Ruijie RG-RAP2200 F Dual Band Ceiling Mount Access Point User Manual
- June 16, 2024
- RuiJie
Table of Contents
Ruijie RG-RAP2200 F Dual Band Ceiling Mount Access Point
Packing List
| Item | Name | Quantity | Unit |
|---|---|---|---|
| 1 | Host | 1 | Set |
| 2 | Mounting Bracket | 1 | Piece |
| 3 | Phillips Pan Head Screw | 2 | Piece |
| 4 | Expansion Anchor | 2 | Piece |
| 5 | User Manual | 1 | Copy |
| 6 | Warranty Card | 1 | Copy |
Appearance and Interface
Top View
Bottom View
Note:
- Reset button
- LAN2 port
- LAN 1 /PoE port
- DC-12V power port
- When powering the AP through PoE, connect one end of the Ethernet cable to LAN 1 /PoE port and the other end to a PoE-capable device.
- When powering the AP via local power supply, connect the DC- 12V/1.5A power adapter to the power port.
LED Indicator and Button
| LED Indicator and Button | Frequency | Description |
|---|---|---|
| LED Indicator | Solid green | Normal operation |
| Off | The AP not receiving power. | |
| Blinking(0.5Hz) | Normal operation, but the AP is not connected to Ruijie |
Cloud.
Fast blinking(10Hz)| Possible cases:
1. Restoring the factory default settings
2. Upgrading the firmware 3.Restoring the image file
4. Initializing the device
Reset Button| Press for less than 2 seconds| Restart the device
Press for more than 5 seconds| Restore the factory default settings
Product Installation
- Connect the Ethernet cable to the LAN port.
- Align the square feet on the rear of the AP over the mounting holes on the bracket. Slide the AP into the holes until it clicks into place.
Network Configuration
- Method 1 (Recommended)
- Scan the QR code on the manual or device to download the Ruijie Reyee App, and configure the network according to the guide on the App.
- Scan the QR code on the manual or device to download the Ruijie Reyee App, and configure the network according to the guide on the App.
- Method 2
- Connect to the SSID (@Ruijie-mxxxx when there are multiple devices and @Ruijie-sxxxx when there is only one device), or connect the cable with the LAN port, and visit http:/110.44.77.253 (default password: admin).
- It is recommended to configure the IP address as 10.44.77.250.
Read User Manual Online (PDF format)
Loading......