Pixiot B1-P4S4DWBE Dual Lens Panoramic Bullet Camera User Manual

Pixiot B1-P4S4DWBE Dual Lens Panoramic Bullet Camera

Specification

sWeight: 105g

• FCC Compliance: Part 15

Introduction
This user manual provides detailed instructions on how to use the product. Please read the manual carefully before using the product to ensure proper usage and avoid any potential issues.

Safety Instructions
Before using the product, please take note of the following safety instructions:

• Do not expose the device to water or other liquids.
• Avoid using the product in extreme temperatures.
• Keep the device away from direct sunlight and heat sources.
• Only use the provided power adapter and accessories.
• Do not disassemble or modify the product.

Product Setup
To set up the product, follow these steps:

1. Unbox the product and ensure all components are included.
2. Connect the power adapter to the device and plug it into a power outlet.
3. Insert any necessary batteries into the device.
4. Turn on the device using the power button.

Product Operation
The product can be operated using the following controls:

• Power Button: Press this button to turn the device on or off.
• Navigation Buttons: Use these buttons to navigate through menus and options.
• Function Buttons: These buttons perform specific functions depending on the context.

Maintenance and Care
To ensure the longevity and optimal performance of the product, please follow these maintenance guidelines:

• Clean the device with a soft, dry cloth to remove any dust or debris.
• Avoid using harsh chemicals or solvents on the device.
• Store the product in a cool, dry place when not in use.
• Regularly check for software updates and install them as necessary.

Troubleshooting
If you encounter any issues with the product, refer to the troubleshooting section of the user manual for possible solutions. If the problem persists, contact our customer support for further assistance.

FAQ

• Q: What should I do if the device gets wet?
  A: If the device comes into contact with water, immediately turn it off and disconnect it from the power source. Allow it to dry completely before attempting to use it again.

• Q: Can I use third-party accessories with the product?
  A: It is recommended to use only the provided accessories as third-party accessories may not be compatible and could potentially damage the product.

Please read the instruction manual carefully before using ttie product

Thank you for purchasing Smart Camera. Get started using your new devices by downloading TuyaSmart, one convenient app that manages everything straight from your phone. Easily connect to your home Wi-Fi and control multiple devices from the touch of your fingertips.

What’s in the Box

• Smart Camera ×1
• User Manual ×1
• Adapter ×1
• Screw bag ×1
• Waterproof bag x1

Get Ready

• Know your Wi-Fi network and password
• Make sure your mobile device is running iOS® 8 or higher or Android™ 4. 1× or higher
• Make sure you’re connecting to a 2.4GHz Wi-Fi network (It can’t connect to 5GHz networks)

1. Download the TuyaSmart app from App Store or Google Play.

2. – Register an account on your TuyaSmart app

3. STEP 1. Enter your mobile phone number or email address.

4. STEP 2. Enter the verification code and create a password.

5. Plug in
   How do I reset my device?

   • Using the screw to remove the down panel.
   • Press the Reset Button (as Pic) for several seconds until camera starts to beep.
   • Optional: Insert SD card as shown in Pic.

6. Add device

   • Open TuyaSmart APP, click “+” on the top right corner of the page “HOME”, then select “Smart Camera”.

   • Make sure the indicator light on the device is flashing red quickly, then press “Next) Step”.

   • Enter your “Wi-Fi network and password”, click “OK”.

   • Read the instruction about “Scan with the camera”, click “Continue”.

   • Scan the QR Code on your phone with camera. Heard a prompt tone, click “Heard the beep”.

   • When the indicator light on the device turns from flashing red light to steady green light, the network configuration is complete.

*Please refer to the specific APP interface if there are any difference.

Frequently Asked Questions

1. Can I share with family and friends?
   Yes, you can share your cameras with family and friends who will have access to view the camera and control your bulbs, plugs, and other devices. in the app, press the Profile button and click on the “Home Management” button, and you will be able to give or revoke sharing permissions. In order to share, the other user should already have downloaded the app and registered a new account.

2. What’s the Wireless Range?
   The range of your home Wi-Fi is heavily dependent on your home router and the conditions of the room. Check with your router specifications for exact range data.

3. The device appears offline or unreachable?
   Make sure your Wi-Fi router is online and in range. Make sure you have the latest app functionality by clicking “Check for firmware update” in your device settings.

4. Cannot connect to your Wi-Fi network.
   Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.

5. How many cameras can I control?
   TuyaSmart app can control an unlimited amount of devices in an unlimited amount of locations. Your router may have a limit of how many devices can be connected to one router.

6. is the process same when I add the device through wifi or network cable?
   Yes, they have same process, you can use forth step to add device.

Description of assembly steps

1. Method 1/
2. Method 2

System Requirements

• Moting wit Nein O 8 or higher or Androit 4. 1% or higher

FCC Warning

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.  Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>