SOLGAARD 2BBXY BOOMBOX Bluetooth Speaker User Manual

SOLGAARD 2BBXY BOOMBOX Bluetooth Speaker

Product Information

• Product Name: Boombox
• Model Number: D02V001A00011.0A
• Revision: R1.0A
• Order Number: 70 500
• Date of Release: 2023-08-15
• Issued By: Cindy
• Material Description: 105g Matt Art Paper
• Surface Treatment: Black printing, 4 folds, matte varnish
• Technology: RoHS, REACH compliant
• General Tolerances: Tolerances as per industry standards

Product Usage Instructions

1. Unboxing: Carefully remove the Boombox from its packaging.
2. Power Connection: Plug in the power cable to the designated power outlet.
3. Audio Source Connection: Connect your desired audio source (e.g., smartphone, MP3 player) to the Boombox using an appropriate audio cable.
4. Power On/Off: Press the power button to turn on/off the Boombox.
5. Volume Control: Adjust the volume using the dedicated volume buttons or knob.
6. Playback Controls: Use the provided controls (buttons or touchpad) to play, pause, skip tracks, and control other playback functions.
7. Equalizer Settings: Customize the sound output by selecting different equalizer presets or manually adjusting bass, treble, and other settings if available.
8. Bluetooth Pairing: If your Boombox supports Bluetooth connectivity, follow the manufacturer’s instructions to pair it with your Bluetooth-enabled devices.
9. Auxiliary Input: If available, use the auxiliary input port to connect external audio devices.
10. Battery Operation (if applicable): If the Boombox has a built-in battery, charge it fully before initial use and follow the provided instructions for battery usage and maintenance.
11. Maintenance: Keep the Boombox clean by wiping it with a soft cloth. Avoid exposing it to extreme temperatures or moisture.

FEATURES

Battery holds enough power to charge an iPhone 14 up to 3 times.

SOLAR POWER FUNCTION

1. Single press the power button.
2. White LED’s indicate battery level.
3. Green LED’s indicate strength of solar charging.

• In ideal sunlight it will generate approximately 350mAh per hour.
• 1 hour of ideal sun = 2 hours of music.
• Generates power in sunlight & non-direct sunlight.

Solar is intended to extend the life of the battery – not charge from 0% If you were to charge from 0-100% it would take 30 hours of ideal sunlight.

PAIRING AND PARTY MODE

Pairing Bluetooth Device
Hold the power button for 2 seconds to power-on and automatically enter Bluetooth search mode. This button also acts as the Play/Pause button.
LED light rapidly blinks when searching for a connection.
After power-on, the Boombox will automatically connect to a recognized device or stay in search mode for 5 min for a new device to be paired.

Volume / Skip Track Buttons / Disconnect Device
+/- PRESS EITHER once for volume up or down.
+/- HOLD EITHER for 1 sec to navigate track playback.
+/- HOLD BOTH for 1 sec to disconnect and enter Bluetooth search mode.

“Party Mode’ – Pairing Two Boomboxes
With both Boomboxes on and only one is connected via Bluetooth, triple press the power button on both Boomboxes. They connect with each other automatically.

CHARGING YOUR PHONE

Connect your device via USB cable, then press the power button once to activate charging.
Fastest charging occurs when only one device is connected. Supports charging multiple devices simultaneously with a shared 20W MAX OUTPUT.

CHARGING SOLAR BOOMBOX

SPECS / ADDITIONAL INFO

AUTO-OFF FEATURE
To reduce power consumption, the device will power-off after 5 m or after 15 minutes of no activity when a Bluetooth connection does exit.

FCC

IMPORTANT NOTE: FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device

The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance.

An incorrect battery type can defeat a safeguard, such as in the case of some lithium battery types. Disposal of a battery into a fire or a hot oven, or mechanical crushing or cutting of a battery, can result in an explosion. A battery left in an extremely high-temperature environment can result in an explosion or the leakage of flammable liquid or gas. A battery subjected to extremely low air pressure could result in an explosion or flammable liquid or gas leakage.

RF output power (only for CE/UKCA):
Bluetooth: 2.02dBm; BLE: 1.95dBm

MANUFACTURER INFORMATION:
Company   name: Solgaard Design Inc
Address: 270 Lafayette St. Suite 902, New York, New York, 10012,
USA Customer Support Email: Help@Solgaard.co

IMPORTER INFORMATION:
Company name: XXXXXXXX
Address: XXXXXXXXXXXXXXXX

Solar Boombox Package Contents

MORE DETAILS AVAILABLE AT Solgaard.co/manuals

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>