ECO-WORTHY L03TGSF12-SCB-1 Dual Axis Solar Tracker User Manual
- June 16, 2024
- ECO-WORTHY
Table of Contents
ECO-WORTHY L03TGSF12-SCB-1 Dual Axis Solar Tracker
Product Information
Specifications
- Main Pole: x1
- B-Rod: x1
- C-Rod: x1
- D-Rod: x1
- E-Rod: x2
- 1500mm Channel Steel: x8
- 300mm Linear Actuator: x1
- 150mm Linear Actuator: x1
- Wind Speed Sensor: x1
- Sunlight Sensor: x1
- U-Shaped Connector: x2
- U-Shaped Locker: x8
- Linear Actuator Stand: x4
- Solar Panel Side Clamp: x12
- Solar Panel Middle Clamp: x6
- Sunlight Sensor Stand: x1
- Solar Tracker Controller: x1
- Compass: x1
- M8*20 Hex Socket Cap Bolt: x8
- M10*20 Hex Socket Cap Bolt: x8
- M8*40 Hex Socket Cap Bolt: x18
- M10*60 Hex Socket Cap Bolt: x12
- M10*70 Hex Socket Cap Bolt: x4
- M10*100 Hex Socket Cap Bolt: x8
- M14*110 Hex Socket Cap Bolt: x1
- M6*12 Hex Cap Bolt: x2
- M10*40 Hex Cap Bolt: x1
- M4*16 Round Cap Bolt: x4
- Expansion Bolt: x8
- Latch: x6
- Flange Nut: x2
- Hex Nut: x34
- Flat Washer: x62
- Elastic Washer: x34
Product Usage Instructions
-
Step 1: Main Pole Installation
-
Place the main pole correctly by using the compass to align it with the directions indicated on the main pole (South, North, West, East).
-
The main pole must be installed on solid concrete ground or a pier using the provided expansion bolts. The solid ground base must be at least a 600600700mm cube.
-
Step 2: B-Rod Installation
Attach the B-Rod to the main pole using the provided M14*110 Hex Socket Cap Bolt, M14 Hex Nut, M14 Flat Washer, and M14 Elastic Washer. -
Step 3: C-Rod Installation
Attach the C-Rod to the main pole using the provided M10*50 Latch. -
Step 4: D-Rod Installation
Attach the D-Rod to the main pole using the provided M10*100 Hex Socket Cap Bolt, M10 Nut, M10 Flat Washer, and Elastic Washer. Align the D-Rod with the East and West directions. -
Step 5: E-Rod Installation
Attach the E-Rods to the main pole using the provided 1500mm Channel Steel, M10100 Hex Socket Cap Bolt, M1060 Hex Socket Cap Bolt, M10 Hex Nut, M10 Flat Washer, and Elastic Washer. Align the E-Rods with the East and West directions. -
Step 6: Linear Actuator Installation
Attach the 150mm Linear Actuator to the Linear Actuator Stand using the provided M820 Hex Socket Cap Bolt. Secure the stand to the main pole using the M630 Latch. -
Step 7: Linear Actuator Installation
Attach the 300mm Linear Actuator to the Linear Actuator Stand using the provided M820 Hex Socket Cap Bolt. Secure the stand to the main pole using the M630 Latch. -
Step 8: Solar Panel Installation
Attach the Solar Panels to the E-Rods using the provided Solar Panel Side Clamps, Solar Panel Middle Clamps, M1070 Hex Socket Cap Bolt, M1020 Hex Socket Cap Bolt, M10 Hex Nut, M10 Flat Washer, and Elastic Washer. -
Step 9: Sunlight Sensor Installation
Attach the Sunlight Sensor to the Sunlight Sensor Stand using the provided M612 Hex Socket Cap Bolt. Secure the stand to the main pole using the M1040 Hex Socket Cap Bolt. Use the Flange Nut, M10 Hex Nut, M10 Flat Washer, and Elastic Washer to secure the Sunlight Sensor. -
Step 10: Solar Tracker Controller Installation
Install the Solar Tracker Controller according to the provided instructions. -
Step 11: Solar Panel Sizing
Use the Solar Panel Sizing Formula: L + 2W ≤ 2800mm to determine the appropriate size of the solar panels.
FAQ
Q: What is the contact number for support?
A: For support, you can contact us at the following numbers:
- US: 1-866-939-8222
- UK: +44 20 7570 0328
- DE: +49 693-1090-113
Q: What is the email address for customer service?
A: For customer service inquiries, please email us at customer.service
@eco-worthy.com
Q: Is there an installation and setting video available?
A: Yes, there is an installation and setting video available. Please refer
to the provided link for more information.
DUAL-AXIS SOLAR TRACKER
SAFETY PRECAUTIONS
- For the proper use and maintenance of this product, please read carefully and understand this instruction before installation.
- Make sure that the tracker system is installed on a solid concrete ground which is strong enough to hold the weight of all the tracker and solar panels.
- Make sure all the bolts and nuts are firmly tightened during the installation.
- To adjust the angle of the solar panels, loosen the side clamps and middle clamps first and then move the panels carefully. DO NOT adjust the solar panels by force.
- During long-time usage, some components might be loosened or corroded. For safety, please check the tracker regularly.
- In stormy weather with a wind speed greater than 17.2m/s, it is best to remove the solar panels to prevent damage to the bracket.
WHAT’S IN THE BOX
Installation
- There are 4 signs on the main pole that indicate directions (South, North, West, East). Use the compass to place the main pole correctly so that the tracker can track the sun properly.
- The main pole must be installed on solid concrete ground or pier with the expansion bolts.
- The solid ground base must be larger or equal to a 600600700mm cube.
- Recommend concrete material (kg/m³): Cement(450kg)+Water(183kg)+Sand(600kg)+ Gravel (1,192kg)
SUPPORT
- For the use of this manual and the conditions or methods of installation, operation, use, and maintenance of product are beyond ECO-WORTHY’s control, ECO-WORTHY does not accept responsibility and expressly disclaims liability for any loss, damage, or expense arising out of or in any way connected with such installation, operation, use or maintenance.
- No responsibility is assumed by ECO-WORTHY for any infringement of patents or other rights of third parties, which may result from the use of the product.
- No license is granted by implication or otherwise under any patent or patent rights.
- The information in this manual is based on ECO-WORTHY’s knowledge and experience and is believed to be reliable, but such information including product specification (without limitations) and suggestions do not constitute a warranty, expresses or implied.
- ECO-WORTHY reserves the right to change the manual, the products, the specifications, or product information sheets without prior notice.
- This product is covered by a 1 year warranty provided by ECO-WORTHY Ltd. We will refund or partial refund or replace any products with defects due to our imprudence. If you are experiencing technical problems and cannot find a solution in this manual, please contact ECO-WORTHY for further assistance.
Contact Number:
- US: 1-866-939-8222
- UK: +44 20 7570 0328
- DE: +49 693-1090-113
Email:
customer.service@eco-worthy.com
Installation & Setting Video:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>