MOTOROLA H300 Bluetooth Handsfree Headset Instruction Manual

MOTOROLA H300 Bluetooth Handsfree Headset

BEFORE YOU BEGIN

Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.

Take a moment before you get started to familiarize yourself with your new H300 Handsfree Headset.

INSERT BATTERY

In Your Headset

Insert a new battery into your headset:

1. Open the battery door at the back of the headset.
2. Insert a new battery so that the + and – markings match the markings in the battery compartment.
3. Close the battery door.

START BLUETOOTH

Feature On Your Phone

Your phone’s Bluetooth feature is off by default. To use your headset, turn on the Bluetooth feature in your phone.

For most Motorola phones:

1. Select (Menu) > Settings > Connection > Bluetooth Link > Setup.
2. Scroll to Power.
3. Press Change.
4. Scroll to On.
5. Press Select to turn on the Bluetooth feature. Bluetooth feature remains on until you turn it off.

Note: These steps are for most Motorola phones. For other phones, see your phone’s user’s guide.

PAIR Your Headset

Step A – PUT HEADSET IN PAIRING MODE

Before you can use your headset, you must pair (link) it with your phone.

1. With the headset power off, press and hold the Call button for 6 to 10 seconds until the blue indicator light turns on and remains steadily lit. (The light will flash while you hold the Call button.)
2. If the indicator light is flashing or does not remain steadily lit, turn off the headset and repeat step 1.
   Note: To turn off headset, see “Turning On and Off” on the reverse side of this guide.

PAIR Your Phone

Step B – SET THE PHONE TO LOOK FOR YOUR HEADSET

For most Motorola phones:

1. Select (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices.
   The phone lists all Bluetooth devices it finds.
   

2. Select Motorola H300.

3. Press OK or Yes to pair (link) the handsfree device.

4. Enter the passkey 0000 and press OK.
   Note: Passkey cannot be changed from 0000.

When your headset is successfully paired with your phone, the blue indicator light changes from steadily lit to flashing.

Note: These steps are for most Motorola phones. For other phones, see your phone’s user’s guide.

TEST AND USE

Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call:

1. Place the headset over your ear. See “Wearing the Headset” on the reverse side of this guide.
2. On your phone, dial the number you want to call and press the Send key.
3. If your phone and headset are successfully paired, you will hear ringing on the headset.
   After you have successfully paired your phone and headset, you do not need to repeat these initial setup steps each time you use the headset.

USING YOUR H300

See Features and Functions Guide on the reverse side of this guide for information on using your H300.

American Communication Systems
Discover the power of communication

TO ORDER- VISIT http://www.ameradio.com

TURNING ON AND OFF

To turn your headset on , press and hold the Call button until the indicator light flashes. Then, release the button.

To turn your headset off, press and hold the Call button until the indicator light flashes rapidly and then turns off.

To conserve battery power, turn off your headset when you don’t plan to use it for a while.

WEARING THE HEADSET

1. Open the earhook.
2. Loop the earhook over your ear.
3. Press the headset to your ear.
   

CHANGING FOR USE ON OTHER EAR

You can wear your H300 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear:

1. Open the earhook 90 degrees from the headset.
2. Gently lift and pull the top of the earhook up and off the upper hinge pin. Then, pull it away to remove it.
3. Flip the headset over.
4. Hook the bottom of the ear hook onto the lower hinge pin, then lift and pull the top of the earhook over the upper hinge pin.
   

CHANGING VOLUME BUTTON ORIENTATION

If you change your headset to wear on the other ear, you can also change the orientation of the Volume buttons.

1. Turn the headset power off.
2. Press the Call button and the Volume button you want to assign as the “volume up” button until the blue indicator light flashes twice.
   The headset power turns on.
   

MAKING CALLS

(places first call on hold)
Toggle between two active calls| Press and hold the Call button
Join a 3-way call| Press and hold both Volume buttons
Put an active call on hold or resume a call on hold| Press and hold the Call button until you hear a beep
Transfer a call from the phone to the headset| Tap the Call button
Disable or enable the indicator light| Press and hold both Volume buttons for 3 to 4 seconds
Mute or unmute a call| Tap both Volume buttons

Note: Your H300 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone’s user’s guide for more information.

Note: Some features are phone/network dependent.

INDICATOR LIGHTS

The indicator lights provide information about your headset status.

Note: After 5 minutes of inactivity, the light stops flashing to conserve power, but the headset remains in standby mode.

AUDIO TONES

The audio tones provide information about your headset status.

TROUBLESHOOTING

My phone does not find my headset.
Make sure the blue light on your headset is steadily lit when your phone is searching for devices (see step 3).

My headset worked before but now it’s not working.
Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature has been turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2). If you have confirmed the Bluetooth feature is on in your phone, pair your phone and headset again (see step 3).

Support.
If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/bluetooth and click Support.

CUSTOMER SUPPORT

Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196

www.hellomoto.com
1-877-MOTOBLU
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States for hearing impaired)
1-800-461-4575 (Canada)

Part Number: 6809495A08-A
If you need more help, contact us at 1-877-MOTOBLU.

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners.

The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.

© Motorola, Inc. 2005.

H300
Bluetooth®
Handsfree Headset

IMPORTANT:
Be sure to first follow the MOTOSTART

Quick Start Guide on the reverse side of this guide to complete initial setup of your H300

FOR MORE INFORMATION ON USING YOUR MOTOROLA H300
Visit us at www.hellomoto.com/bluetooth and click Support.

SUPPORT
If you need more help, contact us at 1-877-MOTOBLU.

Documents / Resources

| MOTOROLA H300 Bluetooth Handsfree Headset [pdf] Instruction Manual
H300 Bluetooth Handsfree Headset, H300, Bluetooth Handsfree Headset, Handsfree Headset, Headset
---|---

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>