QUOIZEL WLN1620MBKW Weldin LED 20 Inch Matte Black Gold Flush Mount Ceiling Light Installation Guide
- October 30, 2023
- QUOIZEL
Table of Contents
QUOIZEL WLN1620MBKW Weldin LED 20 Inch Matte Black Gold Flush Mount Ceiling Light
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, install or operate the product.
| Ratings | 120Vac, 60Hz |
|---|---|
| Model No. | Wattage |
| WLN16 MBKW | 35W |
| WLN1620MBKG | 35W |
WARNING
- RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
CAUTION
- For your safety, read instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician.
TOOLS REQUIRED
CARE AND MAINTENANCE
- Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am – 5:00pm EST), or visit us on-line at www.quoizel.com.
PACKAGE CONTENTS
- Fixture Body
1x
MOUNTING HARDWARE
-
Crossbar
x 1 -
Wire Connector
x 3 -
Outlet Box Screw
x 2 -
Mounting Screw
x 2 -
Wall Anchor
x 4 -
Screw
x 4
INSTALLATION
Remove Shade From Fixture Body
Install Mounting Screws to Crossbar
Determine mounting holes for mounting screws
Install mounting screws
*** DO NOT** screw mounting DO NOT screws all in the crossbar. Leave a minimum length of 5/8″ for next installations.
Install Crossbar
Outlet Box
Install Wall Anchors
-
Fit slot holes to mounting screws, rotate the fixture body until it is hung on mounting screws safety.
-
Mark anchor holes locations on the ceiling
-
Remove fixture Body
-
Drill holes for wall anchors from marks
-
Install wall anchors into drilled holes
Your installation is now complete! Restore electricity and save this sheet for future reference.
Released Date: 2022-02-16
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>