MeTra 95-6532B Dash Kit Installation Guide
- June 16, 2024
- Metra
Table of Contents
MeTra 95-6532B Dash Kit
KIT FEATURES
- ISO DDIN radio provision
- Painted to match factory finish
KIT COMPONENTS
-
A) Radio trim panel
-
B) Radio brackets
-
C) White panel clips (4)
WIRING & ANTENNA CONNECTIONS (sold separately)
Antenna Adapter:
40-EU55 Amplified antenna adapter Wiring Harness: Visit
metraonline.com for premium options.
TOOLS REQUIRED
- Panel removal tool
- Phillips screwdriver
- Torx driver
- Cutting tool
ATTENTION : With the key out of the ignition, disconnect the negative
battery terminal before installing this product. Ensure that all installation
connections are secure before cycling the ignition to test this product.
NOTE : Refer also to the instructions included with the aftermarket
radio.
DASH DISASSEMBLY
-
Using the panel removal tool, carefully unclip and remove the radio trim panel. (Figure A)
-
Remove (4) T-20 Torx screws securing the radio, disconnect the wiring, and then remove the radio. (Figure B)
-
Cut shaded area at the top of the radio cavity. (Figure C)
Continue to Kit Assembly
KIT ASSEMBLY
ISO DDIN radio provision
-
Attach the (4) white panel clips provided with this kit to the Radio Housing. (Figure A)
-
Attach the radio brackets to the aftermarket radio using the screws supplied with the radio. (Figure B)
-
Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/ or AXXESS.
-
Reconnect the negative battery terminal and test the aftermarket radio for proper operation.
-
Mount the radio into the dash using the factory screws and slip the radio trim panel, provided with this kit, to the radio face.
-
Reassemble the dash in the reverse of the dash disassembly to complete the installation.
Customer Support
Having difficulties? We’re here to help.
Contact our Tech Support line at:
386-257-1187
Or via email at: techsupport@metra-autosound.com
Tech Support Hours (Eastern Standard Time)
Monday – Friday: 9:00 AM – 7:00 PM
Saturday: 10:00 AM – 7:00 PM
Sunday: 10:00 AM – 4:00 PM
KNOWLEDGE IS POWER
Enhance your installation and fabrication
skills by enrolling in the most recognized and respected mobile electronics
school in our industry.
Log onto www.installerinstitute.edu or
call 386-672-5771 for more information
and take steps toward a better tomorrow.
Metra recommends MECP certified technicians
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 2/2/22 INST95-6532B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>