1. The e-mail might have been sent to your Junk Mail Folder. Please check your Junk Mail Folder.
2. There might be a delay in getting your e-mail. Please wait and try your email in box again.

Connectivity Issues| I received a message: “We are having problems accessing your camera. This could be because of a lack of internet connection. Please try again.”|

1. Please try again in a few minutes. This could be because of any issue with your internet connection.
2. If the problem remains, please restart your camera to check if this fixes the problem.
3. Please reset/restart yourWireless Router.

Viewing Camera| When I am in “remote mode”, the video stops after 5 minutes. How do I view for a longer period of time?| When you are accessing your camera via a network different from your home network (over the internet) your video times out after 5 minutes.You can click on the Camera again from the Android™/iOS application to start streaming again.If you are accessing from a web browser, press on the Reload button to start viewing yourcamera video stream.
Connectivity Issues| My phone application displays the following message:“Unable to connect to the internet BMS server”.|

1. Check the Wi-Fi network strength.
2. Check if you are connected to internet by starting the phone browser and going to a website(e.g. www.google.com)
3. Try again if you were successful in connecting to the internet.

Setting Up| While I am adding a new camera to my account, I am not able to find any cameras to add.| If you are trying to add a camera which has previously been added into your account / another account, you will first have to reset the camera. This can be done by pressing and holding the RESET button at the bottom of the camera for 5 seconds.
General| What are the supported browsers for accessing from my PC/Mac®?| On PC or Mac®, we recommend using Google Chrome. However the following browsers are also supported:PC: Internet Explorer 8 andabove. Mac®: Safari.
Connectivity Issues| I am having problems accessing the camera from my remote PC and/or my 3G phone.| Please check your home Wi-Fi router settings and enable UPNP on your router for better performance to stream to a remote device.If you have multiple Wi-Fi routers at your home, please configure your camera to connect to the router which has the Broadband / line connection.
General| What is the significance of the LED blinking?| A blinking LED indicates the following status:Fast blinking: Your camera is in setup mode. You can add the camera to your account in this mode. Out of the box, the camera is in setup mode. To reset to setup mode, press and hold the RESET button on the bottom of the camera until you hear a long beep.Slow blinking: The camera is either connecting to the router or lost the link to the router. Please ensure that the camera is in the Wi-Fi signal range.LED is stable: The camera is connected to the Wi-Fi network.
Connectivity Issues| I am not able to access my camera.| Please check if the camera is within Wi-Fi range. If the LED on your camera is slow blinking, please try to move the cameracloser to the router for better Wi-Fi range and try again.
Setting Up| During setup on device for Android™ and iOS, at the last step I am not able to find my camera and therefore the setup fails.| Please reset the camera to setup mode and try again. Press and hold the RESET button on the bottom of the camera until you hear a long beep. Wait a minute for the camera to restart.The camera LED is blinking fast, indicating that it is in setup mode. Now restart the setup from your Smartphone again.
Connectivity Issues| Even though I am accessing my camera from the same Wi-Fi network, I still findmy camera shown as remote or I can only access it for 5minutes at a time.| Please check your wireless router settings. In routers like Buffalo, there is an option called Wireless Isolation. Please disable this feature or other similar.
Camera| When I try to view the camera, I get a prompt for camera firmware upgrade. What should I do?| Please upgrade your firmware. This takes approximately 5 minutes. We push upgrades from time to time to improve the camera features.
APP| I am not able to find the iOS application in the App StoreSM.| This is a known issue for some users using iOS version 6.0.1. Please use the following link on your iPad browser to download the application:https://itunes.apple.com/us/ app/monitor-everywhere/ id577753318?mt=8&uo=4
General| Which platforms are supported for accessing my camera?| Windows® XP SP3 or above Mac iOS version 10.7 or above Internet Explorer® version 8.0 or aboveFirefox® version 11.0 or above Chrome™ version 18.0 or above Safari® version 5.1 or above Java™ version 7 or above Android™ version 2.3.6 or above iPhone®/iPad® iOS version 4.3or above
General| I do not hear the sound when I am accessing a remote camera.| You can tap on the speaker icon in the video stream screen to hear audio. By default the audio is not ON when you are accessing a remote camera.
General| What is the meaning of “Local Camera” and “Remote Camera”?| When you are accessing your camera from the same wireless network (Home) in which it is configured, it is a local camera. When you are accessing your camera away from your home it is a remote camera. You maybe using 3G or Wi-Fi connection outside of your home.
Features| What does the message“PAN TILT disabled because of networkspeed” mean?| When your network speed is low, the PAN and TILT is disabled.You can see the message on the application screen when thisoccurs.
General| I am having problems accessing my camera from Internet Explorer. What should I do?| The following links take you to the troubleshooting guide for Internet Explorer related issues. https://monitoreverywhere.com/ BMS/troubleshoot.jsp?nojavaiehttps://monitoreverywhere. com/BMS/troubleshoot. jsp?javadisabledie
General| I am having problems accessing my camera from Google Chrome™. What should I do?| The following links take you to the troubleshooting guide for Google Chrome™ related issues.https://monitoreverywhere.com/ BMS/troubleshoot.jsp?nojavachhttps://monitoreverywhere. com/BMS/troubleshoot. jsp?javadisabledch
General| I am having problems accessing my camera from Safari on Mac®. What should I do?| The following links take you to the troubleshooting guide for Safari on Mac®.https://monitoreverywhere. com/BMS/troubleshoot. jsp?javadisabledsfhttps://monitoreverywhere.com/ BMS/troubleshoot.jsp?nojavasf
General| I am not able to access my cameras on Internet Explorer®. I am using Internet Explorer® version 6OR version 7.| You need to be on Internet Explorer® version 8.0 or above. Please upgrade your browser. You can also use Google Chrome™ to access.
Setting Up| When I am using an iOS device to setup the camera for first time use, in the step where I try to connect to Camera-XXXXXX in the Wi-Fi settings, I get an error saying “Cannot connect to Camera-=XXXXXX”.| This is a known issue for some iOS users. Please try to connect again.
General| How do I find information on which version of APP I am running?| When you are viewing your camera, you can tap on the GEAR icon to go to the camera settings page. Select the Information option to view the APP and Camera versions.
General| How do I download the APP for Android and iOS devices?| Android:- Open Google Play APP on your Android device.- Select Search- Type “Monitor Everywhere”- The results will have Monitor Everywhere APP by Binatone- select to install itiOS Device:- Open iOS APP Store- Select search- Type “Monitor Everywhere”- The results will have Monitor Everywhere APP by Binatone- select to install it
Features| I am having problems with PAN/TILT. The camera seems to move much later after I have pressed on the PAN button| This is usually caused when you are using the PAN/TILT feature and the network bandwidth/ connectivity is not strong. This might occur when you are accessing your camera in Remote mode.To improve performance you can switch High Quality video mode (white HQ color) to Low Quality video mode (gray HQ color). You can select the HQ button whenyou are viewing your camera.
Features| How many users can access the camera at one time?|

1. If you are accessing in Local mode (your Smartphone/PC is connected to the same network as your camera), up to four users can view your camera at the same time. A remote user is not allowed. Remote users trying to access the same camera will get a ‘camera busy’ notification.
2. If you are accessing in Remote mode (from an outside network different from where you have yourcamera, e.g. 3G or your office network), only one remote user plus two local users are allowed to access the same camera. Note that when one user is accessing the camera from Remote mode, other users trying to access the same camera through remote networks, will get a ‘camera busy’ notification.

General Information

If your product is not working properly….

1. Read this User’s Guide.
2. Contact Customer Service at: US and Canada 1-888-331-3383

Consumer Products and Accessories Limited Warranty (“Warranty”)
Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD (“BINATONE”).

What Does this Warranty Cover?
Subject to the exclusions contained below, BINATONE warrants that this Motorola branded product (“Product”) or certified accessory (“Accessory”) sold for use with this product that it manufactured to be free from defects in materials and workmanship under normal consumer usage for the period outlined below. This Warranty is your exclusive warranty and is not transferable.

Who is covered?
This Warranty extends only to the first consumer purchaser, and is not transferable.

What will BINATONE do?
BINATONE or its authorized distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.

What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.

Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights that vary from one jurisdiction to another.

original purchase by the first consumer purchaser of the product.
Consumer Accessories| Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product.
Consumer Products and Accessories that are repaired or replaced| The balance of the original warranty or for Ninety (90) days from the date returned to the consumer, whichever is longer.

Exclusions
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage.

Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of MOTOROLA or BINATONE, are excluded from coverage.

Use of Non-Motorola branded Products and Accessories.
Defects or damage that result from the use of Non-Motorola branded or certified Products or Accessories or other peripheral equipment are excluded from coverage.

Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, BINATONE or its authorized service centers, are excluded from coverage.

Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage.
Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage.

How to Obtain Warranty Service or Other Information?

To obtain service or information, please call:
US and Canada 1-888-331-3383
You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a BINATONE Authorized Repair Center.
To obtain service, you must include: (a) the Product or Accessory; (b) the original proof of purchase (receipt) which includes the date, place and seller of the Product; (c) if a warranty card was included in your box, a completed warranty card showing the serial number of the Product; (d) a written description of the problem; and, most importantly; (e) your address and telephone number.
These terms and conditions constitute the complete warranty agreement between you and BINATONE regarding the Products or Accessories purchased by you, and supersede any prior agreement or representations, including representations made in any literature publications or promotional materials issued by BINATONE or representations made by any agent, employee or staff of BINATONE, that may have been made in connection with the said purchase.

FCC and IC regulations

FCC Part l5
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this equipment not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this equipmen

To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The camera unit shall be installed and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more.
This Class B digital apparatus complies with Canadian ICES-003.

WARNING
Changes or modifications to this equipment not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Industry Canada
Operation is subject to the following two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
The term “IC: “ before the certification/registration number only signifies that the Industry Canada technical specifications were met.
This product meets the applicable Industry Canada technical specifications. This device complies with Industry Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Technical Specifications

Camera Unit

Wi-Fi: 802.11b/g/n
Image sensor: Color CMOS
Lens: f 2.6mm, F=2.8
IR LED: 8pcs

Power Adapter: By Keen Ocean Industrial Ltd.
Input: 100-240VAC, 50/60Hz, 0.15A
Output: 5VDC, 1000mA By King Power Leader (HK) Ltd.
Input: 100-240VAC, 50/60Hz, 0.3A
Output: 5VDC, 1000mA

Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. Mac, Mac OS, iPhone, iPad and Safari are the trademarks of Apple Inc., registered in the U.S. and other countries. Android, Google Play and Chrome are trademarks of Google Inc. Wi-Fi is a trademark of the Wi-Fi Alliance. Windows XP and Internet Explorer are trademarks of the Microsoft group of companies. Oracle and Java are registered trademarks of Oracle and /or its affiliates. All other trademarks are the property of their respective owners.

© 2013 Motorola Mobility LLC.
All rights reserved.

Version .0
Printed in China

30082_Scout1_UG_US_EN_V5_2013_08_19.indd 50 19/08/2013 3:41 P

References

• Manual-Hub.com - Free PDF manuals!
• monitoreverywhere.com
• ‎Music Genres and Categories on Apple Music
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>