nutribullet NBP50100 Food Processor 7-cup Dark Gray

Important safeguards

Warning! To avoid the risk of serious injury, carefully read all instructions before operating your nutribullet® Food Processor. When using any electrical appliance, basic safety precautions should always be observed, including the following important information.

Save these instructions!
FOR HOUSEHOLD USE ONLY

GENERAL SAFETY INFORMATION

WARNING! AVOID CONTACT WITH MOVING PARTS.
Blades and discs are sharp. Handle carefully. Do not leave the appliance unattended when in use.

• Do not overfill the bowl. Make sure to stay at or below the LIQUID MAX line when using liquid ingredients to reduce the risk of injury or damage to the machine. Overfilling the bowl can cause damage to the bowl or cover and cause the ingredients to leak.
• Always make sure the unit is properly and completely assembled before connecting to power outlet and operating. Always make sure the bowl is securely locked in place (with lid on and locked) before the motor is turned on. Do not attempt to remove the bowl or lid while the unit is in operation.
• Do not attempt to defeat the lid interlock mechanism.
• This appliance shall not be used by  children. Keep the appliance and its cordout of reach of children.
• Children shall not play with the appliance.
• Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
• Do not immerse the appliance, motor base, cord, or plug in water or any other liquid.
• Always disconnect the appliance from the power supply if it is left unattended and before assembling, disassembling or cleaning.
• Switch off the appliance and disconnect from power supply before changing accessories or handling moving parts.
• Never store the blade attachments in the bowl without the lid in place. Exposed blades can present a dangerous hazard.
• Do not use this appliance if any parts appear to be damaged. If you have any  questions or concerns, please contactcustomer service.
• Do not use outdoors.
• Never continuously operate for longer than one minute intervals. Allow at least a minute before starting another processing cycle.

FEED CHUTE

• Never push food into the feed chute with your fingers or utensils. Only use the food pusher provided. If food becomes lodged in the feed chute, ONLY use the food pusher provided to push it down. Do not place hand or fingers into the feed chute.
• Keep hands and utensils out of the feed chute and bowl and away from moving blades or discs while processing food, to reduce the risk of severe injury to persons or property damage. A scraper may be used BUT ONLY WHEN THE APPLIANCE IS OFF.
• Do not overload the feed chute with ingredients.
• When using the food pusher, never use excessive force to push food down the feed chute. Wait until food naturally moves down the feed chute and into the bowl before adding more food.

ELECTRICAL SAFETY
Do not use this product in locations with different electrical specifications or plug types. Do not operate with any type of plug adapter or voltage converter device, as these may cause electrical shorting, fire, electric shock, personal injury or product damage. This appliance has important markings on the plug blade. The cord is not suitable for replacement. If damaged, the appliance must be replaced.

• CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
• Do not modify the plug in any way.
• To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
• Do not let the power supply cord hang over the edge of a table or countertop.
• Do not let the power supply cord touch hot surfaces, including stove, or become knotted or tangled.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Regularly inspect the power cord, plug, and appliance for any damage. Do not operate any appliance with a damaged cord or plug or if the appliance malfunctions, or is dropped or damaged in any manner.

Contact Customer Service for assistance at
[email protected].

ADDITIONAL SAFEGUARDS

• Remove and safely discard any packaging material or promotional labels before using the appliance for the first time.

• Do not put any non-food items in any of the appliance pieces, as doing so may damage the unit and or cause severe personal injury or property damage.

• This appliance is not intended to be an ice crusher. Attempting to crush ice may cause permanent damage to the blades or cause the unit to malfunction, resulting in personal
  injury or property damage.

• Make sure you have removed any rind from fruit prior to adding to the bowl. Do not use fruits that contain seeds or pits unless they have been completely removed.

• Do NOT attempt to use blade, cup or bowl attachments from another nutribullet® or a magic bullet® product with the nutribullet® Food Processor. Only use the bowl and blade attachments that come with your unit.

• The use of attachments not recommended or sold by the manufacturer or distributor of Nutribullet Retail may cause personal injury or property damage.

• Ensure that the surface where the appliance operates is stable, level, clean, and dry.

• Vibration may occur during normal operation.

• Any significant spillage onto the surface under or around the appliance, or onto the appliance itself, should be cleaned and dried before continuing to use the appliance.

• When using this appliance, provide adequate air space above, below, and on all sides for circulation.

• Periodically inspect all nutribullet® components for damage or wear that may impair proper function or present an electrical hazard. Make sure that the power cord and plug are undamaged. Discontinue use and replace if you detect damage to the motor body, work bowl, or any attachments. Ensure that the blades rotate freely and that the structure is undamaged. Follow the recommended procedures in the Care and Maintenance section of this guide, and never operate your nutribullet® with damaged components.

• If your nutribullet® malfunctions in any way, immediately discontinue use and contact customer service via [email protected].

• If you have any comments, questions, or concerns, please go to info@nutribulletretail. com or [email protected].

Save these ! instructions!

What’s included

Assembly guide

Control panel

The nutribullet® Food Processor features a multispeed control panel for all types of food prep.

OFF:
Stops the Food Processor when operating on continuous LOW or HIGH speeds.

LOW:
Continuous LOW-speed chopping or mixing.

HIGH:
Continuous HIGH-speed chopping or mixing.

PULSE:
A burst of chopping or mixing that runs at HIGH speed. PULSE must be held to activate; motion will stop when the button is released.

Assembly & use

Before first use. Before using your nutribullet® Food Processor for the fi rst time, please take a moment to perform the steps below.

1. UNPACK
   Open box. Remove the Motor Base and all attachments. Place all parts on a fl at, dry surface.

2. CLEAN
   Rinse all detachable parts and accessories. All parts except the Motor Base are dishwasher safe, or can be cleaned by rinsing with warm, soapy water. Clean the Motor Base with a clean, damp cloth.

WARNING: Never submerge the Motor Base in water or any other liquid. See Care & Maintenance instructions on page 10-11 for more detailed cleaning instructions.

Assembly.
Review all warning and caution statements in the Important Safeguards section (pages 2-5) and above before proceeding to Step 1.

1. Place the Work Bowl on a clean, dry, fl at surface, like a countertop or table.
2. Place the Blade Adaptor in the Work Bowl. Lower the Blade Adaptor onto the top of the shaft located in the center of the Work Bowl. Push down so the adaptor is fi rmly and securely in place.
3. If using the Chopping Blade or Dough Blade: Hold the plastic center of the blade, and carefully place it on top of the Blade Adaptor. Slide the blade down until it reaches the bottom of the Work Bowl. Press it down fi rmly to set it in place.
   • If using a Slice/Shred disc attachment: The disc attachments can be placed in 2 diff erent positions on the Blade Adaptor. The lower position is for storage, and the higher position is for use. Hold the center knob of the disc, and carefully place it on the Blade Adaptor. Align the markings on the disc with the markings on the Blade Adaptor, so that the lines connect. If the disc appears to be in the lower position, remove the disc and rotate until the markings line up and the disc sits in the higher position.
4. If using the Spiralizer disc attachment: Align the notches on the Spiralizer Disc with the tabs that are located inside the Work Bowl towards the top. Once the disc is properly seated on the Blade Adaptor and inside of the Work Bowl, turn the Spiralizer Disc so that the ‘FRONT’ is aligned with the front of the Motor Base. The spiralizer part of the disc will sit directly under the Feed Chute.

CAUTION: Never run the motor with more than 1 blade attached.

Using the chopping blade

The Chopping Blade is a versatile blade that can be used to chop, mix, mince, or purée foods.

1. Place the Work Bowl, with the Chopping Blade attached, on a clean, dry, flat surface like a countertop. Refer to the assembly instructions on page 12 for how to properly attach the Chopping Blade.

2. Prepare food (cut into smaller pieces, remove seeds, etc.) and place into the Work Bowl. Do not overload the bowl with food. If you are using liquid ingredients do not fi ll past the LIQUID MAX line.
   NOTE: Make sure the Chopping Blade has been attached to the Work Bowl BEFORE adding food to the bowl.

3. Place the Work Bowl Lid on top of the Work Bowl. Turn the lid clockwise, lining up the arrows on the lid and handle, to lock into place. Place the Dual-Size Food Pusher into the Feed Chute.
   NOTE: The motor will not run unless the lid is locked into place.

4. Place the Work Bowl, with lid attached, onto the Motor Base. Turn the bowl clockwise to lock into place. You should hear a click when the bowl is properly locked into place.

5. Plug in the unit, then press your desired speed to start processing food. The blue light will illuminate over the speed that is currently running.

   • If you need to add liquid while processing, unlock the Inner Pusher by turning the Pusher Cap clockwise. Once unlocked, lift the Inner Pusher and drizzle liquid through the narrow chute.
     NOTE: Do not fi ll liquid ingredients past the LIQUID MAX line.

6. When you’re done, press the OFF button. Wait until the Chopping Blade has come to a complete stop. Remove the Work Bowl by turning the handle counterclockwise to unlock it from the Motor Base. Lift the bowl up off the base and set it on a flat surface.

7. Remove the Work Bowl Lid from the Work Bowl by turning the lid counterclockwise to unlock it. Carefully remove the lid and set it aside

8. Carefully remove the Chopping Blade and the Blade Adaptor from the Work Bowl and set them aside.
   CAUTION: Blades are sharp! Handle carefully. Keep fingers away from the blade’s sharp edges. Always hold blades by grasping the plastic areas.

9. Remove your food from the Work Bowl using a spatula or spoon. Dispose of any leftover food in the bowl, then clean the bowl, blades, and other parts to avoid food residue buildup.

Using the dough blade.
The Dough Blade can be used for combining ingredients to make dough for pie crusts, pizza, bread, and more!

1. Place Work Bowl, with Dough Blade attached, on a clean, dry, flat surface like a countertop. Refer to the assembly instructions on page 12 for how to properly attach the Dough Blade.

2. Prepare food, ensuring to chop ingredients like butter into small chunks, and place into the Work Bowl. Do not overload the bowl with food. If you are using liquid ingredients do not fi ll past the LIQUID MAX line.
   NOTE: Make sure the Dough Blade has been attached to the Work Bowl BEFORE adding food to the bowl.

3. Refer to the instructions on page 14 for attaching the Work Bowl Lid and the Work Bowl to the Motor Base.

4. After plugging in the unit, press your desired speed to start processing food. The blue light will illuminate over the speed that is currently running.

   • LOW: Use LOW speed for all dough making. Using a lower speed will help to avoid overworking the dough which can lead to a tough dough. If dough is cold and not overly blended, it will remain flaky.
   • PULSE: Use PULSE to cut butter into fl our before switching to LOW speed for mixing and kneading the dough.
     NOTE: We do not recommend using HIGH speed as it will over work the dough, and the dough will become tough.

5. If you need to add liquid while processing, unlock the Inner Pusher by turning the Pusher Cap clockwise. Once unlocked, lift the Inner Pusher and drizzle liquid (like ice water) through the narrow chute. Process just long enough to bring dough together in a loose ball.
   NOTE: Do not fi ll liquid ingredients past the LIQUID MAX line.

6. Refer to the instructions on page 15 for removing the Work Bowl from the Motor Base once dough has reached your desired consistency and you are done mixing.

Using a disc attachment.
The disc attachments are for slicing, shredding, or spiralizing your ingredients. The Slice/Shred Discs are reversible and labeled on either side. Place the side you want to use with its name facing up.

1. Place the Work Bowl, with disc attached, on a clean, dry, flat surface like a countertop. Refer to the assembly instructions on page 12 for how to properly attach a disc for use.

2. Place the Work Bowl Lid on top of the Work Bowl. Turn the lid clockwise, lining up the arrows on the lid and handle, to lock it into place.
   NOTE: The motor will not run unless the lid is locked in place.

3. Place the Work Bowl, with lid attached, onto the Motor Base. Turn the Work Bowl clockwise to lock in place. You should hear a click when the bowl is properly locked in place.

4. Prepare food (cut into smaller pieces, remove seeds, etc.) and set aside.
   NOTE: When using the Spiralizer Disc, cut the produce into pieces that will easily fi t in the chute. We recommend cutting foods vertically along the sides creating a ‘square’ shape for best spiralizing results.

5. Plug in the unit and press the HIGH-speed button.

6. With the motor running, place food into the Feed Chute, carefully guiding it down using the Food Pusher.
   WARNING: always use the Food Pusher, not fingers or utensils, to push food down the chute. Do not insert too much food at one time. Never force stuck food down the chute.

7. When you’re done, or when your processed ingredients have filled the work bowl, press the OFF button. Wait until the blade has come to a complete stop.

8. Remove the Work Bowl Lid from the Work Bowl by turning the lid counterclockwise to unlock it. Carefully remove the lid and set it aside.

9. Carefully remove the Disc Blade and Blade Adaptor from the bowl and set them aside.
   CAUTION: Blades are sharp! Handle carefully. Keep fingers away from the blade’s sharp edges. Always hold the blades by grasping the plastic areas.

10. Remove your food from the Work Bowl using a spatula or spoon. Dispose of any leftover food in the bowl, then clean the bowl, blades, and other parts to avoid food residue buildup.

Using the dual-size food pusher.
The Dual-Size Food Pusher features a smaller pusher inside a larger one. Use the Full-Sized Pusher for guiding bigger pieces of food down the Feed Chute — like when shredding lettuce or a big block of cheese. Unlock the Inner Pusher to create a more narrow Feed Chute, and use the Inner Pusher for better control with thinner ingredients, such as zucchini or carrots. The narrow Feed Chute is also ideal for drizzling in liquids during processing. Separate the Inner Pusher from the outer pusher piece by gripping the circular Pusher Cap. Twist the top of the pusher clockwise and lift the Inner Pusher from the outer piece.

Troubleshooting

PROBLEM
Unit does not power on.
SOLUTIONS
Make sure the Power Cord is plugged into an electrical outlet, and that outlet has power. Make sure the Work Bowl Lid is locked into place on top of the Work Bowl. The arrow on the lid and handle should line up when properly locked in place. If the lid becomes unlocked at any time while the motor is running, the unit will stop running and the blue lights around the buttons will fl ash. Make sure the Work Bowl is locked into place on the Motor Base. When placing the Work Bowl on the Motor Base, turn the handle clockwise until you hear a click – indicating that the bowl is properly locked in place.

PROBLEM
The Food Processor stopped in the middle of processing, and the control panel lights fl ashed three times.
SOLUTION
You have exceed 10 minutes of continuous running time. Unplug the Food Processor and keep the unit off for 15 minutes before continuing use.
PROBLEM
Feed Chute is blocked.
SOLUTIONS
If you notice that a piece or cluster of food appears to be stuck in the Feed Chute, blocking food fl ow, turn the motor OFF. Unlock the Work Bowl Lid from the Work Bowl, and use the Food Pusher, a spatula, or spoon to remove the stuck food before reassembling. If the Work Bowl is nearly full of food, that may stop the fl ow of food down the Feed Chute. If the food has reached to just below the disc attachment, you’ll need to empty the bowl before processing more food. Turn the motor OFF, wait until the blades have come to a complete stop and disassemble the unit to empty the Work Bowl.

Care & maintenance

Cleaning the nutribullet® Food Processor is quick and easy. All detachable parts (Blade Adaptor, Chopping Blade, Dough Blade, Slice/Shred Discs, Spiralizer Disc, Work Bowl, Work Bowl Lid, and Dual-Size Food Pusher) are TOP RACK dishwasher-safe. The Motor Base can be quickly hand-washed with a damp cloth. Read on for best practices.

• STEP 1:
  The most important thing — ALWAYS POWER OFF THE UNIT and UNPLUG the Motor Base from the power outlet when it is not in use.
  NOTE: Do not attempt to handle the appliance until all parts have stopped moving! This includes during assembly and disassembly, while changing accessories, during cleaning, and any time you leave the machine unattended

• STEP 2:
  Detach the blades and other attachments from the Motor Base.

• STEP 3:
  Clean the individual components as recommended in the following sections.

MOTOR BASE:

• To avoid risk of injury, NEVER attempt to clean the actuator system on the Motor Base while the unit is plugged in.
• Do not attempt to remove any pieces from the Motor Base.
• Use a sponge or dish cloth dampened with warm soapy water to wipe down the Motor Base until clean.
• If necessary, you may use a small brush to scrub the actuator system area to ensure it’s clean.
• To clean leakage residue from the Motor Base, wipe with a damp sponge and warm water.

WARNING: Never submerge the Motor Base in water.

ALL DETACHABLE PARTS:
WARNING: Blades are sharp! Handle all blade attachments with care when cleaning!

• The Blade Adaptor, Blade Attachments, Work Bowl, Work Bowl Lid, and Dual-Size Food Pusher are all TOP RACK dishwasher-safe. These parts may also be cleaned by hand with warm soapy water.
• We recommend cleaning all removable parts after each use to reduce the buildup of residue.

WARNING: NEVER use the sanitize cycle — heat this high can warp the plastic.
WARNING: Do not clean the Work Bowl, Work Bowl Lid, or other parts of the appliance with steel wool pads/ balls or other hard material that might scratch your Food Processor.

How to store

The blade attachments conveniently store within the Work Bowl when not in use. Make sure the unit is powered off and unplugged before placing attachments in the Work Bowl for storage. Read on for details:

NOTE: All included blades and discs will not store in the work bowl together, you will have two storage options:
OPTION 1: Chopping Blade, Dough Blade, 2 Slice/Shred Discs
OPTION 2: Chopping Blade, Dough Blade, 1 Slice/Shred Disc, Spiralizer Disc

• STEP 1:
  Place the Blade Adaptor on the center shaft.

• STEP 2:
  Lower the Chopping Blade onto Lower the Chopping Blade onto the blade shaft, and then lower the Dough Blade onto the blade shaft so that it sits above the Chopping Blade on the shaft.

• STEP 3:
  Lower the disc attachments onto the adaptor, on top of the Chopping Blade. In storage mode, the discs should sit in a lower position on the adaptor than when used in normal operation. In storage mode, the lines on the disc will NOT be aligned with the lines on the adaptor.

• STEP 4:
  The Spiralizer Disc should be the last disc stored if storing with one of the Slice/Shred Discs. When storing the Spiralizer Disc, align the notches on the Spiralizer Disc with the tabs that are located inside of the Motor Base towards the top. Ensure the disc is properly seated on the blade and adapter, inside of the Motor Base, and turn the Spiralizer Disc so that the ‘FRONT’ is aligned with the front of the Motor Base.

• STEP 5:
  Place the Work Bowl Lid onto the Work Bowl and lock into place, with the Dual- Size Pusher nestled in the Feed Chute.

NOTE: The power cord wraps under the bottom of the Motor Base – keeping it neatly tucked away when stored.

Accessories.
To order accessories, please visit our website at nutribullet. nu or neutralizing. shop.

Warranty Registration

Please visit neutralizing. shop to register your new nutribullet® Food Processor. You will be asked to enter the Serial Number of your product, along with the purchase date and name of the shop of purchase. The registration will enable us to contact you in the unlikely event of a product safety notification. By registering your product you acknowledge to have read and understood the instructions for safety and use, and the warnings set forth in the accompanying instructions.
To find the serial number, check under the Motor Base.

Are you happy with your nutribullet®?

Share your recipes, posts, tips & tricks! Like & follow us @nutribullet.nordics Tag your blends #nutribullet #nutribullet.nordics

nutrilovers #healthy #healthylifestyle

Meet the nutribullet® EveryGrain™ Cooker.

Cooking grains correctly isn’t always as easy as it seems. Knowing the right preparation, liquid-to-grain ratio, temperature, and resting technique is essential to get the texture you crave. That’s where the nutribullet® EveryGrain™ Cooker comes in, for delicious grain-based recipes for every meal — breakfast through dessert. The streamlined nutribullet® EveryGrain™ Cooker prepares all of your favourites automatically — It’s programmed to deliver perfect results, with specialized presets for white rice, brown rice, quinoa and oats, plus a catch-all “Grains”  program for more exotic types such asfarro, amarant, buckwheat, and beyond. No stovetop sweating is required and it also features a steam function for stress-free prep of veggies, fi sh, and other meal components at the same time! It’s a healthy and seriously easy way to get a great meal on the table. Buy yours now via nutriliving.shop. We trust your EveryGrain™ Cooker will become an everyday one well.

Technical specifications:

• Voltage: 220-240V
• Frequency: 50-60Hz
• Protection Class: II

Manufactured for:
nutribullet®, LLC
LOS ANGELES, CA 90025, U.S.A.
Made in CHINA

PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE.

Imported and distributed by:
nutribullet Retail • 1251 NA-11 the Netherlands
For Benelux: www.nutriliving.shop | www.nutribullet.nl
www.nutribullet.be
For Nordic countries: www.nutribullet.nu
Questions? [email protected]
Service? [email protected]
For Nordic countries: [email protected]

References

• nutribullet Benelux = De officiële nutribullet website
• nutribullet Benelux = De officiële nutribullet website
• mixers - 100% fokus pÃ¥ nutribullet & magic bullet
• TransIP - Reserved domain
• nutribullet Benelux = De officiële nutribullet website
• nutribullet Benelux = De officiële nutribullet website
• mixers - 100% fokus pÃ¥ nutribullet & magic bullet
• Nutribullet Outlet

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>