ARCTIC Personal Evaporative Cooler User Guide

ARCTIC Personal Evaporative Cooler

Product Information

This product is a cooling device designed to provide maximum cooling and fan power. It consists of a pre-soak cartridge and a tank for filling with water. The pre-soak cartridge is activated by soaking it under running cold water. Additionally, the cartridge can be placed in the freezer for maximum cooling. The device also features a Turbo Mode or enhanced cooling and fan power.

Product Usage Instructions

1. To activate the cooling function of the pre-soak cartridge, start by soaking it under running cold water.
2. If you desire maximum cooling, place a wet pre-soak cartridge in the freezer until it is completely frozen.
3. Once the pre-soak cartridge is ready, place the device on a flat surface.
4. Fill the tank of the device with cold water from a water pitcher. You can also add ice cubes for even colder output.
5. To achieve the best results, ensure that you are using cold water and/or ice cubes.
6. Press the designated button to start the Turbo Mode, which will provide maximum fan power and cooling.
   Please refer to the product user manual for any additional information or troubleshooting steps.

READ ENTIRE MANUAL BEFORE USE

Congratulations!

• Thanks for buying Arctic Air® Chill Zone XL – the powerful room cooler that pulls in hot air through its evaporative air-cooling filter and turns it into cool, refreshing air … instantly! Experience the cooling comfort of Arctic Air® Chill Zone XL.
• If you have any questions or problems, go to:  www.ChillZonelXLFAQ.com
• If you can’t fmd the answer or do not have access to the internet, call our customer service line Monday-Friday 9am to 6pm EST: 1-877-291-7624

WHAT’S INCLUDED

USAGE

• FILLING THE TANK
  • With cooling cartridge in unit, fill the water tank by gently pouring water into the top until water level reaches the max fill line at the bottom. You can check by looking on the side of the tank
  • For Best Results, use cold water.

• FAN SPEED
  Arctic Air® Chill Zone XL has 3 fan speeds High, Medium, and Low. To set desired speed, press the button on the top control panel.

• TURBO MODE
  Press the bulton to start TURBO mode for maximum airtlow and cooling.

• COOLING CONTROL

  • Control cooling output by pressing button.
  • You can choose HIGH cooling mode, LOW cooling mode or Off.

• LIGHT SETTING
  Choose your light color by pressing button.You can choose between solid colors or a color-cycle mode. Adjust brightness level by holding button down for 3 seconds, choosing setting, and pressing button again to confirm.

• OSCILLATION
  Arctic Air® Chill Zone XL also has wide-coverage oscillation built-in. Press the button once for continuous oscillation, or press again to stop the unit where it is currently is.

MAINTENANCE

We recommend weekly cleaning of your Arctic Air® Chill Zone XL and Cartridge to keep in best working condition, and replacing the Cartridge every 3-6 months.

UNIT CLEANING

• To prepare for cleaning, run Arctic Air® Chill Zone XL until all water has emptied from the water tank, or hold Arctic Air® Chill Zone XL over a sink and carefully pour out to avoid splashing or spilling.
• Remove cartridge from Arctic Air® Chill Zone XL. Using warm, soapy water, wipe water tank and grill, then rinse off cartridge. Wipe off soap and let air dry.
• If you notice water tank is dirty, use a small, bendable brush (i.e. toothbrush, bottle brush, etc) and carefully clean the inside of the tank until clean. Rinse clean with warm water.

HAND WASH:
Hand wash gently with warm water & soap. Shake out excess water & let air dry.
IMPORTANT: If you see mold on the cartridge or notice a musty smell, stop and clean the cartridge before further use. Fully submerge the cartridge in a pot or bowl filled with equal parts clean water and white vinegar – allow to soak for 45-60 minutes. Rinse with warm water, wring out and let air dry.

WARNING:

• Do not carry Arctic Air® Chill Zone XL when filled with water. Some water may remain in unit even if tank is empty.

• Use only clean water. If needed, use distilled water.

• Please read and follow regular maintenance as recommended in “Maintenance· section of this guide.

• Arctic Air® Chill Zone XL works best in non-polluted areas. Large dust/dirt particles may reduce lifetime of unit.

• We recommend use only in dry locations. If using in a moist area or environment, take care not to get water on external areas of the product.

• If a leak or spill occurs on the surface of device, unplug Arctic Air® Chill Zone XL and let it dry for 24 hours.
  Then, use as normal.

• Do not place in direct sunlight for extended periods of time.

• Before not using Arctic Air® Chill Zone XL for extended periods of time, empty the water tank, turn unit on, and set to highest fan speed for at least 4 hours. This will dry out then cartridge and inside of your unit.

• Only use the original power adapter and cord supplied in package.

• Do not touch the power supply or power cord with wet hands.

• Unplug Arctic Air® Chill Zone XL when cleaning, removing/replacing cartridge, or moving the device.

• For best results, place Arctic Air® Chill Zone XL on a higher surface like a table or countertop.

• Do not place Arctic Air® Chill Zone XL near a heater or any electrical equipment.

• Do not place the device in passageways or high traffic areas where there is a possibility of tripping or knocking it over.

• Do not allow any foreign objects inside Arctic Air® Chill Zone XL.

•  Do not place items on top Arctic Air® Chill Zone XL.

• Do not block the front and back grills of the device.

• Do not turn the device upside down.

• Do not submerge the Arctic Air® Chill Zone XL under water or other liquids.

• Do not place Arctic Air® Chill Zone XL near open flames or fire sources.

• People with limited physical, visual or mental abilities or lacking proper experience and/or knowledge should never use the device without supervision of those responsible for their safety or those capable of assistance in using the device.

• The device can be switched off completely only when disconnected from the power supply.

• The manufacturer does not bear any responsibility for any damage from failure to comply with this product guide.

• A replaceable water cartridge is designed specifically for this product. If your cartridge has been broken or damaged, you can purchase a replacement.
  ONTEL” ASSUMES NO RESPONSIBILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF THE PRODUCT. IN PURCHASING AND USING THIS PRODUCT, YOU ASSUME ALL RESPONSIBILITY FOR CLEANING THE PRODUCT AND MONITORING THE PRODUCT FOR MOLD. ADDITIONALLY. ONTEL ® SPECIFICALLY DISCLAIMS ALL EXPRESSED WARRANTIES NOT OTHERWISE SET FORTH HEREIN AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION OF THE FACE HEREOF.

FOR THE BEST RESULT

• To ACTIVATE COOLING, soak your cartridge under running cold water.
• For MAXIMUM COOLING, place a wet cartridge in the freezer until frozen.

• Place on flat surface & fill tank from a water pitcher. For best results use cold water and/or ice cubes.
• Press to start TURBO MODE for maximum fan power and cooling.

DO NOT USE ARCTIC AIR® CHILL ZONE XL WITHOUT CARTRIDGE. WATER MAY LEAK OUT ONTO FLOOR.

References

• Arctic Air® Chill Zone™ XL - Frequently Asked Questions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>