NEWSTAR PLASMA-W100BLACK Flat Screen Wall Mount Instruction Manual

: June 16, 2024
: NEWSTAR

Table of Contents

PLASMA-W100BLACK Flat Screen Wall Mount
Caution
Documents / Resources

Instruction Manual

PLASMA-W100BLACK Flat Screen Wall Mount

PLASMA -W100BLA CK
Flat screen w all mount

Step 1b
Install the wall plate on a solid brick or concrete wall

Step 1a
Install the wall plate on a wood stud

Step 2
Installing adapter brakets

Option
Use spacers if necessary

Option a With tilt mechanism
Attaching the tilt mechanism

Step 3
Attaching the screen onto the bracket

Option b
Attaching the screen onto the bracket

Step 4
Securing the braket

Option
Attaching a padlock

Caution

To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personnel injuries arising out of human factors or acts of God, such as earthquake or typhoon.
It is recommended that the Wall mount bracket be installed by qualified personnel only
At least two persons are needed to install or remove the product to avoid hazard of falling objects.
Please carefully inspect the area where the wall mount is to be installed:
– Avoid places that are subject to high temperatures, humidity or contact with water.
– Do not install the product near air conditioning vents or areas with excess dust and fumes.
– Only install on vertical walls and avoid slanted surfaces.
– Do not install in places subject to any shock or vibration.
– Do not install in places subject to direct exposure to bright light, at it may cause eye fatigue when viewing the display panel.
Maintain sufficient space around the display to ensure adequate ventilation.
To ensure safe installation, first check the structure of the wall and select a secure mounting location.
The wall should be strong enough to sustain a weight of at least four times of the display and Wall mount bracket combined. The mounting locationmust be able to withstand earthquake or other strong shock.
Do not modify any accessories or use broken parts. Contact your dealer with any questions.
Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
Drill holes and bolts will be left in the wall once the display and Wall mount bracket are removed. Stains may occur after extended use.
Since the manufacturer has no way to control the wall type and installation of wall mount, the warranty of the product shall only cover the body of the wall mount. The warranty period of the product is 5 years.
Please consult the English language manual for any dispute on conditions.

WWW.NEWSTER.EU

Documents / Resources

| NEWSTAR PLASMA-W100BLACK Flat Screen Wall Mount [pdf] Instruction Manual
PLASMA-W100BLACK Flat screen wall mount, PLASMA-W100BLACK, Flat screen, wall mount
---|---