nutribullet NBP-200 Triple Prep System User Guide

: June 16, 2024
: nutribullet

Table of Contents

nutribullet NBP-200 Triple Prep System
Product Information
Product Usage Instructions
Important safeguards
What’s included
Assembly guide
Control Panel
Use your Triple Prep System
- Blending
- Food Processing
Care & maintenance
One (1) Year Limited Replacement Warranty Statement
Documents / Resources

nutribullet NBP-200 Triple Prep System

Product Information

The Triple Prep System is an electrical appliance designed for blending and mixing various ingredients. It includes a blending pitcher, vented pitcher lid, cup, and extractor blade. The system is intended for household use only.

Important Safeguards

When using the Triple Prep System or any electrical appliance, always observe basic safety precautions.
Do not blend hot, warm, or carbonated ingredients in the cup as it may pressurize the contents and cause eruptions. Use the blending pitcher and vented pitcher lid for such ingredients.
Follow the recommended maintenance and care instructions mentioned in the User Guide.
Avoid heating and over-pressurizing the cup.
Do not blend for more than one minute.
Keep the appliance out of reach of children and individuals with reduced physical, sensory, or mental capabilities unless closely supervised and instructed by a responsible person.
Do not ingest apple seeds and pits of cherries, plums, peaches, and apricots as they contain a chemical that releases cyanide into the body.

Product Usage Instructions

Using the Blending Pitcher
To blend ingredients using the Triple Prep System:

Place the base ingredients in the blending pitcher.
Attach the pitcher lid securely.
Begin blending by following the instructions in the User Guide.
Once the ingredients are well mixed, twist open the vented lid cap.
Carefully pour or drop additional ingredients into the blended mixture.
If the mixture is hot or warm, open the vented lid cap slowly to avoid escaping hot steam or splattering of hot ingredients.
Always reinstall the vented lid cap when finished adding ingredients.

Disassembling and Cooling the Cup
If the cup needs to be disassembled or cooled, follow these steps:

Leave the cup where it is and do not touch it or allow others to touch it.
Do not force or pry apart the cup from the extractor blade. Contact Customer Service if unable to untwist them.
Do not continue blending.
Allow the cup to cool for at least 30 minutes.
Check if the cup is completely cooled after 30 minutes. If still warm, allow it to cool further.
If cool to the touch, slowly disengage the cup from the motor base.
With the cup pointed away from your face and body, use a towel to slowly untwist the extractor blade from the cup and release any residual pressure.
If unable to untwist the cup from the extractor blade, dispose of it properly to avoid injury in case of fermentation causing separation.

Specifications

Product: Triple Prep System
Intended Use: Household

FAQ

Where can I find additional product information?
You can find additional product information on our website at bulletbrands.co.nz or by contacting Customer Service.
Can I open the pitcher lid or spout while blending?
No, it is important to never open the pitcher lid or spout while blending. Only open the vented cap to incorporate ingredients during blending.

Important safeguards

When operating your nutribullet® Triple Prep System, remember:
SAFETY COMES FIRST. WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE OBSERVED, INCLUDING THE FOLLOWING:

WARNING!
To avoid the risk of serious injury, death, property damage, or damage to your device carefully read all instructions before operating your nutribullet® Triple Prep System. When using any electrical appliance, basic safety precautions should always be observed, including the important information in this User Guide.

If you let anyone else use your nutribullet®, make sure that they understand the health and safety information in this User Guide, as well as any additional safety or usage instructions provided. Each person using a device should completely read the User Guide to become familiar with the safe operation of the unit.

Save these instructions!
FOR HOUSEHOLD USE ONLY

WARNING!
EXTREME CAUTION should be exercised when using hot, warm, or carbonated ingredients. NEVER blend hot, warm, or carbonated ingredients in the Cup as it may pressurize the contents and may erupt upon opening, causing serious bodily injuries or damage. ONLY USE THE BLENDING PITCHER and Vented Pitcher Lid to blend hot, warm, or carbonated ingredients. Do not blend hot liquids when using CLOSED-TOP Cups.

Failure to follow all instructions regarding the use of your nutribullet® Triple Prep System may result in serious personal injury, death, or property damage. Be aware of possible hazards when using or storing your nutribullet®.

Always consult your physician regarding health and nutrition concerns and advice. The information contained in this User Guide, accompanied Recipe Guide, and/or online recipes are general suggestions and ideals, and are not meant to replace the advice of your physician.
If you are taking any medications, especially cholesterol-lowering medication, blood thinners, blood pressure drugs, tranquillizers, or antidepressants, please check with your physician before trying any of the recipes contained in the Recipe Guide or published online.
ALWAYS follow recommended maintenance and care instructions in the User Guide.

NEVER operate your nutribullet® with damaged components. If your nutribullet® malfunctions in any way, immediately discontinue use and contact Customer Service at:

AU: 1300 285 538.
NZ: 0800 232 633.

If you have any comments, questions, or concerns, please go to bulletbrands.com.au / bulletbrands.co.nz or call Customer Service.

BLENDING WITH NUTRIBULLET® CUPS

PERSONAL SAFETY
AVOID HEATING AND OVER-PRESSURIZING CUP.

NEVER blend hot or warm ingredients in the nutribullet® cups.
Starting with hot or warm ingredients allows more heat and pressure to build up when blending. This can cause the Cup to separate from the blade, potentially expelling hot ingredients and exposing the blade, both of which can cause injuries.
Only blend room-temperature or refrigerated ingredients (21°C/70°F or cooler). After blending, transfer the mixture to a stovetop pot to heat and eat.
Do not use the nutribullet® for other than its intended purpose.
Do not leave or put non-food items in any of the attachments when blending. Doing so may damage the unit or crack or shatter the attachment, resulting in bodily injury or damage.
Close supervision is necessary when any appliance is used by or near children to ensure they do not play with the appliance. Keep cord out of reach of children.
This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning the use of the appliance by a person responsible for their safety. Do not blend for more than one minute.
- Blending causes ingredients to heat up, which builds pressure in the Cup over time. Continuous blending for more than one minute may cause the Cup to separate from the blade, exposing the blade or expelling heated ingredients
- both of which can cause injury.
- Do not run consecutive blending cycles. Allow contents to settle at least 10 to 15 minutes before running another blending cycle. DO NOT attempt to open the Cup if it feels hot or warm to the touch. See the CUP CAUTION section for details.
Do not blend anything carbonated or effervescent —no bubbles.
Carbonated and effervescent ingredients (soda, baking powder, baking soda, yeast, some batters, cake mix, dry ice, or other things that become bubbly) release gasses that increase pressure within the Cup. Pressure from released gases can cause a sealed nutribullet® Cup to separate, resulting in possible injury and/or property damage. Note: Some protein powders include effervescent ingredients. Always check supplement ingredients before adding.
Do not overﬁll.
Filling above the MAX line can result in leakage. The cyclonic action of the nutribullet® requires space to extract effectively. Exceeding the MAX line can result in leakage and may create a dangerous pressurization which can cause the Cup and Extractor Blade assembly to separate, resulting in possible injury and/or property damage.
DO NOT leave blended foods inside a sealed Cup.
- Blended mixtures can spoil and ferment, increasing pressure when left in the Cup.
- Use the To-Go Lid or transfer to a vented container for storage after blending.
NEVER LEAVE THE NUTRIBULLET® UNATTENDED WHILE IT IS IN USE.
Do not place or operate your nutribullet® on uneven or unstable surfaces.
The risk of fire, shock or damage to nutribullet® during cleaning can be reduced by taking the following precautions:
- Turn off your device and unplug it before cleaning.
- Only clean the exterior of your device.
- Clean your device with a dry cloth.
Do not attempt to clean the Motor Base by immersing it in water or other cleaning liquids. Only gently wipe and dry with a clean cloth.
Do not place or operate your nutribullet® on or near a hot gas or electric burner, or in a heated oven.

WARNING!
NEVER wash your nutribullet® part or accessories using the sanitize or heat cycle of your dishwasher. Doing so can warp the part, which can create hazardous conditions during use that may result in bodily injury or property damage.

NEVER place any nutribullet® parts or accessories in the freezer or use it as a storage container in the freezer.
Make sure your nutribullet® is powered off and the motor and blades are completely stopped before removing or cleaning the unit.
Remove and safely discard any packaging material or promotional labels before using the appliance for the first time.
Periodically inspect your nutribullet® Cup for damage or wear that may impair proper function or create a safety hazard.
Do not operate if any of the parts and accessories are damaged in any manner which may impair proper function or create a safety hazard. Contact Customer Service for assistance at:
- AU: 1300 285 538 /
- NZ: 0800 232 633.
Do not use parts or accessories from other manufacturers or different models of nutribullet® or magic bullet® products. Use of parts and accessories NOT specifically designed for your nutribullet® Triple Prep System may damage your unit or cause serious injury.
Use only genuine nutribullet® attachments/accessories specifically designed for your nutribullet® Triple Prep System. Aftermarket parts are not made to nutribullet® specifications and may damage your unit or cause serious injury.
DO NOT USE OUTDOORS.
ALWAYS UNPLUG THE NUTRIBULLET® WHEN NOT IN USE.
To unplug, grasp the plug and pull from the outlet. Never pull from the power cord. Always POWER OFF and UNPLUG the unit and wait until the Blades or Discs come to a complete stop before assembling, disassembling, changing accessories, or cleaning.
The use of attachments including canning jars not recommended or sold by the manufacturer may cause fire, electric shock or injury.
Do not leave any non-food items in the Cup when blending. Remove all utensils from the Cup.
Do not blend stone fruit in this appliance unless pits/seeds have been removed. Fruit pits may damage the Cup, potentially resulting in shattering and personal injury. In addition, apple seeds and the pits of cherries, plums, peaches, and apricots contain a chemical known to release cyanide into the body when ingested.
NEVER attempt to open a sealed nutribullet® Cup if it feels hot or warm to the touch, the contents may be heated and pressurized, causing the Cup to separate with force when opened, which can result in bodily injury and burns. If the Cup feels hot or warm, take the following steps:
1. LEAVE ALONE, DO NOT OPEN. Leave the Cup where it is and do not touch it or allow others to touch it.
2. NEVER attempt to separate the Cup from the Extractor Blade by forcing or prying apart the components or applying heat, which may crack or shatter the Cup, resulting in bodily injury.
  If you are unable to untwist the Extractor Blade from the Cup, contact Customer Service.
3. DO NOT continue to blend.
4. Allow the Cup to cool for at least 30 minutes.
5. After 30 minutes, check if the Cup is completely cooled. If still warm, allow to cool more.
6. If cool to the touch, slowly disengage the Cup from the Motor Base.
7. With the Cup pointed away from your face and body, use a towel and slowly untwist the the Extractor Blade from the Cup to gently release any residual pressure.

WARNING!
If you are unable to untwist the Cup from the Extractor Blade, dispose of the Cup and contents properly so you or others will not be injured if fermentation causes the Cup and blade to separate. NEVER leave the sealed contents out for a prolonged period. The contents may ferment, causing the Cup to separate with force, which may result in bodily injury or property damage.

ALWAYS securely tighten the Extractor Blade to the Cup to prevent leakage.
Always make sure the Cup is securely locked on the Motor Base before blending. The motor will not turn on unless the Cup is set in the locked position.
Do not remove the Cup while the unit is in operation.
NEVER operate your nutribullet® Cup if empty.
Do not attempt to disengage the Cup from the Motor Base if the Cup starts to leak during blending. Leakage can indicate that the Cup is about to separate from the blade, which can expose the blade and cause laceration injuries. If you notice leaking, immediately unplug the unit and allow the motor to come to a complete stop before removing the Cup from the Motor Base.

PRODUCT SAFETY

Do not crush ice or overfill the Cup with ice. Your nutribullet® is not intended to be used as an ice crusher. Overfilling the Cup with ice may cause the ice to wedge into the blade, stopping and overheating the motor.
Always blend ice and frozen ingredients with sufficient liquid.
Always use some liquid ingredients when blending.
Cups, To-Go Lids, and other nutribullet® parts or accessories are NOT microwave-safe.
Do not use the Cup if you detect cracking, cloudiness, or other damage. You may purchase new Cups at bulletbrands.com.au /bulletbrands.co.nz or by contacting Customer Service.
Periodically inspect your Extractor Blade. If the blades do not rotate freely or if the gasket is missing or damaged, immediately discontinue use and contact Customer Service.

USING THE BLENDING PITCHER

PERSONAL SAFETY

ALWAYS affix the vented Pitcher Lid to the Blending Pitcher with the spout down and closed before blending to prevent ingredients splashing or hot ingredients from splattering, which may cause burns, bodily injuries or property damage.
Operate the Blender Pitcher with the Pitcher Lid securely locked in place and the spout closed.
After blending hot ingredients or liquids, exercise caution when opening the Pitcher Lid, being mindful of escaping hot steam or splattering hot ingredients.
Do not overfill the Blending Pitcher beyond the MAX line.

WARNING!
NEVER open the Pitcher Lid or Spout while blending. To incorporate ingredients during blending ONLY, OPEN THE VENTED CAP and carefully pour or drop ingredients into the mixture. When adding ingredients to already hot ingredients or liquids, be mindful of escaping hot steam or splattering of hot ingredients.

When using manual speeds, start blending on the LOW setting and once ingredients are integrated, adjust the speed as needed.
Proper Blending Pitcher use is important to the safe operation of your nutribullet®. Using the Blending Pitcher inconsistent with these instructions may result in bodily injury, property damage, or damage to your unit.
Before blending, check that the vent slots on the Pitcher Lid are clear and unobstructed. Clogged or obstructed vent slots will pressurize the contents which may cause hot steam or splatter on hot contents when opened.
For recipes that require certain ingredients to be incorporated during blending, first add the base ingredients, attach the Pitcher Lid, and begin blending. Once the ingredients are well mixed, twist open the vented lid cap and carefully pour or drop ingredients into the blended mixture. If the blended mixture is hot or warm, use caution and open the vented lid cap slowly, being mindful of escaping hot steam or the splattering of hot ingredients. Always reinstall the vented lid cap when finished adding ingredients.
Keep hands and utensils, other than the tamper provided, out of the container while blending to reduce the risk of severe injury to persons or damage to the blender. The cover must remain in place when using the tamper through the cover opening. A scraper may be used but must be used only when the blender is not running.
ONLY USE THE TAMPER PROVIDED with your nutribullet® to push ingredients closer to the blade. The Tamper is specifically designed not to come in contact with the blade. Keep hands and utensils, other than the tamper provided, out of the container while blending to reduce the risk of severe injury to persons or damage to the blender. The cover must remain in place when using the tamper through the cover opening. A scraper may be used but must be used only when the blender is not running.

PRODUCT SAFETY
NEVER USE spatulas, spoons, or other tools that may contact with the spinning blade. Doing so can damage the unit, shatter the Blending Pitcher, or cause severe bodily injury or property damage.

FOOD PROCESSOR SAFETY

PERSONAL SAFETY
Proper use of your Food Processor function is important for the safe operation of your nutribullet®. Using the Food Processor inconsistent with these instructions may result in bodily injury, property damage, or damage to your unit. To reduce the risk of severe injury to persons or property damage:

WARNING!
Blades and discs are sharp. Handle blades and discs carefully by the centre plastic area.

NEVER use excessive force on the Dual-Size Food Pusher to push food down the Feed Chute. This may overheat the motor or damage the Work Bowl. For best results, start your Food Processor before placing food into the Feed Chute.
NEVER put hands, fingers or utensils in the Feed Chute or Work Bowl. Only use the provided Dual-Size Food Pusher to push food down the Feed Chute.
NEVER place hands or utensils near moving Blades or Discs while processing food to reduce the risk of severe injury to persons or damage to the food processor. A scraper may be used but must be used only when the food processor is not running.
NEVER store exposed Blade attachments or Discs in the Work Bowl. Exposed Blades can present a dangerous hazard, resulting in injury. Always cover stored attachments with the Work Bowl Lid.
A scraper or spatula may be used BUT ONLY WHEN THE APPLIANCE IS POWERED OFF.
Be certain the cover is securely locked in place before operating the appliance.
Do not fill the Work Bowl above the marked maximum fill line to avoid the risk of injury due to damage to the cover or bowl.

PRODUCT SAFETY
Do not overload the Feed Chute with ingredients that may overheat the motor or damage the Work Bowl. Wait until food naturally moves down the Feed Chute and into the Work Bowl before adding more food.

GENERAL BLADE AND DISC SAFETY

PERSONAL SAFETY

WARNING!
Blades and Discs are sharp! Handle with care to avoid bodily injury. Non- food items or hard ingredients may damage the various Blades and Discs of your nutribullet®. Routinely inspect the Blades and Discs and discontinue use if damaged. Continued use with damaged Blades or Discs or use inconsistent with these instructions may result in bodily injury, property damage, or damage to your unit.

Do not touch the sharp edges of the Blades or Discs. To avoid laceration injury, do not handle or touch any sharp parts of the Blade or Disc. NEVER store exposed Blades or Discs in the Work Bowl or on the Motor Base. Exposed Blades and Discs can present the hazard of severe personal injury. Always cover exposed Blades and Discs with the Work Bowl Lid or Cup. An exposed Blade or Disc can present a laceration hazard.

Do not remove the Cup, Blending Pitcher, or Work Bowl until the Blades have come to a complete stop. Removing before the Blades come to a complete stop can cause damage to the attachments or unit.
Always POWER OFF and UNPLUG the unit and wait until the Blades or Discs come to a complete stop before assembling, disassembling, changing accessories, or cleaning.
To reduce the risk of injury, never place cutting Blades or Discs on the Motor Base without first putting the bowl properly in place.
AVOID CONTACT WITH MOVING PARTS! Do not attempt to defeat any safety interlock mechanisms. Keep hands and utensils out of and away from the Blades or Discs to reduce the risk of severe personal injury or damage to the unit.

PRODUCT SAFETY

NEVER place the Blades or Discs or any nutribullet® part or accessory on the bottom rack, or use the heat/sanitize cycle of your dishwasher when cleaning.
Periodically inspect the Blades and Discs for damage. DO NOT use any Blade or Disc if damaged and contact Customer Service.
Periodically inspect your Extractor Blade and Pitcher Blade. If the blades do not rotate freely or are damaged, immediately discontinue use and contact Customer Service. If the gasket to the Extractor Blade is missing or damaged, discontinue use and contact Customer Service. We recommend replacing the Extractor Blade every 6 months (depending on use), or as needed for optimal performance.

GENERAL PRODUCT SAFETY
Modification, improper use, and failure to follow the instructions for proper setup, use, and care of your nutribullet® Triple Prep System can increase the risk of serious personal injury, death, or property damage.

Do not use the unit in countries or locations with different electrical specifications or plug types.
Do not use the unit with a voltage converter device, as it may cause electrical shorting, fire, or electric shock resulting in personal injury or product damage.
Do not use the unit in a wet area, or anywhere it could become wet.
Do not place any nutribullet® part or accessory in a microwave, conventional oven, air fryer, or stovetop pot, or immerse in boiling water, as this will damage the part.
Do not attempt to plug the unit into an electrical outlet with wet hands.
Avoid contact with the touchscreen display when the power icon is illuminated to prevent inadvertent and unexpected operation of the unit.
Do not use the cord, plug, or Motor Base if it has been immersed in water or other liquids. Any significant spillage on, under, or around the Motor Base should be cleaned and dried before plugging in and using the unit.
Do not modify the electrical cord in any way.
Do not operate any unit with a damaged electrical cord or plug. The electrical cord and plug are not suitable for replacement. If damaged, the appliance should be replaced. Contact Customer Service for assistance at: AU: 1300 285 538/NZ: 0800 232 633.
Do not allow or place the electrical cord near or touching any hot surfaces, heat source, or flame, including the stove.
Do not allow the electrical cord to hang over the edge of a table or counter.
Do not pull, twist, or damage the power cord.
Overloading the unit may overheat the motor and engage the thermal breaker. If the internal thermal breaker shuts off the motor, unplug the Motor Base and let it cool for an hour before attempting to use it again. The thermal breaker will reset when the unit is unplugged and the thermal breaker cools down.
Always UNPLUG your nutribullet® when it is not in use, and when assembling, disassembling, changing accessories, or cleaning.
NEVER pull from the power cord to unplug. To unplug, grasp the plug and pull from the outlet.
Do not use the Blades or Discs for grinding dry ingredients such as grains, cereal, or coffee, as this may damage the motor and/or the Blades and Discs. The use of dry ingredients may cause the motor to overheat.
Do not overload the Cup, Blending Pitcher, Food Chute, or Work Bowl, as this may result in the Blades or Discs ceasing to function. If this occurs, turn off the unit, empty some of the contents, reattach, and resume.
NEVER obstruct the ventilation openings on the bottom of the Motor Base of your nutribullet® Triple Prep System. Openings on the bottom of the Motor Base should be free of dust and lint and never obstructed. Obstructing the ventilation openings may overheat the motor, presenting a fire hazard that may cause serious personal injury, death, or property damage.
ALWAYS operate the nutribullet® on a level surface, leaving unobstructed space beneath and around the Motor Base to permit proper air circulation. Slots on the bottom of the Motor Base are provided for ventilation to ensure reliable operation and to prevent the motor from overheating.
NEVER place your nutribullet® on top of flammable materials such as newspapers, tablecloths, napkins, dishtowels, placemats, or another similar types of materials.

Save these instructions!

What’s included

Product configurations may vary. To see our full list of nutribullet® accessories, please visit: bulletbrands.com.au / bulletbrands.co.nz.

Assembly guide

Control Panel

OFF/ON
The Power button controls the master power of the appliance. If the Blending Pitcher with Lid, nutribullet® Single-Serve Cup, or Processing Work Bowl is locked in place, pressing POWER will indicate the unit is powered on and illuminate the Control Panel.

TIMER

When using a Speed:
The timer starts at zero (00:00) and increases during operation, showing the time elapsed since blending began.
When using program presets:
The timer counts down during operation until the program is completed, except with the Food Processing programs of Chop and Dip, where the timer will count up.

MANUAL SPEEDS
Manual speeds can be used for continuous blending or processing using any of the attachments.

Low speed: Continuous Low-speed blending or processing.
Medium speed: Continuous Medium speed blending or processing.
High speed: Continuous High-speed blending or processing
Pulse: Use to control blending, chopping, and processing. Press and release the Pulse button to chop ingredients. Holding down will cause the Blade to run continuously. Do not hold and run Pulse continuously for more than one minute.

SINGLE-SERVE MODE
Preset programs for using Single-Serve Cups:

Dressing: Use for small-batch dressings for salads.
Frozen Drinks: Perfect for ice-blended mocktails or cocktails and frappe-style drinks.
Smoothie: Blends fresh and frozen fruits and vegetables into creamy smoothies.

BLENDER PITCHER MODE
Preset programs for using the Blending Pitcher:

Purée: Delivers a perfectly smooth texture — ideal for soups, sauces, and spreads.
Frozen Drinks: Perfect for large-batch ice-blended mocktails or cocktails and frappe-style drinks.
Smoothie: Blends fresh and frozen fruits and vegetables into creamy smoothies.
Nutmilk: Creates fresh non-dairy milks, like almond or cashew, with no straining required. See Recipe Guide for recipes.

FOOD PROCESSING MODE
Preset programs for food processing:

Chop: Use for chopping fresh ingredients like onions.
Dough: Use for mixing small batches of dough, like pizza or tortilla dough.
Dip: Great for mixing salsas and other chunky dips.

SLEEP MODE
All lighted programs and speeds will be dim in Sleep Mode, except for the Power Button and the Timer display. Once a program has completed for any of the attachments or a manual speed has been stopped, the display interface will go into Sleep Mode at the end of any program or blending speed, or after 60 seconds of inactivity. To wake the display interface up, simply tap any of the programs or speeds on the interface. Once awake, you may proceed to select any speed or program for use. To power off, press the Power Button while in Sleep Mode to turn the unit off.

This is how the display interface appears when the unit base is powered on without an attachment locked in place.

Use your Triple Prep System

Blending

nutribullet® Single-Serve Cup.

WARNING!

NEVER use the nutribullet® Cups to blend hot, warm, or carbonated ingredients. Friction from the rotating blades can cause contents to heat and pressurize, which may result in eruption upon opening. Eruption of the hot contents and exposed blade may cause serious bodily injuries or property damage.
Use only the Blender Pitcher and vented Pitcher Lid to blend your hot, warm, or carbonated ingredients.
Do not blend hot or warm ingredients in the nutribullet® Cups.
Do not blend for more than one minute.
Do not blend anything carbonated or effervescent.
Do not overfill or crush ice. Always use sufficient liquid ingredients when blending.
Do not leave blended foods in the sealed Cup.
Do not open a sealed nutribullet® Cup if it feels hot or warm to the touch.
Do not attempt to separate the Cup from the Extractor Blade by force or by prying apart components.
Do not use the Cup if you detect cracking, cloudiness, or other damage.
Do not use the Extractor Blade if the blades do not rotate freely or if the gasket is missing or damaged.

Using the nutribullet Single-Serve Cup.

Place the Motor Base on a clean, dry, and level surface.
Place ingredients into the nutribullet® Cup.
WARNING! Do not overﬁ ll! To avoid leakage, do not add ingredients beyond the MAX line.
Twist the Extractor Blade onto the Cup so it is tightly sealed.
WARNING! The Extractor Blade is sharp. Handle with care.
Plug the Motor Base’s power cord into an electrical outlet.
Flip the Cup downward and set onto the Motor Base.
Twist the Cup clockwise onto the Motor Base to lock it into place. (A “click” signals that the Cup is locked.) This will illuminate the Control Panel.
Select one of the programs for blending in the nutribullet® Cup: Frozen Drinks, Smoothie, or Dressing. Each mode will activate a preset blending cycle. You can also select Low, Medium, or High speed for your blend.
Once blending has stopped or you’ve achieved your desired consistency, twist the Cup counter-clockwise to unlock and remove it from the Motor Base. You will hear a “click” when the Cup unlocks.
NOTE: Do not use the Extractor Blade as a storage lid. Pressurization of the contents may occur due to the natural fermentation of the ingredients. Use the To-Go Lid to store.

nutribullet® Blending Pitcher

WARNING!
To prevent injuries while blending hot, warm, or carbonated ingredients, ONLY use the Blending Pitcher with the vented Pitcher Lid. NEVER use the nutribullet® Cups to blend hot, warm, or carbonated ingredients.

ALWAYS affi x the vented Pitcher Lid to the Blending Pitcher with the spout down and closed before blending to prevent ingredients splashing or hot ingredients from splattering.
CAUTION! When opening the Pitcher Lid, be mindful of escaping hot steam or the splattering of hot ingredients.
NEVER open the Pitcher Lid or Easy-Pour Spout while blending. Only use the Vented Lid Cap opening to add additional ingredients during blending. Always reinstall the Vented Lid Cap when finished adding ingredients.
Only use the Tamper (see page 16 for Tamper reference) to push ingredients closer to the blade. Never use your hand or other utensils.

Using the Blender Pitcher

Place the Motor Base on a clean, dry, and level surface.
Add ingredients to the Pitcher. Don’t exceed the MAX line.
Place the Lid on top of the Pitcher and press down to secure it in place. Place the Lid Cap over the opening, press down fi rmly, and twist until it’s locked in place.
Place the Pitcher onto the unplugged Motor Base. Twist clockwise. The Pitcher will click when locked into place.
Plug in the Motor Base. The Control Panel will illuminate with the blender menu. Select the program based on your ingredients to activate a preset blending cycle, or select the Low, Medium, or High-speed cycle.
Once blending has stopped, twist the Pitcher counter-clockwise to unlock and remove it from the Motor Base. You will hear a “click” when the Pitcher unlocks.
You can pour directly from the Pitcher by unlatching the Lid above the pour spout.
WARNING! When opening the Pitcher Lid, be mindful of escaping hot steam or the splattering of hot ingredients.
You can also press up with your thumb on the tab above the handle to remove the Lid.

Food Processing

WARNING!
Using the Food Processor inconsistent with the instructions contained in this User Guide may result in bodily injury, property damage, or damage to your unit. To reduce the risk of severe injury to persons or property damage, always keep in mind:

Blades and Discs are sharp. Handle with care by the centre plastic area.
Do not use excessive force to push food down the Feed Chute with the Food Pusher. For best results, start your Food Processor first before adding food into the Feed Chute.
Do not overload the Feed Chute. Allow food to move down the Feed Chute naturally.
NEVER put hands, fingers, or utensils inside the Feed Chute or Work Bowl.
NEVER store exposed Blade Attachments or Discs in the Work Bowl.
A scraper or spatula may be used, but only when the unit is powered off.

Using the Chopping Blade:
chop, mix, and mince food.

Place the Work Bowl on a flat, clean, and dry surface. Place the Blade Adapter atop the central shaft and push the Adapter down to secure it into place.
Place the Chopping Blade onto the Blade Adapter shaft.
WARNING! Blades and Discs are sharp. Handle with care.
Prep ingredients and add to the Work Bowl. Remove seeds, stems, and other non-edible pieces. Cut large items into 1-2 inch pieces before processing. Do not exceed the MAX line.
Place the Work Bowl onto the unplugged Motor Base. Twist clockwise. The Work Bowl will click when locked into place.
Place the Work Bowl Lid atop the Work Bowl. Twist the Lid clockwise and line up the arrows to lock into place. Insert the Food Pusher into the Lid’s Feed Chute.
NOTE: The Work Bowl Lid must be secured to the Work Bowl after the Work Bowl is secured to the Motor Base for the unit to function.
Plug in the Motor Base. The Control Panel will illuminate the food processor menu showing preset modes. Select Chop for toppings or mixes or Dip for spreads and dips.
Select and hold Pulse for manual chopping.
You can also select Low, Medium, or High for alternative preset processing speeds.
If you need to add liquid, turn the Lid’s Pusher Cap clockwise to unlock and remove the Inner Pusher. Pour liquid through the top chute (do not fi ll beyond the Work Bowl’s MAX line) and re-insert the Inner Pusher.
When finished processing, wait until the Blade stops before twisting the Work Bowl Lid counter-clockwise to unlock and remove it from the Work Bowl.
NOTE: The Work Bowl Lid must be unlocked from the Work Bowl to remove the Work Bowl from the Motor Base.
Twist the Work Bowl counter-clockwise to unlock and remove it from the Motor Base.
Carefully remove the Chopping Blade by only touching the plastic areas. Use a spoon or spatula to transfer chopped ingredients from the Work Bowl.
WARNING! Keep fingers from the Blade’s sharp edges!

Using the Dough Blade:
Combine ingredients to make dough for bread, pizza, or pie crusts.

Place the Work Bowl on a flat, clean, and dry surface. Place the Blade Adapter atop the central shaft and push the Adapter down to secure it into place.
Place the Dough Blade onto the Blade Adapter shaft.
Prep ingredients as necessary and add to the Work Bowl.
Place the Work Bowl onto the unplugged Motor Base. Twist clockwise. The Work Bowl will click when locked into place.
Place the Work Bowl Lid atop the Work Bowl. Twist the Lid clockwise and line up the arrows to lock into place. Insert the Food Pusher into the Lid’s Feed Chute.
Plug in the Motor Base. The user interface will illuminate the food processor menu. To integrate wet and dry ingredients before kneading, select and hold the Pulse setting. Pulse the mixture a few times, until ingredients are more evenly distributed.
Once the dough begins to take shape, switch the food processor to the Dough or Low setting. Do not select a higher speed, as this can overwork the dough.
Once the dough is fully kneaded, stop the machine. Wait until the Blade stops rotating before twisting the Work Bowl Lid counter-clockwise to unlock and remove it from the Work Bowl.
Twist the Work Bowl counter-clockwise to unlock and remove it from the Motor Base.
Carefully remove the Dough Blade.

Using the Reversible Slice/Shred Disc:
Slice or shred ingredients.

This Disc attachment can be placed in 2 different positions on the Blade Adaptor. The lower position is for storage, and the higher position is for use. Hold the center knob of the Disc, and carefully place it on the Blade Adaptor. Align the markings on the Disc with the markings on the Blade Adaptor, so that the lines connect. If the Disc appears to be in the lower position, remove the Disc and rotate until the markings line up and the Disc sits in the higher position.

Place the Work Bowl on a flat, clean, and dry surface. Place the Blade Adapter atop the central shaft and push the Adapter down to secure it into place.
Place the Slice/Shred Disc onto the Blade Adapter shaft.
- NOTE: The Slice/Shred Disc is reversible, with one side labelled for shredding and the other for slicing.
- WARNING! Blades and Discs are sharp. Handle with care.
Place the Work Bowl onto the unplugged Motor Base. Twist clockwise. The Work Bowl will click when locked into place.
Place the Work Bowl Lid atop the Work Bowl. Twist the Lid clockwise and line up the arrows to lock into place. Insert the Food Pusher into the Lid’s Feed Chute.
Plug in the Motor Base. The Control Panel will illuminate the food processor menu. Select the High setting.
With the motor running, twist the Food Pusher Lid Cap clockwise to unlock and remove the Inner Pusher to access the small feed chute. Or, leave the Inner Pusher in place and remove the entire Food Pusher to use the larger chute. Use the pusher to guide the ingredients into the bowl.
- WARNING! Never use fingers or utensils to push food down the Feed Chute. Only use the Food Pusher.
- WARNING! Do not force food down the Feed Chute. Use the Food Pusher to gently guide food down the Feed Chute or allow the food to move down the Chute naturally.
When finished processing, wait until the Blade stops rotating before twisting the Work Bowl Lid counter-clockwise to unlock and remove it from the Work Bowl.
Twist the Work Bowl counter-clockwise to unlock and remove it from the Motor Base.
Carefully remove the Slice/Shred Disc. Use a spoon or spatula to transfer chopped ingredients.
WARNING! Blades and Discs are sharp. Handle with care.

Care & maintenance

PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING YOUR NUTRIBULLET:

Always power off and unplug your nutribullet® when not in use or when assembling, disassembling, changing accessories, or cleaning.
Always wait until the motor comes to a complete stop before handling or removing any attachments.
Do not place any nutribullet® part, accessory, or attachment in the microwave, they are not microwave-safe.
Do not leave Blade or Discs exposed when storing. Blades and Discs are sharp, and always covered.
NEVER wash your nutribullet® part or accessory using the sanitize or heat cycle of your dishwasher. Doing so can warp the part, which can create hazardous conditions during use that may result in bodily injury or property damage.
Do not attempt to clean the Motor Base by immersing it in water or other cleaning liquids. Gently wipe and dry with a clean cloth.
Do not place any parts or accessories in a microwave, conventional oven, air fryer, or stovetop pot, or immerse in boiling water to clean or sanitize, as this will damage the part.
Make sure that the Motor Base ventilation openings are unobstructed and clean.
Periodically inspect your nutribullet® Triple Prep System components for damage or wear that may impair proper function or present a safety hazard. Never operate your nutribullet® with damaged parts or components:
- Discontinue use if you detect cracking, cloudiness, warping, or damage to the Cups, Blending Pitcher, or Work Bowl.
- Discontinue use if the Extractor Blade does not rotate freely or if the gasket is missing or damaged. Continued use with a damaged blade or use inconsistent with these instructions may result in bodily injury, property damage, or damage to your unit.
NEVER attempt to use your nutribullet® if it malfunctions or is damaged or compromised in any way. Immediately contact customer service at:
- AU: 1300 285 538 /
- NZ: 0800 232 633.
Do not use the Extractor Blade if it does not rotate freely. Depending on use, it is recommended that the Extractor Blade be replaced at least every 6 months, depending on use.
NEVER use after-market replacement parts for your nutribullet® Triple Prep System. Aftermarket parts are not made to nutribullet® specifications and may damage your unit or cause serious injury. Use only genuine nutribullet attachments/accessories specifically designed for your nutribullet® Triple Prep System. For questions concerning replacement parts, contact Customer Service at AU: 1300 285 538 / NZ: 0800 232 633 or visit: bulletbrands.com.au / bulletbrands.co.nz.

Make sure your Motor Base is powered off and unplugged from its outlet.
Detach the Cup, Pitcher, or Work Bowl from the Motor Base.
Clean the individual components as follows:
EXTRACTOR BLADES:
- Use a small brush or sponge dampened in soapy water to remove any residue from the Extractor Blade.
  NOTE: It’s best to clean the Extractor Blade immediately after use to avoid the buildup of residue.
  MOTOR BASE:
- Use a warm sponge or dishcloth dampened with soapy water to clean the surface of the Motor Base.
- Use a small brush to scrub the actuator system of the Motor Base.

OTHER ACCESSORIES:
The following components are dishwasher-safe:

Blade Adapter
Blade Attachments
Cups
Food Pusher
To-Go Lids

Rinse or scrub beforehand to remove any debris.

BLENDING PITCHER:
The Pitcher and Pitcher Lid are dishwasher-safe. if preferred, hand wash using soap and water. The blades are sharp. Take care not to touch while washing by hand

TAMPER:
Always wash the Tamper by hand with soap and water.

WORK BOWL:
The Work Bowl and Work Bowl Lid are dishwasher-safe. If preferred, hand wash using soap and water. Be sure to remove any Blade Attachments or Discs as well as the Blade Adapter before washing.

WARNING!
NEVER wash your nutribullet® part or accessory using the sanitize or heat cycle of your dishwasher. Doing so can warp the part, which can create hazardous conditions during use that may result in bodily injury or property damage.

STUCK INGREDIENTS:

To remove stubborn residue from the Cups or Extractor Blades, fill your Cup with room-temperature water to the MAX line and add 1-2 drops of dish soap.
Twist on the Extractor Blade and blend for 20-30 seconds to loosen debris enough to scrub away with soap and water.
To remove stubborn residue from the Blending Pitcher, fill halfway with water and add 1-2 drops of dish soap. Blend for 20-30 seconds to loosen debris enough to scrub away with soap and water.

STORAGE:

Always store your nutribullet® upright with nothing on top of it. Store accessories in a safe place until use.
You can store the food processor components within the Work Bowl. Place the Blade Adaptor on the centre shaft, followed by the Chopping Blade, Dough Blade, and lastly, the Slice/Shred Disc. Attach the Lid once all components are in place.
NEVER store or leave Blades or Discs exposed. Always cover with the appropriate lid or cover.

For replacement parts
Periodically inspect your nutribullet® for damage or wear. Never operate if any of the parts and accessories are damaged in any manner which may impair proper function or create a safety hazard. Contact Customer Service for assistance by visiting: bulletbrands.com.au / bulletbrands.co.nz or calling: AU: 1300 285 538/ NZ: 0800 232 633.

Use only genuine nutribullet® attachments/accessories specifically designed for your nutribullet® Triple Prep System. Aftermarket parts are not made to nutribullet® specifications and may damage your unit or cause serious injury.

One (1) Year Limited Replacement Warranty Statement

If your product becomes defective due to faulty material or workmanship within One (1) Year from the date of purchase, we warrant to do the following:

For New Zealand Consumers: We will replace the defective product with a new product, free of charge, or repair the product at our cost, at our discretion.
For Australian Consumers: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

YOUR WARRANTY IS SUBJECT TO THE FOLLOWING CONDITIONS:

DO NOT operate the appliance with a damaged plug or cord, or if the unit has been dropped, damaged or dropped in water. To avoid the risk of electric shock, do not disassemble or attempt to repair the appliance on your own. If the supply cord is damaged, it must be replaced by a qualified electrician to avoid a hazard. Incorrect re-assembly or repair can cause a risk of electric shock or injury to persons when the appliance is used.
The item has not been misused, abused, neglected, altered, modified or repaired by anyone.
The item has been subjected to fair wear and tear.
The item has not been used for trade, professional or hire purposes.
The item has not sustained damage through foreign objects, substances or accidents.

YOUR WARRANTY DOES NOT COVER:

Components that are subject to natural wear and tear caused by normal use per operating instructions.
Unauthorised/improper maintenance/handling or overload is excluded from this warranty.
For guarantee claims, you will need to submit proof of purchase in the form of a valid receipt that displays the date and place of purchase.
This warranty does not replace but is in addition to your statutory rights.
This warranty does not apply to accessories supplied with the item.
This warranty applies only to the original purchaser and may not be transferred.
Replacement items will be covered by the limited warranty for the balance of the warranty period from the date of the original purchase.

PLEASE NOTE:
Only the defective product or parts returned to the place of purchase will be replaced under this warranty.

NEW ZEALAND
PO Box 100-707 NSMC Auckland 0745 0800 232633 bulletbrands.co.nz.

AUSTRALIA
PO Box 574 South Morang Victoria 3752 1300 285538 bulletbrands.com.au.

MODEL: (NBP-200) NBKS07100
RATING: AC 220-240V 50-60Hz 1500W

nutribullet® Triple Prep System is the trademark of CapBran Holdings, LLC registered in the U.S.A. and worldwide.
Illustrations may differ from the actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.

230731_NBKS07100