niko 552-721X1 Connected Single Switch Zigbee Instruction Manual
- June 16, 2024
- niko
Table of Contents
- niko 552-721X1 Connected Single Switch Zigbee
- Product Information
- Product Usage Instructions
- Wiring
- Installation
- Dimensions
- Stand-alone use
- Connected use
- Control
- Online guide
- Troubleshooting
- LED behaviour
- Reset
- Specifications
- Load table
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
niko 552-721X1 Connected Single Switch Zigbee
Product Information
Specifications
- Product Name: Niko Home Control
- Model Number: 552-721X1
- Wireless Smart Hub: 552-00001
- Wireless Bridge: 550-00640
- Max. Circuit Breaker Rating: 16 A
Product Usage Instructions
Stand-alone Use
All 230 V connected devices for Niko Home Control for traditional wiring can
be used in stand-alone mode until they are connected to a wireless smart hub
(552-00001) or wireless bridge (550-00640). In stand-alone mode, they switch
their own contact.
Mechanical push-button extensions that are wired to the extension terminal can
also be used in stand-alone mode.
Connected Use
- Connected to a Niko Home Control installation: More advanced functionalities become available if you connect this device to your wireless smart hub (552-00001) or wireless bridge (550-00640) using the Niko Home Control programming software or Niko Home app.
Consult guide.niko.eu for more information about the installation and the connected use.
Download the Niko Home Control programming software:
FAQ
How do I install the product?
To install the product, follow the installation instructions provided in the
user manual. Ensure that the product is secured with a miniature circuit
breaker (MCB) of max. 16 A in the electrical cabinet. The MCB rating is
limited by national installation rules.
Can I use the product in stand-alone mode?
Yes, you can use the product in stand-alone mode until it is connected to a
wireless smart hub (552-00001) or wireless bridge (550-00640). In stand-alone
mode, the product will switch its own contact.
How do I connect the product to a wireless smart hub or wireless bridge?
To connect the product to a wireless smart hub or wireless bridge, use the
Niko Home Control programming software or Niko Home app. Refer to the
installation guide on guide.niko.eu for detailed instructions.
Connected single switch, Zigbee®
Wiring
230 V – OFF
This product must be secured with a miniature circuit breaker (MCB) of max. 16
A in the electrical cabinet.
The MCB rating is limited by national installation rules.
All mechanical push-button extensions wired to the same terminal, will show the same behaviour (either the standard behaviour of the actor or a programmed behaviour). It is not possible to configure the behaviour of these extension switches separately. The maximum total wire length for all extension buttons connected to the Zigbee® switch is 50 m.
Installation
Dimensions
Network setup
Follow the Zigbee® network setup advice below to guarantee the meshing of the
devices before installing the switch on the wall.
More information on Zigbee® network principles:
guide.niko.eu.
Also, respect a minimum distance of 2 m between a Zigbee® device (including the smart hub) and another RF transmitter (for example a Wi-Fi device) or devices such as motors, pumps, electronic LED transformers, solar panel inverters, home battery storage .
Stand-alone use
All 230 V connected devices for Niko Home Control for traditional wiring can be used in stand-alone mode until they are connected to a wireless smart hub (552-00001) or wireless bridge (550-00640). In stand-alone mode, they switch their own contact. Mechanical push-button extensions that are wired to the extension terminal can also be used in stand-alone mode.
Connected use
Connected to a Niko Home Control installation
More advanced functionalities become available if you connect this device to
your wireless smart hub (552-00001) or wireless bridge (550-00640) using the
Niko Home Control programming software or Niko Home app.
Consult guide.niko.eu for more information about the installation and the
connected use.
Download the Niko Home Control programming software
www.niko.eu/article/550-99102
(Windows)
www.niko.eu/article/550-99202 (Mac)
Control your device with the Niko Home app
How to connect the Niko device to the Niko Home Control network
- Reset the Niko Zigbee® device when it is already connected to another network. See § Reset.
- Follow the onboarding procedure in the Niko Home Control programming software or the Niko Home app to add new Niko Zigbee® devices.
- Set the Niko Zigbee® device in pairing mode by pressing the switch button 3 x within a period of 6 seconds > See image § Pairing mode. The blue LED starts blinking for max. 5 minutes.
- The connected single switch is successfully added to the Zigbee® network when the blue LED is ON for 4 seconds.
Connected to a third-party Zigbee® network
Niko connected Zigbee® devices behave like standard Zigbee® devices in third-
party networks that allow this operation. Consult the manufacturer’s manual
for more information on the possibility to use third-party Zigbee® devices in
their network.
Specific Niko Home Control functions will not be enabled with Niko Zigbee®
devices connected to a third-party Zigbee® controller/gateway.
Consult the details on guide.niko.eu. See also the disclaimer on
www.niko.eu/zigbee.
Control
Online guide
Consult guide.niko.eu for more information about the installation, onboarding, the stand-alone/connected use and troubleshooting.
Troubleshooting
| Problem | Cause | Action |
|---|
I want to use the connected switch, but I don’t yet have a
smart hub or wireless bridge to con- nect it with| All 230 V
connected devices for Niko Home Control can be used in stand-alone mode until
they are connected to a smart hub or wireless bridge. In this mode, they only
switch their own contact. Extension switches that are wired to the connected
switch can also be used in stand-alone mode
My smart hub or wireless bridge doesn’t work anymore| Consult
the manuals of the wireless smart hub
(552-00001) or
wireless bridge 550-00640) at
| If the power of the smart hub or wireless bridge switches off, all 230 V
connected devices will continue to operate in stand- alone mode. They will
only switch or dim their own contact. Consult the respective product manuals
to resolve the issue
The connected switch cannot be found
in the Niko Home app or programming software
| The power supply is off| Switch on the power supply
The distance between the connected switch and the smart hub or wireless bridge
is too small| Make sure there is a distance of at least 2 meters between the
device and the smart hub or wireless bridge
The distance between the connected switch and the smart hub, wireless bridge
or another con- nected device is too big| Make sure there is a distance of
maximum 10 meters between the device and the smart hub, wireless bridge or a
subsequent 230 V connected Zigbee® device. To increase the range, add, for
example, an additional smart socket outlet or Zigbee® extender to the network
There is no con- nection between the Niko Home app or laptop/pc and the smart
hub or wireless bridge| Check the connection to the smart hub or wireless
bridge. Consult the respective product manuals to resolve the issue
The load does not switch on| The miniature circuit breaker (MCB) of the
lighting circuit is disabled or there is a short circuit| Check whether the
lamp com- plies with the load specifications described in this manual
The switch is defective| Replace the switch
The lamp is defective| Replace the lamp
The lamp does not switch off completely and displays an afterglow|
The cabling is too long, which creates capaci- tive effects with leakage cur-
rents. Or you’re switching a low wattage lamp that is sensitive to leakage
currents| Install one or more LED compensators (310-05001) over the switched
phase and the neutral wire
LED behaviour
Reset
Specifications
-
Article number 552-721X1
-
Maximum load 1 x 10 A
-
Power supply 230 Vac ± 10%, 50 Hz
-
Circuit Breaker maximum MCB rating 16 A*
-
Max. inrush current 100 A
-
Wire capacity 1 x 2.5 mm2
-
Protocol Zigbee® 3.0, 2.4 GHz
-
Mounting method flush-mounting box
-
Flush-mounting box specifications depth = min. 40 mm
(cabling space included)
claw/screw fixing = 60 mm
inner diameter box = 60 mm
multiple boxes centre distance horizontal = 71 mm
multiple boxes centre distance vertical = 71 mm
multiple boxes centre distance vertical = 60 mm for BE and FR -
Mounting height 110 – 120 cm
-
Modification of settings stand-alone mode: buttons on front panel, behind the central plate connected mode:
-
Niko Home Control programming software
-
Niko Home app
-
Max. cable length extension switches 50 m
-
Maximum range (between switch and smart hub or wireless bridge) 10 m
(longer ranges possible with meshing capability of 230 V connected Zigbee® devices) -
Maximum per installation max. 50 connected Zigbee® devices
-
Operating frequency 2.4 GHz
-
Maximum RF power 10 dBm
-
Protection degree IP20
-
Ambient temperature 0 – 40 °C
-
Dimensions (HxWxD) (552-72101, 552-72121) 71 x 73 x 38.6 mm
-
Dimensions (HxWxD) (552-72111, 552-72131) 73 x 73 x 38.6 mm
-
Weight 70 g
-
System compatibility talks with Homey
-
Marking CE, Zigbee®
The MCB rating is limited by national installation rules
Load table
Below table gives an overview of the permitted loads at an ambient temperature of 40 °C
Warnings regarding installation
The installation of products that will permanently be part of the electrical installation and which include dangerous voltages, should be carried out by a qualified installer and in accordance with the applicable regulations. This user manual must be presented to the user. It should be included in the electrical installation file and it should be passed on to any new owners. Additional copies are available on the Niko website or via Niko customer services.
Support & contact
nv Niko sa
Industriepark West 40
9100 Sint-Niklaas, Belgium
www.niko.eu
+32 3 778 90 80 support@niko.eu
Niko prepares its manuals with the greatest care and strives to make them as
complete, correct and up-to-date as possible.
Nevertheless, some deficiencies may subsist. Niko cannot be held responsible
for this, other than within the legal limits. Please inform us of any
deficiencies in the manuals by contacting Niko customer services at
support@niko.eu.
References
- Confluence Mobile - Niko Guide
- Niko - home automation, switches, socket outlets and detector
- Zigbee
- Niko - home automation, switches, socket outlets and detector
- Niko Home Control II programming software for Windows
- Niko Home Control II programming software for Mac
- Zigbee