COMMSCOPE MP-PP Series Co Location Mounts Installation Guide
- June 16, 2024
- CommScope
Table of Contents
- COMMSCOPE MP-PP Series Co Location Mounts
- Product Information
- Product Usage Instructions
- MP-PP13M SERIES FLATFORM FOR INSTALLATION
- MP-PP15M SERIES FLATFORM FOR INSTALLATION
- COMPONENTS FOR INSTALLATION
- COMPONENTS FOR INSTALLATION
- COMPONENTS FOR INSTALLATION
- COMPONENTS FOR INSTALLATION
- COMPONENTS FOR INSTALLATION
- COMPONENTS FOR INSTALLATION
- ANTENNA SPACING SHOWN
- OPTIONAL ACCESSORIES
- FAQ (Frequently Asked Questions)
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
COMMSCOPE MP-PP Series Co Location Mounts
Product Information
Specifications:
- Manufacturer: CommScope, Inc. of North Carolina
- Model: MP-PP13M-12C-96 (Shown for reference, see Table 1 for all configurations)
- Dimensions: 156.0 inches (height), 42.0 inches (width), 96 inches (length)
- Weight: 1786.7 lbs
- EPA: 29.99 ft^2
- Material: MP-PP (Monopole Antenna Pipe)
Product Usage Instructions
1.0 General Notes
All metric dimensions are in brackets [X.X]. For patent
information, please visit https://www.cs-pat.com.
2.0 Design Notes
Prior to installing the appurtenance, identify any hazards or obstructions to the climbing facility and safety climb. Additional products may be required to maintain the integrity of the safety climb. During installation, temporary and/or permanent precautionary measures should be taken to preserve the climbing facility and/or safety climb.
The product fits monopoles with an outer diameter (O.D.) of 15-45 inches.
Antenna pipes should be centered and evenly spaced.
Position the mount or adjust the safety climb cable so as not to hinder,
damage, or obstruct the safety climb. The safety cable routing bracket may be
purchased separately.
3.0 Manufacturing/Special Requirements
Tighten all bolts securing flat plates by the turn-of-nut method. Tighten all U-bolts using the turn-of-nut method, with attention to leave equal distance and equal force on each leg of the U-bolt. All fasteners should be tightened per AISC 6.5.2.
4.0 Test
No specific test instructions are provided in the user manual.
5.0 Packaging
The packaging should meet CommScope requirements per document IS-PL-3005. The printed document should be placed inside a polybag and then in the shipping container. Extra hardware may be supplied, bagged, and shipped.
REVISIONS
REV.| DESCRIPTION| DATE| APPROVED
A| INITIAL RELEASE| JL1183 24OCT23| CB1094 40181861CMO
MP-PP13M-12C-96 SHOWN FOR REFERENCE
(SEE TABLE 1 FOR ALL CONFIGURATIONS)
PART NUMBERS, WEIGHTS, & EPA
- (EPA)A DOES NOT INCLUDE ANTENNA PIPES AND MOUNTING HARDWARE. IF DESIRED, ADD ANTENNA PIPE PER TABLE 2
TABLE 2: EPA OF EACH ANTENNA PIPE
ANTENNA PIPE| (EPA)A (FT^2)| (EPA)A W/ 1/2″ ICE THICKNESS (FT^2)
2-7/8″ X 96″| 1.84| 2.48
2-7/8″ X126″| 2.42| 3.26
NOTE:
1. ANTENNA PIPES ARE CONSIDERED SEPARATELY.
2. KA FACTOR OF 3-SECTOR EPA INCLUDED.
3. COMBINE THE ASSOCIATED EPA VALUES IN THE TABLES ABOVE TO DETERMINE THE EPA
OF A MOUNT MODEL WITH A LISTED MOUNT PIPE CONFIGURATION.
FOR EXAMPLE, MP-PP13M-12C-96 HAS A 3-SECTOR EPA OF 29.99 FT2 WITH NO ICE PLUS
12 ANTENNA PIPES WITH A 3-SECTOR EPA OF 12X1.84=22.08 FT2 WITH NO ICE.
SO, THE TOTAL EPA OF 52.07 FT2 FOR THE MP-PP13M-12C-96
MP-PP13M SERIES FLATFORM FOR INSTALLATION
ADJUST THE INSTALLATION DISTANCE ACCORDING TO THE DIAMETER OF THE MONOPOLE
WHEN INSTALL PLATFORM MC-AS-4000-00.
SEE TABLE 3 DETAIL FOR THE DISTANCE ADJUSTED.
DETAIL X
SCALE 1 : 8
TABLE 3: PLATFORM INSTALLATION POSITION
DIAMETER OF MONOPOLE (INCH)| DISATNCE (INCH)| DIAMETER OF MONOPOLE (MM)|
DISATNCE (MM)
15| 36.89| 381.0| 937.0
17.5| 35.62| 444.5| 904.7
20| 34.34| 508.0| 872.2
---|---|---|---
22.5| 33.07| 571.5| 840.0
---|---|---|---
25| 31.79| 635.0| 807.5
27.5| 30.52| 698.5| 775.2
30| 29.24| 762.0| 742.7
32.5| 27.97| 825.5| 710.4
35| 26.70| 889.0| 678.2
37.5| 25.42| 952.5| 645.7
40| 24.15| 1016.0| 613.4
42.5| 22.87| 1079.5| 580.9
45| 21.60| 1143.0| 548.6
NOTE: FOR MONOPOLE DIAMETERS THAT ARE NOT IN THE TABLE, USE BELOW FORMULA TO GET THE VALUE OF THE ADJUSTMENT: DISTANCE OF ADJUSTMENT = 44.54- 0.51*D (INCH), WHERE D(INCH) IS THE DIAMETER OF MONOPOLE
MP-PP13M-12C-96 SHOWN FOR REFERENCE
(SEE TABLE 1 FOR ALL CONFIGURATIONS)
MP-PP15M SERIES FLATFORM FOR INSTALLATION
ADJUST THE INSTALLATION DISTANCE ACCORDING TO THE DIAMETER OF THE MONOPOLE
WHEN INSTALL PLATFORM MC-AS-7000-00.
SEE TABLE 4 DETAIL FOR THE DISTANCE ADJUSTED.
TABLE 4: PLATFORM INSTALLATION POSITION
DIAMETER OF MONOPOLE (INCH)| DISATNCE (INCH)| DIAMETER OF MONOPOLE (MM)|
DISATNCE (MM)
15| 25.40| 381.0| 645.2
17.5| 24.13| 444.5| 612.9
20| 22.85| 508.0| 580.4
---|---|---|---
22.5| 21.58| 571.5| 548.1
---|---|---|---
25| 20.30| 635.0| 515.6
27.5| 19.03| 698.5| 483.4
30| 17.75| 762.0| 450.9
---|---|---|---
32.5| 16.48| 825.5| 418.6
---|---|---|---
35| 15.21| 889.0| 386.3
37.5| 13.93| 952.5| 353.8
40| 12.66| 1016.0| 321.6
---|---|---|---
42.5| 11.38| 1079.5| 289.1
45| 10.11| 1143.0| 256.8
NOTE: FOR MONOPOLE DIAMETERS THAT ARE NOT IN THE TABLE, USE BELOW FORMULA TO GET THE VALUE OF THE ADJUSTMENT: DISTANCE OF ADJUSTMENT = 33.05- 0.51*D (INCH), WHERE D(INCH) IS THE DIAMETER OF MONOPOLE
MP-PP15M-12C-96 SHOWN FOR REFERENCE
(SEE TABLE 1 FOR ALL CONFIGURATIONS)
COMPONENTS FOR INSTALLATION
MP-PP13M-B SHOWN
COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES;
INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.
ITEM NO. | PART NUMBER | DESCRIPTION | QTY. | WEIGHT |
---|---|---|---|---|
1 | MC-RMHD-1245-3 | 3 SECTOR RING MOUNT, 12″-45″ POLE | 1 | 329.19 LBS |
2 | MC-AS-4000-00 | WELDMENT, CO-LOCATION PLATFORM DECK | 3 | 142.23 LBS |
3 | MC-AS-5000-00 | WELDMENT, MONO PLATF SPINDLE | 3 | 101.74 LBS |
4 | MC-AS-6100-00 | WELDMENT, MINI KICKER BRACKET | 3 | 14.77 LBS |
5 | RK48-00 | MINI KICKER ARM SUPPORT TUBE 48″ | 3 | 22.96 LBS |
6 | MTC323704 | CLAMP BAR | 6 | 2.37 LBS |
7 | RK02 | CONNECTION BRACKET | 6 | 1.21 LBS |
8 | GB-0550A | 5/8″ X 5″ GALV BOLT KIT (A325) | 6 | 0.52 LBS |
--- | --- | --- | --- | --- |
9 | MT-381-10 | 5/8″ X 10″ GALV THREADED ROD | 6 | 0.86 LBS |
10 | GWF-05 | 5/8″ GALV FLAT WASHER, 1.7OD | 39 | 0.06 LBS |
11 | GB-0522A | 5/8″ X 2-1/4″ GALV BOLT KIT (A325) | 27 | 0.28 LBS |
12 | MC-AS-1200-00 | CLAMP PLATE, CO-LOCATION PLATFORM | 6 | 2.93 LBS |
--- | --- | --- | --- | --- |
13 | 9615-14 | BOLT,CARRIAGE,5/8-11,8.5,STL GALV | 12 | 0.82 LBS |
14 | GWL-05 | 5/8″ GALV LOCK WASHER | 24 | 0.03 LBS |
15 | GN-05 | 5/8″ GALV HEX NUT | 24 | 0.08 LBS |
16 | GB-05125 | 5/8″ X 1-1/4″ GALV BOLT KIT | 3 | 0.20 LBS |
17 | GUB-4355 | 1/2″ X 3-5/8″ X 5″ GALV U-BOLT | 12 | 0.71 LBS |
18 | MT546156 | 2.875″ O.D. X 156″ PIPE | 6 | 75.58 LBS |
19 | GUB-4352 | 1/2″ X 3″ X 5-1/4″ GALV U-BOLT | 12 | 0.71 LBS |
--- | --- | --- | --- | --- |
20 | MC-AS-6200-00 | CORNER WELDMEMT, HANDRAIL | 3 | 23.91 LBS |
--- | --- | --- | --- | --- |
![SECTION H-H
SCALE 1 : 6](https://manuals.plus/wp-content/uploads/2024/01/COMMSCOPE-MP-PP- Series-Co-Location-Mounts_15.png)
![DETAIL F
SCALE 1 : 4](https://manuals.plus/wp-content/uploads/2024/01/COMMSCOPE-MP-PP- Series-Co-Location-Mounts_16.png)
COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES;
INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.
COMPONENTS FOR INSTALLATION
MP-PP13M-12C-126 SHOWN
![DETAIL J
SCALE 1 : 4](https://manuals.plus/wp-content/uploads/2024/01/COMMSCOPE-MP-PP- Series-Co-Location-Mounts_18.png)
INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.
COMPONENTS FOR INSTALLATION
MP-PP15M-B SHOWN
COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES;
INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.
![DETAIL N
SCALE 1 : 6](https://manuals.plus/wp-content/uploads/2024/01/COMMSCOPE-MP-PP- Series-Co-Location-Mounts_23-1.png)
![DETAIL N
SCALE 1 : 6](https://manuals.plus/wp-content/uploads/2024/01/COMMSCOPE-MP-PP- Series-Co-Location-Mounts_25.png)
COMPONENTS FOR INSTALLATION
MP-PP15M-12C-96 SHOWN
![DETAIL R
SCALE 1 : 4](https://manuals.plus/wp-content/uploads/2024/01/COMMSCOPE-MP-PP- Series-Co-Location-Mounts_26.png)
COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES;
INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.
ITEM NO. | PART NUMBER | DESCRIPTION | QTY. | WEIGHT |
---|---|---|---|---|
1 | MC-RMHD-1245-3 | 3 SECTOR RING MOUNT, 12″-45″ POLE | 1 | 329.19 LBS |
2 | MC-AS-7000-00 | WELDMENT,CO-LOCATION PLATFORM DECK | 3 | 208.07 LBS |
3 | MC-AS-5000-00 | WELDMENT, MONO PLATF SPINDLE | 3 | 101.74 LBS |
4 | MC-AS-6100-00 | WELDMENT, MINI KICKER BRACKET | 3 | 14.77 LBS |
--- | --- | --- | --- | --- |
5 | RK48-00 | MINI KICKER ARM SUPPORT TUBE 48″ | 3 | 22.96 LBS |
6 | MTC323704 | CLAMP BAR | 6 | 2.37 LBS |
7 | RK02 | CONNECTION BRACKET | 6 | 1.21 LBS |
8 | GB-0550A | 5/8″ X 5″ GALV BOLT KIT (A325) | 6 | 0.52 LBS |
9 | MT-381-10 | 5/8″ X 10″ GALV THREADED ROD | 6 | 0.86 LBS |
10 | GWF-05 | 5/8″ GALV FLAT WASHER, 1.7OD | 39 | 0.06 LBS |
11 | GB-0522A | 5/8″ X 2-1/4″ GALV BOLT KIT (A325) | 27 | 0.28 LBS |
12 | MC-AS-1200-00 | CLAMP PLATE, CO-LOCATION PLATFORM | 6 | 2.93 LBS |
13 | 9615-14 | BOLT,CARRIAGE,5/8-11,8.5,STL GALV | 12 | 0.82 LBS |
14 | GWL-05 | 5/8″ GALV LOCK WASHER | 24 | 0.03 LBS |
15 | GN-05 | 5/8″ GALV HEX NUT | 24 | 0.08 LBS |
16 | GB-05125 | 5/8″ X 1-1/4″ GALV BOLT KIT | 3 | 0.20 LBS |
17 | GUB-4355 | 1/2″ X 3-5/8″ X 5″ GALV U-BOLT | 12 | 0.71 LBS |
18 | MT546180 | 2.875″ O.D. X 180″ PIPE | 6 | 87.21 LBS |
19 | GUB-4352 | 1/2″ X 3″ X 5-1/4″ GALV U-BOLT | 12 | 0.71 LBS |
20 | MC-AS-6300-00 | CORNER WELDMEMT, HANDRAIL | 3 | 31.87 LBS |
21 | XP-2525 | CROSSOVER PLATE KIT, 2-7/8 OD X 2-7/8 OD | 24 | 8.37 LBS |
COMPONENTS FOR INSTALLATION
MP-PP15M-12C-126 SHOWN
1 | MC-RMHD-1245-3 | 3 SECTOR RING MOUNT, 12″-45″ POLE | 1 | 329.19 LBS | |
---|---|---|---|---|---|
2 | MC-AS-7000-00 | WELDMENT,CO-LOCATION PLATFORM DECK | 3 | 208.07 LBS | |
3 | MC-AS-5000-00 | WELDMENT, MONO PLATF SPINDLE | 3 | 101.74 LBS | |
4 | MC-AS-6100-00 | WELDMENT, MINI KICKER BRACKET | 3 | 14.77 LBS | |
5 | RK48-00 | MINI KICKER ARM SUPPORT TUBE 48″ | 3 | 22.96 LBS | |
6 | MTC323704 | CLAMP BAR | 6 | 2.37 LBS | |
7 | RK02 | CONNECTION BRACKET | 6 | 1.21 LBS | |
8 | GB-0550A | 5/8″ X 5″ GALV BOLT KIT (A325) | 6 | 0.52 LBS | |
9 | MT-381-10 | 5/8″ X 10″ GALV THREADED ROD | 6 | 0.86 LBS | |
10 | GWF-05 | 5/8″ GALV FLAT WASHER, 1.7OD | 39 | 0.06 LBS | |
11 | GB-0522A | 5/8″ X 2-1/4″ GALV BOLT KIT (A325) | 27 | 0.28 LBS | |
12 | MC-AS-1200-00 | CLAMP PLATE, CO-LOCATION PLATFORM | 6 | 2.93 LBS | |
13 | 9615-14 | BOLT,CARRIAGE,5/8-11,8.5,STL GALV | 12 | 0.82 LBS | |
14 | GWL-05 | 5/8″ GALV LOCK WASHER | 24 | 0.03 LBS | |
15 | GN-05 | 5/8″ GALV HEX NUT | 24 | 0.08 LBS | |
16 | GB-05145 | 5/8″ X 1-1/2″ GALV BOLT KIT | 3 | 0.22 LBS | |
17 | GUB-4355 | 1/2″ X 3-5/8″ X 5″ GALV U-BOLT | 12 | 0.71 LBS | |
18 | MT546180 | 2.875″ O.D. X 180″ PIPE | 6 | 87.21 LBS | |
19 | GUB-4352 | 1/2″ X 3″ X 5-1/4″ GALV U-BOLT | 12 | 0.71 LBS | |
20 | MC-AS-6300-00 | CORNER WELDMEMT, HANDRAIL | 3 | 31.87 LBS | |
21 | XP-2525 | CROSSOVER PLATE KIT, 2-7/8 OD X 2-7/8 OD | 24 |
22| MT-546-126| 4| PIPE, 2.875″OD X 126″| 12| 61.05 LBS
3
COMPONENTS FOR INSTALLATION
MP-PP15M-15C-96 SHOWN
![COMPONENTS FOR INSTALLATION
MP-PP15M-15C-96 SHOWN](https://manuals.plus/wp-content/uploads/2024/01 /COMMSCOPE-MP-PP-Series-Co-Location-Mounts_30.png)
1 | MC-RMHD-1245-3 | 3 SECTOR RING MOUNT, 12″-45″ POLE | 1 | 329.19 LBS |
---|---|---|---|---|
2 | MC-AS-7000-00 | WELDMENT,CO-LOCATION PLATFORM DECK | 3 | 208.07 LBS |
3 | MC-AS-5000-00 | WELDMENT, MONO PLATF SPINDLE | 3 | 101.74 LBS |
3
4| MC-AS-6100-00| WELDMENT, MINI KICKER BRACKET| 3| 14.77 LBS
5| RK48-00| MINI KICKER ARM SUPPORT TUBE 48″| 3| 22.96 LBS
6| MTC323704| CLAMP BAR| 6| 2.37 LBS
7| RK02| CONNECTION BRACKET| 6| 1.21 LBS
8| GB-0550A| 5/8″ X 5″ GALV BOLT KIT (A325)| 6| 0.52 LBS
9| MT-381-10| 5/8″ X 10″ GALV THREADED ROD| 6| 0.86 LBS
10| GWF-05| 5/8″ GALV FLAT WASHER, 1.7OD| 39| 0.06 LBS
11| GB-0522A| 5/8″ X 2-1/4″ GALV BOLT KIT (A325)| 27| 0.28 LBS
12| MC-AS-1200-00| CLAMP PLATE, CO-LOCATION PLATFORM| 6| 2.93 LBS
13| 9615-14| BOLT,CARRIAGE,5/8-11,8.5,STL GALV| 12| 0.82 LBS
14| GWL-05| 5/8″ GALV LOCK WASHER| 24| 0.03 LBS
15| GN-05| 5/8″ GALV HEX NUT| 24| 0.08 LBS
16| GB-05125| 5/8″ X 1-1/4″ GALV BOLT KIT| 3| 0.20 LBS
17| GUB-4355| 1/2″ X 3-5/8″ X 5″ GALV U-BOLT| 12| 0.71 LBS
18| MT546180| 2.875″ O.D. X 180″ PIPE| 6| 87.21 LBS
19| GUB-4352| 1/2″ X 3″ X 5-1/4″ GALV U-BOLT| 12| 0.71 LBS
20| MC-AS-6300-00| CORNER WELDMEMT, HANDRAIL| 3| 31.87 LBS
21| XP-2525| CROSSOVER PLATE KIT, 2-7/8 OD X 2-7/8 OD| 30| 8.37 LBS
COMPONENTS FOR INSTALLATION
MP-PP15M-15C-126 SHOWN
COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES;
INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.
ANTENNA SPACING SHOWN
13′ MOUNT – 4 POSITION
15′ MOUNT – 4 POSITION
15′ MOUNT – 5 POSITION
OPTIONAL ACCESSORIES
(ALL THE ACCESSORY ITEMS TO BE PURCHASED SEPARATELY)
MP RRU SUPPORT KIT:
XP-PM-D
XP-PM-S
MOUNTED ON 13′ PLATFORM SHOWN FOR REFERENCE
MOUNTED ON 15′ PLATFORM SHOWN FOR REFERENCE
FAQ (Frequently Asked Questions)
Q: What is the weight of the MP-PP13M-12C-96 configuration?
A: The weight of the MP-PP13M-12C-96 configuration is 2539.2 lbs.
Q: What is the EPA of the MP-PP15M-15C-126 configuration?
A: The EPA of the MP-PP15M-15C-126 configuration is 38.05 ft^2.
Q: Where can I find the patent information for this product?
A: You can find the patent information for this product at https://www.cs- pat.com.