nutribullet NB100DG Pro 1000 Watt Blender User Guide

: June 3, 2024
: nutribullet

nutribullet NB100DG Pro 1000 Watt Blender User Guide nutribullet NB100DG
Pro 1000 Watt Blender 1

Important safeguards

Warning! To avoid the risk of serious injury, carefully read all instructions before operating your NutriBullet®.
When using any electrical appliance, basic safety precautions should always be observed, including the following important information.

Save these instructions!

FOR HOUSEHOLD USE ONLY

GENERAL SAFETY INFORMATION

This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
Children shall not play with the appliance.
NEVER LEAVE THE NUTRIBULLET® UNATTENDED WHILE IT IS IN USE.
DO NOT USE OUTDOORS.
ALWAYS UNPLUG THE NUTRIBULLET® WHEN NOT IN USE.
Always disconnect the appliance from the power supply if it is left unattended and before assembling, disassembling or cleaning.
Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
Do not use this appliance for anything but its intended use. Misuse may result in personal injury.

HEAT & PRESSURE SAFETY

To avoid personal injury, never blend hot ingredients or liquid in any sealed NutriBullet® cup!

WARNING!

Heated ingredients can pressurize sealed containers when agitated and cause cup and blade separation or violently expel hot contents upon opening. Always start the blending process with room temperature or refrigerated ingredients and liquids (21°C/70°F or cooler).

Never continuously operate for longer than necessary to create your recipe — generally less than one minute.
Blade friction from prolonged operation can heat ingredients and generate internal pressure in the sealed container. This pressure can cause the cup and blade to separate or blended contents to erupt from the container, resulting in possible personal injury and/or property damage. If the sealed NutriBullet® cups are warm to the touch, power off your machine and allow the vessel to cool for fifteen minutes or more. Allow contents to settle before slowly releasing the cup from the motor base. With the NutriBullet® cup pointed away from your face and body, slowly unscrew the easy-twist extractor blade to gently release any residual pressure.

If you need to blend for longer than one minute, blend for 1-minute intervals. After each 1-minute interval, allow the motor base to shut off completely and wait at least 1-minute before starting the next cycle.

Do not run for more than 3 consecutive 1-minute intervals to prevent the contents from overheating. Allow contents to settle for 2-3 minutes after the third blending cycle to prevent overheating and buildup of pressure.

Sugar in fruits and vegetables can ferment over time releasing gases that cause pressure to build up in a sealed NutriBullet® cup. Do not store any smoothies or blended mixtures in vessels sealed with the easy-twist extractor blade. If you will not consume your smoothie immediately, remove the easy- twist extractor blade and cover your NutriBullet® cup with plastic wrap before refrigerating. If your smoothie or blended mixture was made in the pitcher, transfer to another storage container before refrigerating. Never store any blended mixture in a sealed cup unrefrigerated, or for any prolonged period of time; contents will spoil and ferment, producing gases that might cause eruption.

Never blend carbonated liquids, reactive, or effervescing ingredients (e.g., baking soda, baking powder, vinegar, citric acid, yeast, etc.). Pressure from released gases can cause a sealed blending container to burst or separate, resulting in possible injury and/or property damage.

If the NutriBullet® blends for longer than one minute, friction from the blades can cause ingredients to heat and generate internal pressure inside the vessel. If a blending vessel becomes warm to the touch, turn off the machine and allow the vessel to cool completely before carefully opening, pointed away from your body to avoid injury.

Caution must be observed if hot liquid is poured into the blender as it can be ejected out of the appliance due to sudden steaming.

BLADE SAFETY

Never store any easy-twist extractor blade in the motor base unattached to a NutriBullet® cup. An exposed blade can present a laceration hazard.

WARNING!

Blades are sharp! Handle carefully. Use care when handling any blade. To avoid laceration injury, do not handle or touch any blade edge.

Caution must be observed when emptying vessels and during cleaning.

AVOID CONTACT WITH MOVING PARTS! Keep hands and utensils out of and away from blades while blending food to reduce the risk of severe personal injury.

TO REDUCE THE RISK OF PERSONAL INJURY OR PROPERTY DAMAGE, make sure the easy-twist extractor blade is securely twisted (hand-tightened) onto the NutriBullet® cup before placing it on the motor base and operating the NutriBullet PRO® 1000. Check to make sure the easy-twist extractor blade is aligned properly before placing it on the motor base and operating your NutriBullet PRO® 1000.
After blending, wait to remove the NutriBullet® cup and easy-twist extractor blade assembly from the motor base until the motor comes to a full stop and the unit powers down completely. Taking the blending vessel off the unit prior to complete power down can cause damage to the easy-twist extractor blade coupling or motor gear.

Never use the NutriBullet PRO® 1000 without adding liquid, as doing so may damage the blades.

The cyclonic action® of your NutriBullet PRO® 1000 requires the use of liquids to make smoothies and other nutritious items. The NutriBullet PRO® 1000 is not intended to be used without liquids, or as an ice crusher.

ALWAYS ADD LIQUID to your recipe.

DO NOT USE the easy-twist extractor blade for grinding dry ingredients such as grains, cereal, or coffee, as this may damage the motor and/or the easy-twist extractor blade.
We recommend replacing your easy-twist extractor blade every 6 months (depending on use) or as needed for optimal performance.

ELECTRICAL SAFETY

WARNING!

Do not use this product in locations with different electrical specifications or plug types. Do not operate with any type of plug adapter or voltage converter device, as these may cause electrical shorting, fire, electric shock, personal injury, or product damage.

The use of attachments, including canning jars, is not recommended and may cause fire, electric shock, personal injury, or product damage and will void the product’s warranty.
To avoid the risk of electric shock, never immerse the cord, plug, or motor base of the NutriBullet PRO® 1000 in water or other liquids. Discontinue use if the cord, plug, or motor base is damaged.
Always POWER OFF by UNPLUGING the NutriBullet PRO® 1000 when it is not in use or BEFORE assembling, disassembling, changing accessories, or cleaning. Do not attempt to handle the NutriBullet PRO® 1000 until all parts have stopped moving and unit has powered down.
Do not allow the cord to hang over the edge of the table or counter. Do not pull, twist, or damage the power cord. Do not allow the cord to touch hot surfaces, including the stove.
If the motor stops working, unplug the motor base and let it cool for at least 15 minutes before attempting to use it again. Your NutriBullet PRO® 1000 has an internal thermal breaker that shuts off the motor when it overheats. The thermal breaker will reset when the unit is unplugged and the thermal breaker cools down sufficiently.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

WARNING!

CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

STOVE-TOP HEATING SAFETY

Do not blend hot ingredients in any sealed NutriBullet® cup!

WARNING!

To heat items that have been blended at room temperature or cooler (21°C/70°F or less), transfer mixture to a stovetop pot to heat. Use a thermometer to test the internal temperature of cooked ingredients; they may feel cool to the touch, yet still be hot inside.

The NutriBullet PRO® 1000 is not intended for use on the stove top. Do not place the motor base or any NutriBullet® accessory on the stove, in the microwave, or immerse in boiling water. This may result in damage to the accessory.

VENTILATION WARNINGS

To prevent a fire hazard, power base openings (underneath the motor base) should be free of dust and lint and never obstructed with flammable materials such as newspapers, tablecloths, napkins, dishtowels, place mats, or other similar type of materials.

CAUTION! Always operate the NutriBullet PRO® 1000 on a level surface, leaving unobstructed space beneath and around the motor base to permit proper air circulation. Vents on the bottom of the product are provided for ventilation to ensure reliable motor operation and to prevent overheating.

MEDICAL SAFETY

The information contained in this User Guide or Recipe Guide is not meant to replace the advice of your physician. Always consult your physician regarding health and nutrition concerns.

MEDICATION INTERACTIONS:

If you are taking any medication, especially cholesterol-lowering medication, blood thinners, blood pressure drugs, tranquilizers, or antidepressants, please check with your physician before trying any of the recipes contained in this User Guide or the Recipe Guide.
Avoid blending the following seeds and pits in the NutriBullet PRO® 1000 as they contain a chemical known to release cyanide into the body when ingested: apple seeds, cherry pits, plum pits, peach pits, and apricot pits. Fruit pits may also cause damage to the cups.

ADDITIONAL INSTRUCTIONS FOR PROPER USAGE

Do not place any of the NutriBullet PRO® 1000 parts in a microwave, oven, in a stovetop pot, or immerse in boiling water as this may result in damage to the part.
TO AVOID LEAKAGE DO NOT OVERFILL THE BLENDING CUPS! When filling the blending vessel make sure your ingredients do not exceed the MAX line. Exceeding the indicated MAX line can result in leakage and may lead to dangerous pressurization.
Blending vessels and easy-twist extractor blades are specific to the exact model of NutriBullet PRO® 1000 you possess. Use of incompatible parts (parts from other models) may result in damage to your NutriBullet PRO® 1000 or create safety hazards. When ordering replacement parts (NutriBullet® cups, pitcher, easy-twist extractor blades) on nutribullet.com or via customer service, please specify the machine model to ensure you receive parts that are compatible with your unit.
Periodically inspect all NutriBullet PRO® 1000 components for damage or wear that may impair proper function or present an electrical hazard. Make sure that the power cord and plug are undamaged. Discontinue use and replace blending vessels if you detect cracking, cloudiness, or damage to the plastic. Ensure that the blades rotate freely and that the structure is undamaged. Make sure that the motor base is unobstructed and clean. Follow maintenance recommended in the User Guide and never operate your NutriBullet PRO® 1000 with damaged components.

If your NutriBullet PRO® 1000 malfunctions in any way, immediately discontinue use and contact Customer Service. You may purchase new NutriBullet® cups and easy-twist extractor blades at nutribullet.com or by contacting Customer Service.

Save these instructions!

If you have any comments, questions, or concerns, please go to nutribullet.com.

PRO® 1000

nutribullet NB100DG Pro 1000 Watt Blender 2

Thank you for purchasing the NutriBullet PRO® 1000.

What’s included.

motor base 900mL cup 700mL cup

easy-twist extractor blade 2 to-go lids

Assembly guide.

NB100DG Pro - Assembly

NutriBullet® cup
easy-twist extractor blade
motor base
suction cup feet

NutriBullet® cup assembly & use.

PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE:

Make sure the base is plugged in for use.
Handle the easy-twist extractor blade assembly with care as the blades are sharp.
Never run the appliance while empty.
Appliance accessories are not intended to be used in the microwave as it may damage the accessories.
Never leave the appliance unattended while in use.

Never blend hot ingredients when using any sealed NutriBullet® cups.

WARNING!

Heated ingredients can pressurize sealed containers when agitated and violently expel hot contents upon opening. Always start the blending process with room temperature or refrigerated ingredients and liquids (21°C/70°F or cooler).

1 Review all warning and caution statements in the Important Safeguards section (pg. 2-7) before proceeding to Step 2.

2 Place the motor base on a clean, dry, level surface such as a counter or table.

3
Add ingredients to the NutriBullet® cup.

NOTE: Do not overfill! To avoid leakage, do not add ingredients beyond the MAX line.

4 NB100DG Pro - Cup assembly & use 2
Twist the easy-twist extractor blade onto the cup until tightly sealed.

5 NB100DG Pro - Cup assembly & use 3
Plug the power cord into an electrical outlet.

6 NB100DG Pro - Cup assembly & use 4
Turn the cup upside down and place it onto the motor base, gently turning the cup clockwise to lock into the motor base. This will activate the extraction cycle.

7 The extraction cycle will automatically run for 1 minute. If you’d like to stop extracting before the cycle is over, proceed to step 8.

8 NB100DG Pro - Cup assembly & use 5
Unlock the assembly by gently twisting the cup counterclockwise. You will hear a click. Enjoy!

NOTE: Blending should not require longer than one minute to yield smooth and creamy results.

CAUTION
Do not remove the easy-twist extractor blade from the NutriBullet® cup until blending has completely ceased. Do not use the easy-twist extractor blade as a storage lid for your cup. Some foods may contain active ingredients or release gases that will expand if left in a sealed container, resulting in excessive pressure buildup that can pose a risk of injury. When storing contents in the cup, use plastic wrap or foil to seal your container. Always point contents away from your body when unsealing.

Care & maintenance.

Cleaning the NutriBullet® is easy. The cups, lids, and blades are TOP RACK dishwasher-safe. Motor base can be quickly hand-washed with soap and water. Read on for best practices.

Please follow the below cleaning instructions before the first use, and after each use. Cleaning the NutriBullet® Pro 1000 is easy.

Here’s how to clean the NutriBullet®:

STEP 1:

The most important thing — ALWAYS POWER OFF THE UNIT and UNPLUG the motor base from the power outlet when it is not in use. Do not attempt to handle the appliance until all parts have stopped moving! This includes during assembly and disassembly, while changing accessories during cleaning, and any time you leave the machine unattended.

STEP 2:

Detach the NutriBullet® cup and easy-twist extractor blade from the motor base.

STEP 3:

Clean the individual components (motor base, easy-twist extractor blade, NutriBullet® cups) as recommended in the this section.

MOTOR BASE:

To avoid risk of injury NEVER attempt to clean the actuator system on the motor base while the NutriBullet PRO® 1000 is plugged in.
Do not attempt to remove any pieces from the motor base.
Use a sponge or dish cloth dampened with warm soapy water to wipe down the motor base until clean.
If necessary, you may use a small brush to scrub the actuator system area to ensure it’s clean.
To clean leakage residue from the motor base, wipe with a damp sponge and warm water.

WARNING: Never submerge the motor base in water.

EASY-TWIST EXTRACTOR BLADE:

Blades are sharp! Handle the easy-twist extractor blade with care when cleaning! Blades are TOP RACK dishwasher-safe. It is best to clean blades immediately after use to reduce buildup of residue. If food particles get stuck, use a small brush or sponge to target and dislodge them.
Do not remove any components of the easy-twist extractor blade; this can result in permanent damage to the blade, resulting in leakage when blending. If, over time, the easy-twist extractor blade becomes loose or damaged, you may order a new easy-twist extractor blade at nutribullet.com or contact Customer Service.
Dry the easy-twist extractor blade completely after every use.
Regularly check the condition of the bottom of the blade for cracking or breakage. If damaged, replace easy-twist extractor blade immediately to prevent possible personal injury.

NUTRIBULLET® CUPS & TO-GO LIDS:

These items are TOP RACK dishwasher-safe. We recommend rinsing and briefly scrubbing them with a dish brush to remove any remaining debris before placing in the dishwasher. NEVER use the sanitize cycle to wash the cups — heat this high can warp the plastic.

Stubborn clean up:

If ingredients get stuck to the NutriBullet® cups or easy-twist extractor blades, here’s an easy cleanup solution: fill the vessel with room temperature (21°C/70°F or less) water to its MAX line and add 1-2 drops of dish soap. Twist on the easy-twist extractor blade and blend on the motor base for 20-30 seconds. This should loosen the debris enough to scrub it away with soap and water.

How to store:

Store the NutriBullet PRO® 1000 upright. Do not place anything on top of it. Store remaining pieces in a safe place where they will not be damaged and won’t cause harm.

WARNING: NEVER store the easy-twist extractor blade on the motor base without a NutriBullet® cup as the exposed blades pose a serious laceration hazard.

Replacement parts.

To order additional parts and accessories, please visit our website at nutribullet.com or feel free to contact Customer Service.

Explanation of the markings

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal; recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

NB100DG Pro - Symbol This product complies with the European regulation no. 1935/2004 on materials and articles intended to come into contact with food.

The 1000 watt rating of this appliance was obtained by using the 32oz Cup with Blade Holder Assembly and 100g of beef with tendon at max speed for 15 seconds.

Illustrations may differ from the actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.

210723_NB93100