H7121 Govee Smart Air Purifier User Manual
- June 4, 2024
- Govee
Table of Contents
H7121 Govee Smart Air Purifier
Safety Instructions
General Safety
- Only use Smart Air Purifier as described in this manual.
- Do not use without removing the plastic wrap from the filter. If not removed, the air purifer will not filter air, and may overheat, causing a fire hazard.
- Do not use the air puriher outdo0rs.
- Keep the air purifier away from water or wet, damp areas. Never place in water or liquid.
- Do not use in excessIvely humid areas.
- Keep the air punher away trom heat sources such as stovetops, ovens, or radiators.
- Do not use where combustible gases, vapors, metallic dust, aerosol (spray) products, or fumes from industrial oil are present.
- Keep / 1.3m away trom where oxygen is being administered.
- Do not place heavy white o a
- Keep the inside of the air purifier dry. To prevent moisture build-up, avoid placing in rooms with major temperature changes or underneath air conditioners
- Always unplug the air puncher before servicing (Such as when changing the filtr
- Do not use the air purifier if it is damaged or not working correctly, or if the power cord or the plug is damaged. Do not repair yourself. Lontact Lustormer Support
WARNING:
To reduce the risk of fire or electric shock, do not use this air purifier in combination with any 3rd party controls (such as a dimmer switch). Not for commercial use. Household use only
Power cord & Plug
- Located the air purifier near the electrical outlet it is plugged into.
- Never place the power cord near any heat source.
- Do not cover the power cord with a rug,. carpet, or other covering. Do not place the cord under furniture or appliances.
- Keep the power cord out of areas where people frequently walk. Place the cord where will not be tripped over,
- This air purifier has a polarized plug (one prong is wider than the other), which fits into a polarized outlet in only one orientation.
- This is a safety feature to reduce the risk of electric Soc. the plug does not reverse the plug to the correct orientation. does not, do not bypass this safety feature and try forcing the plug into the outlet
- This air purifier uses standard US 120V, 60Hz outlets. If using outside the US, check for compatibility.
Package Include
Specification
Getting to know your Smart Air Purifier
- a. Fan Speed Indicator
- b. Fan Speed Button
- c.On/Off Button
- d. Sleep Mode Button
- e. Timer Button
- f.Timer Indicator
- g.WiFi° Indicator
- h. Night Light Button
- i. Lock Button
- j.Filter change Indicator &Button
- k. Air Outlet
- L Housing
- m. Air Inlet
- n. Power Cord
- o. Filter Cover
- p. True HEPA Filter
- q. Screw Nut
Getting Started
-
* Flip the air purifier over. Twist the screw nut counter clockwise and remove bottom filter cover.- Remove the filter from its plastic packaging and place the filter back into the air purifier.
- Reattach the filter cover and twist clockwise screw nut to lock.
- Place the air purifier on a flat, stable surface with the display facing up. Allow at least 15 inches/38cm of clearance on all sides of the air purifier. Keep away from anything that would block airflow, such as curtains.
Using Your Smart Air Purifier
Using Govee Home App allows access to additional functions and features, along
with the ability to control the air purifier remotely.
Functions and Controls
Power On & Off
Plug in the power cord, and all lights will flash once.The air purifier will
then enter stand-by status automatically. Tap On/Off Button to turn the air
purifier On/Off. The fan wll start on level l once turned On. Note: Ensure the
outlet’s voltage is compatible with Smart Air Purifier or else it may cause
damage.
Change Fan Speed
Tap Fan Speed Button to change fan speeds between I, I, and ll.
Note:
- The fan speed indicators are not buttons and cannot be used to change fan speed.
- The fan speed indicators willight up when active.
- Fan speed l is the loudest, but cleans the air quickest.
- For best results, or to address a specific air quality issue such as smoke, run the air puriñer at high speed (fan speed ll) for 15-20 minutes before using a lower speed.
- To effectively clean air, keep windoWs and doors closed while the air puriner is on.
Timer
- Tap Timer Button repeatedly to select a time.
- To cancel a timer, tap Timer Button until all timer indicators are off.
Note:
- The fan speed indicators are not buttons and cannot be used to change fan speed.
- The fan speed indicators will light up when active.
- Fan speed ll is the loudest, but cleans the air quickest.
- For best results, or to address a specific air quality issue such as smoke, run the air purifier at high speed (tan speed ll) for 15-20 minutes before using a lower speed.
- To effectively clean air, keep windows and doors closed while the air purifier is on.
Sleep Mode
- Tap Sleep Mode Button once to turn Sleep Mode on.
- Tap Sleep Mode Button again to exit Sleep Mode.
Note:
- Sleep Mode dims all icons to very low brightness and operates quietly by using a fan speed lower than fan speed I.
- Tapping Fan Speed Button will exit Sleep Mode.
- You can still adjust the night light and timer while the air puriñer is in Sleep Mode.
Night Light
- Tap once to turn on the night light.
- Tap again to turn off the night light,.
Note:
- You can turn the night light on and off using the Night Light button, even when the air puriffer is turned off (as long as it is still plugged in to power).
- You can also adjust night light brightness using Govee Home App. The puriñer unit will remember this set brightness.
Lock
Press and hold Lock Button for 3 seconds on lock/unlock the display.
Note:
- Locking the display prevents settings from being accidentally changed. When locked, the display will not respond to being tapped.
- While the display is locked, Lock Button will light up. If other buttons are tapped, Lock Button will flash 3 times.
- The air purifier can still be controlled using Govee Home App when the display is locked.
- To operate the display’s buttons, you must unlock the display.
Memory Function
Even while turned off or unplugged, the air purifñer will remember its previous fan speed, sleep mode, and night light brightness settings.
Note:
The memory function does not work with the off-delay timer, lock display feature, or night light settings (except for the light brightness setting).
Filter Change Indicator
When the lifetime of the filter reached, the filter exchange indicator light will be lighted up with red. After replace with the new filter, press and hold the button for 3s. When the indicator light flashes 3 times, means the reset completed.
Note:
- After the filter reset, the filter usage time will be recalculated.
- You can also reset the filter exchange indicator by 3s long-press, even the indicator light is not on.
LED Indicators
Pairing Your Smart Air Purifier with Govee
Home App
Due to ongoing updates and improvements, Govee Home app’s interface and
features may be slightly different than those shown in the manual. In case of
differences, follow the in-apPp instructions.
Pairing Steps
- To download the Govee Home App, scan the QR code or search “GOVEE” in the Apple App
- Store (iOS devices) or Google Play Store (Android devices).
- Turn on your smartphone’s Bluetooth.
- 0pen the Govee Home App, tap the”+” icon in the top right corner, and search “H7121.
- Tap the device icon and follow the on-screen instructions to complete pairing.
Note:
- You can use the Govee Home App to connect your smart purifier to Amazon Alexa or Google
- Assistant. Follow the in-app instructions to connect Govee Home App to your voice assistant.
- The Govee Home App is continually updated and App features will expand.
About the Filters
The air purifier uses a 3-stage filtration system to purify air.
Pre-Filter
- Captures large particles such as dust, lint, fibers, hair, and pet fur.
- Maximizes the filter’s life by protecting it from large debris. H13 True HEPA Filter
- Captures at least 99.97% of airborne particles 0.3 microns (um) in size.
- Filters small particles such as fine dust, smoke particles, pollen and pet dander
Activated Carbon Filter
Physically adsorbs smoke, odors, and fumes. Filters compounds such as formaldehyde, benzene, ammonia, hydrogen sulfide and volatile organic compounds (VOcs).
Clean Air Delivery Rate
This air purifñer has a Clean Air Delivery Rate (CADR) of 120 cubic feet per minute (CEM), or 204m’/h. CADR measures the efficiency of an air purifier by indicating the volume of clean air it purifies per minute. This is based on the removal of dust, pollen, and smoke, which are the 3 most common indoor air pollutants. The higher the CADR, the more particles the air purifier will remove and the larger the area it can clean. The rating is measured at the air purifier’s highest speed.
Air Change Per Hour
- The Air Change Rate is how many times all of the air in a room can be purifñed (or “changed”) by the air purifier in 1 hour. Air changes per hour are calculated on the recommended room size, assuming 8 ft/ 2.4m ceilings.
- For smaller rooms, the air change per hour will increase. This air purifier has an air change per hour of 5, which means it can change air 5 times per hour at the max speed in a single, closed room up to 183 ft/ 17m:. The air purifñer is effective for larger rooms, but air purifñication will take longer, with fewer air changes per hour.
Note : To effectively clean air, keep windows and doors closed while the air purifier is on.
Humidity
Moisture may damage the filters. This air puriñer should be used in an area with a humidity level below 85% RH. If the air purifier is used in excessively humid areas, the surface of the filter may become moldy.
Essential Oils
- Do not add essential oils to the air puriñer or filter.
- The filter can be damaged by the oil and will eventually release an unpleasant smell.
- Do not use diffusers near the air purifer.
Care And Maintenance
- Cleaning Smart Air Purifier
- Do not clean the air purifier with abrasive chemicals or flammable cleaning agents.
Cleaning Steps
- Unplug before cleaning.
- Wipe the outside of the air purifier with a soft, dry cloth. If necessary, wipe the housing with a damp cloth, then immediately dry.
- Vacuum the inside of the air puriñer.
Cleaning the Filter
Do not clean the filter with water or other liquids. The outer pre-flter
should be cleaned every 2-4 weeks to increase efficiency and extend the life
of the filter. Clean the pre-filter using a soft brush or vacuum hose to
remove hair, dust, and large particles.
Replacing the Filter
The filter should be replaced every 6-8 months. You may need to replace your filter sooner or later depending on how often you use your air purifier.
Replacing Steps
- Unplug the air purifier. Flip the air purifier over and remove the bottom filter cover.
- Remove the old filter.
- Clean out any remaining dust or hair inside the air puriñer using a vacuum hose. Do not use water or liquids to clean the air purifier.
- Unwrap the new filter and place it into the housing
- Reattach the cover. Plug in the air purifier.
- Reset the Filter Change Indicator.
Note:
To maintain the performance of your air purifier, only use official Govee
filters. To buy replacement filters, visit Govee’s online store. Remember to
reset the Filter Change Indicator after changing the flter.
Filter Replacement Time Period
- Using your air purifier in an environment with relatively high pollution may mean you will need to replace the filter more often, even if the Filter Change Indicator is off.
- You may need to replace your filter if you notice any of the following:
- Increased noise when the air puriñer is on
- Decreased airflow
- Unusual odors
- A visibly clogged filter
Resetting the Filter Change Indicator
When the Filter Change Indicator light red, it prompts to reset the filter service life.
Filter Change Indicator
Press and hold Filter Change Button for 3 seconds. Filter Change Indicator will flash 3 times and then turn off once successfully reset. Filter Change Indicator will light up as a reminder to replace the filter. Depending on how often you use the air purifer, the indicator should turn on within 6-8 months. You may not need to replace your filter immediately, but you should check the filter when Filter Change
The indicator turns on.
If the filter was recently changed before Filter Change Indicator light up,
reset the countdown again by pressing and holding Filter Change Indicator for
3 seconds.
Storage
If not using the air purifier for an extended period of time, wrap both the
air purifñer and the filter in plastic packaging and store in a dry place to
avoid moisture damage.
Troubleshooting
The troubleshooting section below is for solving frequently asked questions
for the purifñier unit. If your problem persists, please contact customer
support.
For Smart Air Purifier
For App & Connectivity
- Cannot connect to the Govee Home App.
- Make sure the Bluetooth of your smartphone is enabled and your smartphone is not connected with other Bluetooth air puriñers.
- Enable the smartphone’s Location Services
- Try connecting with another smartphone.
- Make sure your App is the latest version.
- Make sure you are connected to the 2.4GHz network, and confirm the network is working correctly.
- Make sure the Wi-Fi password you entered is correct.
- Shorten the distance between the air puriñer, WI-Fi router, and the smartphone.
- Make sure your air puriñer and the Wi-Fi router are located away from appliances that produce electromagnetic radiation (e.g. microwave ovens, refrigerators, etc.).
- If you are using a VPN, try turning it off and then connecting the air purifier. Disable portal authentication for your Wi-Fi network. If portal authentication is enabled, this air purifier will not be able to access your Wi-Fi network, and setup will fail. Portal authentication means that you need to sign in to your Wi-Fi network through a web page before you can use the Internet.
- Cannot find the air purifer within in nearby Bluetooth air purifiers list. The air purifier may be connected with another smartphone. Disconnect it from the other smartphone first.
- The air purifier is offline.
- Make sure the air purifier is plugged in and powered on, then– refresh “My air purifiers” in the Gove Home App by swiping down on the screen.
- Make sure your router is connected to the internet, and your phone’s network connection is working.
- If the Wi-Fi password has changed, the air purifier will automatically go offline. Iry connecting it to the network again.
- Delete the offline air purifier from the Govee Home App, then add and reconfigure the air purifier again in the Govee Home App.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Any Changes or modifications not expressily approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver IS connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm. FCC ID:2AQAG-H7121
The following importer is the responsible party
- Name: GOVEE MOMENTS(US) TRADING LIMITED
- Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448
- Email: [email protected]
- Contact information: https://www.govee.com/support
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.” This Class B digital apparatus complies with Canadian ICES-003.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.
Bluetooth
The Bluetooth” word mark and logos are registered trademarks owned by Bluetooth SlG, Inc. and any use of such marks by Shenzhen Intellirocks Tech. Co., Ltd. is under license.
Customer Service
- Warranty: 12-Month Limited Warranty
- Support: Lifetime Technical Support
- Email: [email protected]
- Official Website: www.govee.com