Hewlett Packard Enterprise Aruba AP-534 Wireless Access Point Specifications and Datasheet

Hewlett Packard Enterprise Aruba AP-534 Wireless Access Point

JZ331A Datasheet

Overview

The Aruba 530 Series Campus Access Points with IEEE 802.11ax technology are designed to deliver extreme-performance access for mobile and IoT devices in environments where device density is very high.

Quick Specs

Figure 1 shows the appearance of JZ331A.

Table 1 shows the Quick Specs

• Product Code: JZ331A
• Form Factor: External
• Connectivity Technology: Wireless
• Data Transfer Rate: 2.4 Gbps
• Frequency Band: 2.4 GHz, 5 GHz
• Performance Maximum data rate: (2.4 GHz): 1150 Mbps ¦ Maximum data rate (5 GHz): 2.4 Gbps ¦ Aggregate
• bandwidth: 3.55 Gbps
• Interfaces: 1 x HPE Smart Rate – RJ-45 ¦ 1 x USB 2.0 – Type A ¦ 4 x antenna – RP-SMA x 4
• Antenna External: detachable

Product Details

Figure 2 shows the front panel of JZ331A.

Figure 3 shows the back panel of JZ331A

JZ331A provides these features

Unsurpassed Performance

• The Aruba 530 Series Campus Access Points with 802.11ax technology efficiently and simultaneously serves multiple clients, increasing data rates for both individual devices and as an overall system.
• Multi-user transmission with downlink and uplink Orthogonal Frequency Division Multiple Access (OFDMA) increases user data rates and reduces latency, especially for large numbers of devices with short frames or low data-rate requirements, such as voice and IoT devices.
• Multi-user capability with downlink multi-user MIMO improves network capacity by allowing multiple devices to transmit simultaneously.
• The Aruba ClientMatch technology will automatically attempt to group 802.11ax capable devices onto available AP radios with equivalent capabilities, so that the performance benefits of OFDMA are maximized. This means increased network performance and a boost in network capacity.

Smart Power Management

• The Aruba 530 Series Campus Access Points includes Aruba Intelligent Power Monitoring (IPM) which allows for a gradual upgrade of switching by allowing the APs to operate if there is not enough Power over Ethernet ( PoE) power.
• This feature enables the AP to continuously monitor and report its actual power consumption and optionally make autonomous decisions to disable certain capabilities based on the amount of power available to the unit.
• As higher-performance 802.11ax access points drive more power consumption, the Aruba NetInsight Green AP feature allows the 530 series access points to draw less power when it’s not being used, such as evenings when the buildings are empty.

IoT and Location Ready

• The Aruba 530 Series Campus Access Points provides unique benefits for IoT devices from dedicated channels in OFDMA allowing for simultaneous transmission of IoT connections with low latency, to power saving options with Target Wake Time (TWT) to saves battery life.
• The 530 series supports an integrated Bluetooth Low-Energy (BLE) and Zigbee radio, as well as a USB port for increased flexibility, providing better security and reliable connectivity for IoT devices and for implementing location services.

Compare to Similar Items

Table 2 shows the comparison of JZ331A

Data Transfer Rate

| 2.4 Gbps| 2.4 Gbps
---|---|---
Frequency Band| 2.4 GHz, 5 GHz| 2.4 GHz, 5 GHz

Performance

| Maximum data rate (2.4 GHz): 1150 Mbps ¦ Maximum data rate (5 GHz): 2.4 Gbps ¦ Aggregate bandwidth: 3.55 Gbps| Maximum data rate (2.4 GHz): 1.150 Mbps ¦ Maximum data rate (5 GHz): 2.4 Gbps ¦ Aggregate bandwidth: 3.55 Gbps

Interfaces

| 1 x HPE Smart Rate – RJ-45 ¦ 1 x USB 2.0 – Type A ¦ 4 x antenna – RP-SMA x 4| 1 x HPE Smart Rate – RJ-45 ¦ 1 x 5GBase-T – RJ-45 ¦ 1 x USB 2.0 – Type A ¦ 1 x console – micro-USB
Antenna| External detachable| Internal

Get More Information

Do you have any question about the JZ331A?

Contact us now via Live Chat or sales@router-switch.com

Specification

JZ331A specification

Internet of Things (IoT)
Internet of Things (IoT) Compatible| Yes
Communications Technology| Bluetooth Low Energy (LE), Zigbee
Networking
Form Factor| External
Connectivity Technology| Wireless
Data Transfer Rate| 2.4 Gbps
Line Coding Format| CCK, 64 QAM, 256 QAM, BPSK, QPSK, 16 QAM, OFDM, 1024 QAM, OFDMA

Data Link Protocol

| IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, Bluetooth 5.0, IEEE 802.11ax (Wi-Fi 6)
Spread Spectrum Method| OFDM, DSSS, OFDMA
Frequency Band| 2.4 GHz, 5 GHz

Performance

| Maximum data rate (2.4 GHz): 1150 Mbps ¦ Maximum data rate (5 GHz): 2.4 Gbps ¦ Aggregate bandwidth: 3.55 Gbps
Capacity| Wireless clients per Wi-Fi radio: 1024 ¦ OFDMA units: 37 ¦ BSSIDs per radio: 16
Status Indicators| System, status
Encryption Algorithm| WPA, WPA2, WPA3

Compliant Standards

| IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11g, IEEE 802.11n, IEEE 802.3at, IEEE 802.11ac, IEEE 802.3bz, IEEE 802.3bt, IEEE 802.11ax
Environmental Parameters
Min Operating Temperature| 32 °F
Max Operating Temperature| 122 °F
Humidity Range Operating| 5 – 93% (non-condensing)
---|---
General
Device Type| Wireless access point
Ruggedized Design| Indoor
Width| 9.4 in
Depth| 9.4 in
Height| 2.2 in
Expansion / Connectivity
Interfaces| 1 x HPE Smart Rate – RJ-45 ¦ 1 x USB 2.0 – Type A ¦ 4 x antenna – RP-SMA x 4
Power|
Power Over Ethernet (PoE) Supported| PoE
Antenna
Antenna| External detachable
Antenna Qty| 4
Software / System Requirements
OS Required| ArubaOS, InstantOS

Frequently Asked Questions

What is the purpose of the Aruba AP-534 (JZ331A) Wireless Access Point?

The Aruba AP-534 is designed to provide high-performance wireless access for mobile and IoT devices in environments with high device density.

What wireless standards does the Aruba AP-534 (JZ331A) support?

The Aruba AP-534 supports IEEE 802.11ax (Wi-Fi 6) technology.

What is the data transfer rate of the Aruba AP-534 (JZ331A)?

It offers a maximum data rate of 2.4 Gbps in the 5 GHz band and 1150 Mbps in the 2.4 GHz band, with an aggregate bandwidth of 3.55 Gbps.

Can you tell me about the connectivity options of this access point?

The Aruba AP-534 (JZ331A) has 1 x HPE Smart Rate RJ-45 port, 1 x USB 2.0 Type-A port, and 4 x RP-SMA detachable antennas.

Does the Aruba AP-534 support IoT devices?

Yes, it is compatible with IoT devices, including Bluetooth Low Energy (LE) and Zigbee technologies.

What is Aruba Intelligent Power Monitoring (IPM) in this access point?

Aruba IPM allows the access point to monitor its actual power consumption and make autonomous decisions to disable certain capabilities based on available power, ensuring uninterrupted operation.

How does the Aruba AP-534 (JZ331A) save power when not in use?

The Aruba NetInsight Green AP feature reduces power consumption during periods when the access point is not in use, helping to conserve energy.

Can the Aruba AP-534 (JZ331A) be used for location-based services?

Yes, it supports location-based services, thanks to its integrated Bluetooth Low Energy (BLE) and Zigbee radio.

How many wireless clients can the Aruba AP-534 (JZ331A) support per Wi-Fi radio?

It can support up to 1024 wireless clients per Wi-Fi radio.

What encryption algorithms are supported by the Aruba AP-534 (JZ331A)?

It supports encryption algorithms such as WPA, WPA2, and WPA3 for securing wireless communication.

Is the Aruba AP-534 (JZ331A) suitable for outdoor use?

No, it is designed for indoor use with a ruggedized design.

What are the dimensions of the Aruba AP-534 (JZ331A)?

The dimensions are approximately 9.4 inches in width, 9.4 inches in depth, and 2.2 inches in height.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>