NOBLE FALCON MAX True Wireless Stereo Earbuds Instruction Manual

True Wireless Stereo Earbuds
Model ： FALCON MAX
Instruction Manual

Thanks for purchasing Noble FALCON MAX bluetooth 5.3 true wireless earbuds.
Please read carefully the instruction manual before use.

Packing List

Product Overview

Power On
Before first use, please charge your Noble FALCON MAX TWS Earbuds to make sure there is suficient charge for pairing and use.

1. If there is suficient charge, take out the earbuds from the charging case, the earbuds will be power on automatically.
   The white indicator light will light up for one second.

2. If the earbuds are power of, press both earbuds MFB button lightly to boot up, you will hear a “Power on” voice prompt.
   Note: The earbuds will enter ANC mode automatically when turned on.

Power off

1. To turn of the earbuds, long press the MFB button for 5 seconds to hear “dong-dong dong” and release, you will hear a ” Power of ” voice prompt.
   The orange indicator light will light up for one second.

2. If the charging case has suficient charge, the earbuds will automatically turn of when placed in the charging case after fully charged.

How to Pairing

Method 1

1. Take out the earbuds from the charging case, the earbuds will automatically power on and enter pairing mode with orange and white indicator lights twinkling alternately. .
2. Enable the bluetooth of your phone to search “FALCON MAX” and then click it for pairing, they will be connected.

Method 2

1. When the earbuds are not connected and in standby mode, double-tap the left or right MFB, they will enter pairing mode with orange and white indicator lights twinkling alternately.
2. Enable the bluetooth of your phone to search “FALCON MAX” and then click it for pairing, it will be connected.

Note:

1. If the earbuds are connected to one device already, put the earbuds into the charging case and take out, the earbuds will connect the device automafically;
   If the connection is unsuccessful, the earbuds will go into pairing mode automatically.

2. Disconnect the earbuds from the connected device, the earbuds will go into pairing mode automafically.

Product Overview

Reset

When the charging case has suficient charge, put your earbuds into the charging case and make sure its orange LED light is on. Then press and hold the left and right MFB for 10s and release, you will see the orange light is of and the white light is on; Then take out the earbuds from the charging case, you will notice the white light fiashing quickly, and few seconds later, the earbuds will enter pairing mode with one earbud’s white and orange lights fiashing alternatively.
(Note: When only one earbud’ s white light fiash quickly or only one earbud can be connected or the earbuds can not be used normally, you can try this reset method to restore.)
Hear-though function & ANC function

< Active Noise Cancellation (ANC) Mode>
When both earbuds are turned on, the earbuds will enter ANC mode automatically.
< Hear-through mode>
After entering ANC mode, press and hold the right MFB for 2s to hear “ dong” and release, you will hear a “Ambient Mode” voice prompt, that means hear- through mode on.
Then press and hold for 2s again to hear “ dong” and release, you will hear a “Noise canceling off” voice prompt, that means both hear-through and ANC mode are o.
Switch in the order : ANC On → Hear-through mode →Off
Note: The noise reduction function (ANC) is only available when both earbuds are used at the same time.
The LED Indicator for FALCON MAX

seconds
Pairing| White and orange LED lights flash alternatively
Reset| White LED flash quickly -orange & white LED twinkling -reset done
Power off| Orange LED light on for 1 second
Charging| Orange LED on
Full charged| Orange LED off
Battery low| Orange LED light flashes twice every second

Charging Case Button Faction

Before use, please ensure the charging case has sufficient charge, and put both earbuds into the charging case and make sure its orange LED light is on.

the charging case.
Double click| The earbuds will enter pairing mode
Press and hold for 8s| The earbuds will be reset successfully.

Note: The above functions cannot be realised when the charging case is charged.

Charging
Battery Indicator ：

Case Charging

Charging| White LED ON
Fully Charged| All LED On
Earbuds Charging
Charging| Orange LED ON
Fully Charged| Orange LED Of

Specification

Lossless/aptX Adaptive low latency
Earbuds Battery| 52mAh
Charging case Battery| 550mAh
Playing time when ANC On (60% volume at AAC code)|
Playing time when ANC Off  (60% volume at AAC code)|
Charging time of earbuds| ≤2 hours
Charging time of charging case| USB cable ：≤2 hours ；Wireless charging ：≤4 hours
Waterproof| IP54

Declarations and Warning

• Disconnect previous devices before pairing a new device.
• WARNING! Long-term exposure to high noise volumes may cause permanent hearing loss.
• Do not use the NOBLE FALCON MAX earbuds in locations prohibiting the use of electronic equipment.
• Consult your physician prior to using your NOBLE FALCON MAX earbuds if you have a pacemaker or other electrical medical device.
• This package may contain small parts, which may pose a hazard to small children.
• Do not disassemble the FALCON MAX as it contains lithium batteries, and disassembly could result in electric shock or firer serious injury.
• Any disassembly of the FALCON MAX, or attempt to replace or repair the FALCON MAX by an unauthorized person, will void the NOBLE Falcon’s warranty.
• This product is not designed for use in water, keep product away from water and liquids. Failure to do so may cause permanent damage to the product.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>