TRIPP LITE AGBC5755 Internet Office and BC Personal UPS Systems, 120V AC Input User Manual

: June 16, 2024
: Tripp Lite

Table of Contents

TRIPP LITE AGBC5755 Internet Office and BC Personal UPS Systems, 120V AC
Product Information
FAQ
Important Safety Instructions
Quick Installation
Basic Operation
Service
FCC STATEMENT
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TRIPP LITE AGBC5755 Internet Office and BC Personal UPS Systems, 120V AC

Input

Product Information

Specifications

Input: 120V AC
Series Numbers: AGBC5755, AGBC5756, AGBC5758, AGBC6806
Not suitable for mobile applications

Important Safety Instructions

This manual contains important instructions that should be followed during the installation, operation, and storage of this product. Failure to heed these warnings may affect the warranty.

UPS Location Warnings

Ensure proper location for the UPS to avoid potential hazards.

UPS Connection Warnings

Follow the recommended guidelines for connecting the UPS to your equipment.

Equipment Connection Warnings

Take necessary precautions when connecting your equipment to the UPS.

Battery Warnings

Handle the UPS battery with care and follow the safety guidelines provided.

Quick Installation

Plug the UPS system into an outlet that does not share a circuit with a heavy electrical load, such as an air conditioner or refrigerator.
Press and hold the ON/OFF/TEST button for one second to power on the UPS system. The alarm will sound briefly to indicate a successful startup.

Basic Operation

The UPS system features various indicators and buttons for monitoring and control:

ON/OFF/TEST Button: Used to power on/off the UPS system and initiate a self-test.
ON/OFF LED: Indicates the status of the UPS system.
OVERLOAD/Battery Backup/Surge-Only Outlets: Indicates overload conditions and availability of battery backup or surge protection.
Tel/DSL Jacks: Surge-protected jacks for telephone or DSL connections (available in select models).
Resettable Circuit Breaker: Protects the UPS and connected equipment from overloads.
Communications Port: Available in select models for connecting to a computer using the included USB or DB9 cable.

Service

Tripp Lite offers a variety of On-Site Service Programs. Visit www.tripplite.com/support for more information on service options. Before returning your product for service, follow these steps:

Review the installation and operation procedures in this manual to ensure that the service problem does not originate from a misreading of the instructions.
If the problem persists, do not contact or return the product to the dealer. Instead, visit www.tripplite.com/support for further assistance.

Product Registration

Register your new Tripp Lite product at www.tripplite.com/warranty to protect your investment and be automatically entered into a drawing to win a FREE Tripp Lite product!

Regulatory Compliance

Your Tripp Lite product has been assigned a unique series number for regulatory compliance certifications and identification. Always refer to the series number when requesting compliance information. The series number can be found on the product nameplate label.

UPS and Battery Recycling

Tripp Lite products, including the sealed Lead-Acid batteries used in them, are highly recyclable. Please refer to local codes for disposal requirements. For up-to-date information on recycling Tripp Lite products, including batteries, visit www.tripplite.com/support/recycling- program or call Tripp Lite at 1.773.869.1234.

FAQ

Q: Can I use this UPS for mobile applications?
A: No, this UPS is not suitable for mobile applications.
Q: How can I register my product?
A: To register your Tripp Lite product, visit www.tripplite.com/warranty and follow the registration instructions.
Q: Where can I find compliance information for my product?
A: The series number, located on the product nameplate label, should be referenced when seeking compliance information for your Tripp Lite product.
Q: How can I recycle my Tripp Lite product and its battery?
A: For information on recycling Tripp Lite products, including batteries, refer to local codes or visit www.tripplite.com/support/recycling-program. You can also contact Tripp Lite at 1.773.869.1234 for up-to-date recycling information.

Important Safety Instructions

SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during the installation, operation and storage of this product. Failure to heed these warnings may affect the warranty.

UPS Location Warnings

Use caution when lifting the UPS system. Because of the considerable weight of all rack-mount UPS systems, at least two people should assist in lifting and installing them.
Install the UPS system indoors in an area free from excess moisture, heat, dust, conductive contaminants, and direct sunlight.
The UPS system operating temperature is 32° to 104°F (0° to 40°C). For optimum battery performance, the ambient temperature should be maintained between 68° and 77°F (20° and 25°C).
Leave adequate space around all sides of the UPS system for proper ventilation. Do not obstruct its vents or fan openings.
When mounting the UPS system in tower orientation, make sure the LCD screen panel is at the top of the UPS system, not at the bottom.
Do not mount the unit with its front or rear panel facing down (at any angle). Mounting in this manner will seriously inhibit the unit’s internal cooling, eventually causing product damage not covered under warranty.
The UPS system must be returned to Tripp Lite for battery replacement. Visit www.tripplite.com/support and click the product returns link to request a Returned Material Authorization (RMA) number (an RMA number is required for service). Once the
product request information is completed, an assigned RMA number and shipping instructions will be sent to your email account. See Storage and Service for more information.

UPS Connection Warnings

CAUTION: To reduce the risk of fire, connect only to a circuit provided with branch circuit overcurrent protection under the National Electrical Code, ANSI/NFPA 70 and the Canadian Electrical Code, Part I, C22.1. Short circuit backup protection and overcurrent protection are provided by the building installation. Be sure to use the proper overcurrent protection for the installation under the plug/equipment rating.
The UPS system contains its energy source (battery). The output terminals may be live even when the UPS system is not connected to an AC supply.
Connect the UPS system to a properly grounded AC power outlet. Do not modify the UPS system’s plug in a way that would eliminate its ground connection. Do not use adapters that eliminate the UPS system’s connection to ground.
Do not plug the UPS system into itself. This will damage the UPS system and void the warranty.
If connecting the UPS system to a motor-powered AC generator, the generator must provide filtered, frequency-regulated computer-grade output.

Equipment Connection Warnings

Use of this equipment in life support applications where the failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.
Do not connect surge protectors or extension cords to the output of your UPS system. This might damage the UPS system and may affect the surge protector and UPS warranties.

Battery Warnings

Batteries can present a risk of electrical shock and burn from high short-circuit current. Observe proper precautions. Do not dispose of the batteries in a fire. Do not open the UPS or batteries. Do not short or bridge the battery terminals with any object. There are no user-serviceable parts inside the UPS. At the end of the UPS system’s life, follow best practices by discharging the battery before disposal. Refer to local codes for disposal requirements. Do not connect or disconnect battery packs when the UPS system is operating on battery power.
Do not operate the UPS system without batteries.

Quick Installation

Note: The UPS system will function properly upon initial startup. However, the maximum runtime for the unit’s battery will only be accessible after it has been charged for 24 hours.

Plug the UPS system into an outlet that does not share a circuit with a heavy electrical load, such as an air conditioner or refrigerator.
Press and hold the ON/OFF/TEST button for one second to power on the UPS system. The alarm will beep once briefly after one second has passed.
Note: The UPS system will only power on, even if connected to live utility power, using the ON/OFF/TEST button.
Plug your equipment into the UPS system’s outlets. All outlets provide surge protection and noise filtering. Essential equipment that also requires battery support during power failures, such as a computer and monitor, should be plugged into the battery backup outlets, which are marked with a battery symbol.

Note: your UPS system is designed to support electronic equipment only. You will overload the UPS system if the total VA rating for all equipment connected to the battery backup outlets exceeds the UPS system’s output capacity. Look at the equipment’s nameplates to find their VA ratings. If the equipment is listed in amps, multiply the number of amps by 120 to determine VA (for example, 1 amp x 120 = 120VA). If you are unsure you have overloaded the battery backup outlets, use the ON/OFF/TEST button to run a self-test.

Basic Operation

Service

A variety of On-Site Service Programs are also available from Tripp Lite. For more information on the service, visit www.tripplite.com/support. Before returning your product for service, follow these steps:

Review the installation and operation procedures in this manual to ensure that the service problem does not originate from a misreading of the instructions.
If the problem continues, do not contact or return the product to the dealer. Instead, visit www.tripplite.com/support.
If the problem requires service, visit www.tripplite.com/support and click the Product Returns link. From here you can request a Returned Material Authorization (RMA) number, which is required for service. This simple on-line form will ask for your unit’s model and serial numbers, along with other general purchaser information. The RMA number, along with shipping instructions will be emailed to you. Any damages (direct, indirect, special or consequential) to the product incurred during shipment to Tripp Lite or an authorized Tripp Lite service centre is not covered under warranty. Products shipped to Tripp Lite or an authorized Tripp Lite service centre must have transportation charges prepaid. Mark the RMA number on the outside of the package. If the product is within its warranty period, enclose a copy of your sales receipt. Return the product for service using an insured carrier to the address given to you when you request the RMA.

Product Registration

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
No purchase is necessary. Void where prohibited. Some restrictions apply. See website for details.

FCC STATEMENT

Regulatory Compliance

Regulatory Compliance Identification Numbers
For regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series number. The series number should not be confused with the marketing name or model number of the product.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the user’s authority to operate this equipment.

FCC Part 68 Notice (United States Only)
If your Modem/Fax Protection causes harm to the telephone network, the telephone company may temporarily discontinue your service. If possible, they will notify you in advance. If advance notice isn’t practical, you will be notified as soon as possible. You will be advised of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper operation of your equipment. If it does, you will be given advance notice to allow you to maintain uninterrupted service. If you experience trouble with this equipment’s Modem/Fax Protection, please visit www.tripplite.com/support for repair/warranty information. The telephone company may ask you to disconnect this equipment from the network until the problem has been corrected or you are sure the equipment is not malfunctioning. There are no repairs that can be made by the customer to the Modem/Fax Protection. This equipment may not be used on the coin service provided by the telephone company. Connection to party lines is subject to state tariffs. (Contact your state public utility commission or corporation commission for information.)

UPS and Battery Recycling
Please recycle Tripp Lite Products. The batteries used in Tripp Lite products are sealed Lead-Acid batteries. These batteries are highly recyclable. Please refer to local codes for disposal requirements. Call Tripp Lite at 1.773.869.1234 or visit www.tripplite.com/support/recycling- program for up-to-date information on recycling batteries or any Tripp Lite product. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.