EagleStone ES80 Kids Indoor Basketball Hoop User Manual
- June 16, 2024
- EagleStone
Table of Contents
EagleStone ES80 Kids Indoor Basketball Hoop
Parts List
Product Schematic Diagram
Installation notes
The hook needs to be attached at the back of the board.
-
Fix the electric score indicator to the backboard with screws.
-
Fix the hook to the backboard with screws.
-
Insert the basketball hoop into the front groove of the backboard to fix it.
-
Paste 4 EVA shock-proof sponge strips on the 4 corners of the backboard and complete the installation.
Please note that the inflatable needle is placed at the handle, please take it and install it before use.
Air Pump Installation Instructions
-
Please take the needle out from the handle.
-
Connect the needle with the pump and tighten it clockwise.
Basketball Net Installation Instructions
Please hang the net as shown. The black net should be installed above the red.
Sticky Hook Instructions
After measuring the distance, peel off the backing film of the hook and stick them on a smooth surface.
-
Pass the net through the triangle hole.
-
Buckle the net into the top of the triangle.
-
Pull down the net to make the net buckle into the small circles of hoop.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>