BRITA 2274925 Aluna Filter Kettle Instruction Manual

June 16, 2024
BRITA

BRITA LOGO Instruction for use

2274925 Aluna Filter Kettle

| BRITA 2274925 Aluna Filter Kettle - FIGURE 2
---|---
| BRITA 2274925 Aluna Filter Kettle - FIGURE 4

BRITA 2274925 Aluna Filter Kettle - FIGURE 5

  1. Water filter exchange indicator
  2. Lid
  3. MAXTRA PRO water filter
  4. Funnel
  5. Jug / Tank
  6. Silicone sealing ring
  7. Tap spout

Hello and thank you very much for choosing BRITA.
BRITA filtered water – for you, your family and the environment!
Have fun using your new product!
All of our expert knowledge with MAXTRA PRO water filters (MAXTRA PRO Pure Performance & MAXTRA PRO Hard Water Expert):
The MAXTRA PRO with our unique BRITA MicroFlow technology:
Super-fine mesh captures coarse particles from old pipeworks and the additional high-performance filter mesh retains even the finest particles (≥ 30 µm) from tap water.
Powerful Ion-exchange pearls

  • for softer water, to protect your appliances*
  • for the reduction of metals such as lead and copper

Natural MicroCarbon from coconut shells

  • reduces odor- and taste-impairing substances such as chlorine
  • provides great-tasting, freshly filtered water*

The maximum lifespan of a MAXTRA PRO water filter is 150 litres or 4 weeks.

Optimum filter performance

Please only filter cold tap water.
Please only use BRITA water filters with tap water from municipal water treatment plants – only this meets the legal requirements for drinking water quality.
Important: store filtered water in a cool place and use within 24 hours.
Official advice for boiling tap water also applies to BRITA filtered water. The rule is: filter first, then boil!
If this advice no longer applies, please clean the jug thoroughly and insert a new water filter.
For certain groups of people (e.g. babies and people with impaired immunity) it is generally recommended that tap water should be boiled.

Highest quality & hygiene
Over 50 years of water filter experience stands for:
SEALEY VS0220 Brake and Clutch Bleeder Pneumatic Vacuum - Symbol
5 Innovation
SEALEY VS0220 Brake and Clutch Bleeder Pneumatic Vacuum - Symbol
5 the highest quality
In order to meet our high quality standards, there are strict internal and external quality controls in place.
Every MAXTRA PRO water filter undergoes treatment with hot steam for hygiene purposes during manufacture and is then packed in a protective foil. (Note: the water filter may be damp due to condensation following the steam treatment).

The filter material of the MAXTRA PRO water filter undergoes a special treatment with silver for hygiene reasons.
A small quantity of silver may be released into the water. This is in line with the recommendations of the World Health Organization (WHO).
BRITA recommends replacing the water filter regularly.
Please follow the recommended cleaning procedures and advice on preparing the filter (chapters 1 – 7).
The jug should be cleaned regularly.
Note:
If the jug is not being used for a while, remove the water filter, empty the jug and replace the water filter loosely in the empty funnel. Please refer to chapter 7 “Changing the MAXTRA PRO water filter”.

Operation – very easy

  1. Clean before the first use and every time you change the water filter
    For optimum cleaning results, turn the BRITA PerfectFit funnel upside down and flush the BRITA PerfectFit mechanism with tap water for a few seconds (excluding BRITA Flow). The jug should be cleaned before the first use and when you change the water filter – the funnel and jug are dishwasher safe (max. 50° C) or can be cleaned by hand! Please clean your BRITA Flow only by hand with cold or lukewarm water.
    Glass Jug: In general, the Glass Jug sealing rings are dishwasher proof, but we still recommend washing them by hand. Otherwise, slight discolouration may occur. Dry it thoroughly before reattaching it to the funnel.
    Lid with BRITA Smart Light  +
    Please remove the BRITA Smart Light before cleaning the lid (turn counter- clockwise).
    The BRlTA Smart Light must not be washed in the dishwasher!
    Remove the BRITA Smart Light by hand and clean with a soft, damp cloth.
    Lid with non-removable BRITA Memo
    Please clean the lid by hand, as it is not dishwasher safe!

  2. Preparing the MAXTRA PRO water filter
    Fill the clean jug with cold water.
    Immerse the water filter and shake slightly to remove any excess air.
    Remove the water filter and pour away the water in the jug. Done!

  3. Inserting the MAXTRA PRO water filter
    The BRITA PerfectFit System has been developed to create a perfect fit and seal between the MAXTRA PRO water filter and the funnel.
    Insert the funnel into the jug and place the water filter firmly in the funnel. Please push the water filter further downwards if the water does not flow through. BRITA can only guarantee optimum filtration if BRITA MAXTRA PRO water filters are used.
    The BRITA PerfectFit System is not included in BRITA Flow.

  4. Filling the BRITA water filter jug
    The water in the funnel is filtered automatically and flows into the jug.
    How the jug is filled will depend on the model or the type of lid.

  5. Activating the MAXTRA PRO water filter
    For optimal taste and performance please allow two full funnels of tap water to pass through the filter before drinking.
    To join BRITA in considering the environment, you can use this filtered water to water your plants, for example.

  6. Setting the water filter exchange indicator
    How handy! The BRITA water filter jug will tell you when you need a new water filter.
    There are different exchange indicators for this in the lid:
    BRITA Smart Light
    Its intelligent sensor not only measures the time since the water filter was last replaced, but also records the volume of filtered water.
    Before using the jug for the first time (and after every time you change the water filter), press the BRITA Smart Light reset button for approx. 5-10 seconds until the LED indicator flashes green three times.
    The jug is now ready to use.
    The flashing light indicates when you should replace the filter:

Green: The water filter is filtering optimally.
Yellow:  It will soon be time to change the water filter. Think about

purchasing a new one!
Red:| Please change the water filter!

You can check your filter status at any time by pressing briefly on the BRITA Smart Light.
BRITA Memo
Remove the protective foil before using BRITA Memo for the first time.
After activating the water filter, press and hold the „START“ button until four bars appear on the display and flash twice.
The flashing dot in the bottom right of the display unit means: “Memo in operation”.
A new water filter is required if the empty display unit flashes.

  1. Changing the MAXTRA PRO water filter
    Simply remove the water filter and follow steps 1 to 6 of the instructions.

Important information

Never place the BRITA water filter jug and the MAXTRA PRO water filter in full sun and keep away from heating elements (e.g. kettles or conventional ovens).
It is better to store them in a dark, cool and dry place (and keep new water filters in their original packaging). Store the BRITA Smart Light out of the reach of children (risk of swallowing)!
Sensitive to potassium?
Filtering initially causes a slight elevation in the potassium content of the water. This is harmless (e.g. 1 L of BRITA filtered water contains less potassium than an apple).
Please consult your doctor before using a BRITA water filter if you suffer from kidney disease or have to follow a special lowpotassium diet.
Natural traces
The BRITA activated carbon beads are of natural origin and so natural variations may occur.
A low volume of small carbon particles can get into the filtered water, which you may see as black particles.
These particles are not harmful to your health because they pass naturally through the body unchanged if swallowed.
If you discover carbon particles in your filtered water, BRITA recommends rinsing the water filter until there are no more particles visible.
Disposal and spare parts
The BRITA Smart Light and BRITA Memo use batteries (lifespan of approx. 5 years).
The exchange indicator should be removed at the end of its lifespan and disposed of properly in accordance with the statutory regulations.
BRITA Smart Light
Rotate counter-clockwise and remove from the lid.
BRITA Memo
Lift out using a screwdriver (please only remove it for the purpose of disposal).
BRITA water filter jug and water filter
Dispose of these in accordance with the local regulations.
Sustainability is important to us:
We will be happy to supply you with spare parts to extend the lifecycle of our products.
Please contact the BRITA customer services or your local distributor if you have any questions about spare parts.
Exclusion of liability
We ask for your understanding that BRITA does not accept any liability if the information in the usage instructions is not followed.
Do you have any further questions?
Then visit us on brita.net
* MAXTRA PRO Pure Performance water filter is tested in BRITA water filter systems for lead, copper, chlorine and carbonate hardness according to DIN EN 17093:2018 (limescale is certified to be reduced for 120L). And MAXTRA PRO Hard Water Expert water filter is tested in BRITA water filter systems for lead, copper, chlorine and carbonate hardness according to DIN EN 17093:2018 excluding part 6.2.3.

BRITA Polska Sp. z o.o.
Ołtarzew, ul. Domaniewska 6,
05-850 Ożarów Mazowiecki,
Polska
Tel.: +48 22 721 24 40
Faks: +48 22 721 24 49| Potten & Pannen – Staněk s.r.o.
Plynárenská 6/a
821 09 Bratislava
+421 252 632 227
www.brita.sk
www.pottenpannen.sk
---|---
Potten & Pannen –
Staněk group, a.s.
Obchodní 110
251 01 Čestlice
+420 261 227 373
www.brita.cz
www.pottenpannen.cz| ОВ СВІТ-УКРАЇНА
03067 Україна, Київ, вул.
Олекси Тихого 42А, офіс 310
+380 44 531 4313
+380 44 531 4313
Kitchen Shop SRL
Bulevardul Lacul Tei nr. 1-3,
cladirea ISPE, etaj 5, Sector 2020371, Bucuresti
0040 314.08.88.88
www.brita.ro
www.kitchenshop.ro| Kitchen Shop KFT
1134 Budapest,
Váci út 45. F. ép. 7. em.
003 614.453.975
0372.254.411
www.brita.hu
www.kitchenshop.hu
| ВРИТА ООД
ул Княз Борис I
No. 2,ет.1, офис 1
гр. Бургас 8000, България
тел: 00359 56 840401
тел/ факс: 00359 56 840967

1051605-0 1-ELA 09 / 23
IM MA XTRA PRO PL
www.register.brita.net

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals