LINEAR LNVR1-16P 16 Channel PoE+ NVR with 4TB WD Purple HDD Installation Guide
- June 16, 2024
- LINEAR
Table of Contents
Quick Installation Guide
LNVR1-08P / LNVR1-16P
LNVR1-16P 16 Channel PoE+ NVR with 4TB WD Purple HDD
Warning Before Installation
- Power off the Network Video Recorder if you detect abnormal smell or smoke coming from it.
- Do not place the Network Video Recorder around the heat sources, such as television or oven.
- Do not drop the Network Camera.
- Keep the Network Video Recorder away from water. If the Video Recorder is wet, power off immediately.
- Do not place the Network Video Recorder in high humidity environments.
- Do not attempt to remove or uninstall the software on the mounted flash memory.
- PLEASE NOTE: VIVOTEK does not provide warranty or technical support for third party application software that users additionally install and run on the NR9681.
Package Contents
-
Apply the rubber feet if NVR will sit on desk or shelf. Not required for rack mounting.
-
The NVR can support two Hard Disk Drives. It comes equipped with one HDD to add another HDD follow the below instructions.
Remove the six (6) screws that attach the top cover and slide the cover back to remove. -
If adding a second HDD, attach the SATA Data cable to the SATA2 connector on the NVR mother board.
-
Attach the SATA Power and Data cables to HDD.
-
If adding a second HDD, insert four supplied screws into the HDD (leaving them loose).
Position the HDD screws through the large end of the slotted mounting holes on the bottom of the NVR chassis, slide it over, then tighten the mounting screws.
-
Reinstall the mounting the cover and the six (6) cover screws.
-
Secure the Rack Ears to the sides of the chassis by driving three (3) included screws.
-
Secure the chassis to rack posts using two screws on each side.
-
The front side USB port supports a wired keyboard, mouse or a USB jump drive.
-
NVR ports and connections.
Please do not connect the NVR’s PoE ports to non-PD* devices (such as an Ethernet switch LAN port). The Ethernet control circuits may not be compatible.
- PD = A Powered Device designed to receive power source from a PoE connection such as network cameras.
11. Configure using the onboard software.
The NVR comes with a default IP Address of 192.168.0.240.
For initial configuration please follow the below instructions:
1. There are two ways to configure the NVR, with a direct Keyboard, Monitor & Mouse connected to the NVR or using a browser to connect to the NVR over a network.
For configuration over the network open browser to the default IP Address of 192.168.0.240
2. At initial boot up, login to the NVR with default username admin and default password linear. You will be prompted to change the password. Once created, login to NVR.
3. Login and follow the screen prompts to set, Language, Time Zone, Date and Time. Click Continue.
4. The system will automatically search and display cameras found on the network. The system will request user name and password for each camera found. Click Continue.
5. Click on Setup Gear to go to setup screen.
6. On setup menu select Globe icon to set IP Address, Subnet, Gateway and DNS appropriate for your network.
7. Navigate the other menu selections for additional setting.
8. Download User Manual from linear-solutions.com/product-manuals/
Limited Warranty
This Nice North America LLC product is warranted against defects in material
and workmanship for twenty-four (24) months. This warranty extends only to
wholesale customers who buy direct from Nice North America or through Nice
North America’s normal distribution channels. Nice North America LLC does not
warrant this product to consumers. Consumers should inquire from their selling
dealer as to the nature of the dealer’s warranty, if any.
There are no obligations or liabilities on the part of Nice North America LLC
for consequential damages arising out of or in connection with use or
performance of this product or other indirect damages with respect to loss of
property, revenue, or profit, or cost of removal, installation, or
reinstallation.
All implied warranties, including implied warranties for merchantability and
implied warranties for fitness, are valid only until the warranty expires.
This Nice North America LLC Warranty is in lieu of all other warranties
express or implied.
All products returned for warranty service require a Return Authorization
Number (RA#). Contact Nice North America Returns at
1-800-421-1587 for an RA# and other
important details.
Linear Sales
800-543-4283
Linear Service
800-421-1587
M – F, 8am – 7pm EST
Nice North America LLC
5919 Sea Otter Place, Ste. 100
Carlsbad, CA 92010
www.linear-solutions.com
Niceforyou.com
©2023 Nice North America LLC. Linear is a registered trademark
of Nice North America LLC. All rights reserved.
10030185 Rev-C
References
- Nice/Linear | Professional Access Control Company
- Nice North America - Home Automation Systems
- Nice/Linear | Professional Access Control Company
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>