Hairdryer JV01 300 Million Ionic Blow Dryer User Manual
- June 16, 2024
- Hairdryer
Table of Contents
Product Manuals
Unfold The Dimensions: 324120mm
Finished Size: 54120mm
High Speed Hair Dryer
User Manual
Product Features
High Speed Brushless Motor
- The hair dryer spins up to 110,000 rpm.
Smart Thermo-control System
- The hair dryer built in smart thermo-control system, can accurately control the air temperature to protect your hair from extreme heat damage.
Cold-Hot Air Circulation Mode
- ln any temperature mode, long press and hold the temperature control button for 2 seconds to cycle the temperature between the lowest and highest temperatures.
Hair-caring lonic Technology
- The ionic generator produces much ionic to neutralize static electricity for smooth and glossy hair.
Noise-reducing Technology
- Modulate the frequency of motor noise to a range that human ears cannot perceive. Only the sound of wind will be heard.
Functions Instruction
The instruction photo, accessories and user’s interface etc… are for reference. Your product may appear differently since upgraded. Please refer to the actual product for further information.
Speed Settings
Power/Air flow control
- Move up and down this button to shift the airflow speed.Ensure the power button is set at OFF before connecting to power.
- Press the temperature control each time,the temperature of the air outlet from the cold air to high temperature in four grades to choose, and in the indicator ring to display the light colo .
- Long press the temperature control button for 2 seconds, the temperature of the air outlet will circulate between the lowest and highest.
Parameters
Product Name : High speed hair dryer
Rated Voltage : 220V~ (refer to dryer body)
Rated Frequency :50/60Hz (refer to dryer body)
Rated Power : 1600W (refer to dryer body)
Product Dimension : 252X89X70mm (w/o cord)
Nozzle Usage
High Speed Hair Dryer
The magnetic nozzle is easily clipped on and off the device. Simply move
the concentrator close to the hair dryer iron ring, it will clip on due to the
magnetic force and can be rotated into any position.
Cleaning & Maintenance
Filter should be cleaned and maintained regularly to avoid damages,ensuring that the air inlet is always clean and clear of blockage.
- Ensure to turn off the hair dryer and unplug it before cleaning the filter cover.
- The Air inlet filter cover is held in place by a magnet. In order to remove it, hold the handle firmly and gently pull the filter cover downward.
Never wash the filter with water or any other liquid, otherwise may cause malfunctions.
- Clean the outer filter cage and inner filter with dry lint-free cloth, soft bristle brush, toothbrush.
- After cleaning, mount the filter cage back to the filter, until a soft click noise is heard.
WARNING
Usage and Storage
- Do not obstruct the air inlet when using the hair dryer,this may cause overheating and may present a fire hazard.
- Do not submerge the hair dryer into any liquid.
- Do not use the hair dryer in high humidity or high temperature environments.
- Please keep the hair dryer dry,or it may cause electric shock.
- Do not use the hair dryer with wet hands,or electric shock may occur or present a fire hazard due to short circuit.
- Do not use the hair dryer near inflammable and explosive materials,or explosion may occur or present a fire hazard due to short circuit.
- Do not wrap the wire around the hair dryer,otherwise the wire will be damaged,then electric shock may occur or present a fire hazard due to short circuit.
- Do not use the hair dryer in high humidity environments,or electric shock may occur or present a fire hazard due to short circuit.
- Do not place the hair dryer within the reach of kids and infants,or electric shock may occur.
- Do not disassemble, repair or replace any part of the hair dryer by yourself,or will be injured due to work abnormal or present a fire hazard.
- When the hair dryer is used in the bathroom,unplug it after using. It is also recommended to install a Residual Current Device(RCD)/GFCI,with a residual operating current not exceeding 30mA, in the electrical circuit supplying the bathroom.
- Do not use the hair dryer if the plug or wire is damaged or overheats,or scalded,electric shock may occur or present a fire hazard due to short circuit.
WARNING
Cautions
WARNING: Do not use the hair dryer near bathtubs, showers, basins or
other vessels containing water.
- The air outlet and nozzle are hot during usage, do not touch them before they cool down,or scalded may occur.
- Do not use the hair dryer on babies,or scalded may occur.
- When using the hair dryer in the bathroom, please unplug it after use,because it’s still dangerous when near water even if the hair dryer power is off.
- Do not unplug the hair dryer by pulling on the wire, or the wire will be damaged,electric shock may occur or present a fire hazard due to short circuit.
- Do not use the hair dryer for any other purpose than drying hair,or present a fire hazard due to short circuit.
Maintenance
- Ensure to turn off the hair dryer and unplug it before cleaning.
- Clean the outer filter cage and inner filter with towel,cotton swab or toothbrush regularly.
- Do not press or rub the air inlet and outlet with fingernails or sharp objects to avoid damaging the product.
- Do not use alcohol, nail shampoo or detergent to clean this product,as this may cause malfunction, breakage or discoloration.
- If the power cord is damaged, to avoid danger, it must be replaced by a professional staff from the manufacturer or maintenance department or other relevant department.
Troubleshooting
| Errors| Diagnostics| Solutions
---|---|---|---
Does not function when turn on| Red light ring blinking warning| Inner
components overheat| Turn off and restart after 1 min,if it does not work,
send back for repair
Inner components damaged| Send back for repair
inlet
Air outlet t l or oue
blocked| Clean air inlet and outlet
Protection programme is started| Do not turn on and off Continuously or
repeatedly
Input Voltage Error| Check the electricity supply voltage
No light indication| Power not connected| Check wire and plug
Function when turn on| Light ring PCB damaged| Send back for repair
No reaction when pressing hot wind button| Hot air button damaged
Heater gets red| Controller PCB damaged
Wire or plug overheat| wire damaged or plug loose
Smelled burnt when working| Inner components damaged
Customer service email: LJNruike@outlook.com
Scan the code to watch usage videos:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>