Shark RV1000AE Series IQ Robot Vacuum Cleaner User Guide
- June 6, 2024
- Shark
Table of Contents
QUICKSTART GUIDE
CONNECTING THE SHARKCLEAN™ APP AND ROBOT
Search SharkClean in the app store and download to get started.
SETUP
- Remove protective film from the robot and base.
- Attach the side brushes to the posts on the bottom of the robot. The side brushes are located in the red packaging.
- Turn on the power by pressing the button on the side of the robot to the (I) ON position.
Find a permanent location for the base. Place it with its back against a wall, in an area with a good Wi-Fi signal. Remove any objects that are closer than 3 ft. from either side of the base, or closer than 5 ft. from the front. For best results, set up base on the bare floor.
• Plug the base power cord into an electrical outlet.
• Turn the power switch on the back of the base to the (I) ON position.
The green power indicator light on the base will illuminate when the base has
power.
NOTE: Every time the robot returns to the base, it will make a loud noise as it empties debris. This is normal and no cause for concern. To charge, place the robot with its BACK side against the base.
- Turn power switches on BOTH robots and base to (I) ON position.
- When charging begins, the robot will beep and the BLUE charging indicator light on the base will PULSE. When the robot is fully charged, the light will turn SOLID blue.
OPTIMIZING YOUR HOME FOR CLEANING
Clear cords and remove small objects like toys, clothing, or drapes from floors. Open interior doors in rooms you want your robot to clean. For best results, run your robot in well-lit conditions.
Use the BotBoundary strip included in the box to keep your robot out of the areas you would like it to avoid:
- Near power cords or phone chargers
- In front of thresholds higher than an inch
WHAT TO EXPECT
As your robot learns your home, you may need to make some small adjustments to optimize performance.
It will take your robot multiple runs to generate your interactive map, so run it frequently to get the best map.
For a constant state of clean®, set up a cleaning schedule in the app.
While your robot is cleaning, do not pick it up and move it, or move the charging base—this will impact the robot’s ability to map your home.
During the first few weeks, your robot will empty more often than usual. Check the fill level regularly. Home environments vary, and the bin may fill up quicker in some homes.
Your robot can easily climb over most thresholds, but if one is higher than an inch, block it off with a BotBoundary® strip.
© 2021 SharkNinja Operating LLC. BOTBOUNDARY, CONSTANT STATE OF CLEAN, SHARK, SHARK IQ ROBOT, and SHARK IQ ROBOT SELF-EMPTY have registered trademarks of SharkNinja Operating LLC. SHARKCLEAN is a trademark of SharkNinja Operating LLC. APPLE, the Apple logo, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. APP STORE is a service mark of Apple Inc., registered in the U.S. and other countries. GOOGLE, GOOGLE ASSISTANT, GOOGLE PLAY, the Google Play logo, and Android are trademarks of GOOGLE LLC. RV1000AE_QSG_E_NSM_REV_Mv6
Please be sure to read the enclosed Shark®
Owner’s Guide prior to using your robot.
To stay current on our latest updates and features,
DOWNLOAD THE SHARKCLEAN ™ APP.
Search “SharkClean” in the app store.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>