Ickle Bubba Stomp Luxe Pushchair Galaxy Car Seat Instruction Manual

Ickle Bubba Stomp Luxe Pushchair Galaxy Car Seat

Product Information

Specifications

• Product Name: Stomp Travel System
• Number of Configurations: 4
• Components: Carry Cot, Stroller, Car Seat

Configurations
The Stomp Travel System can be configured in multiple ways to suit your needs:

• Configuration
• Configurations
• Configurations
• Configurations

Components
The Stomp Travel System includes the following components:

• Carry Cot
• Stroller Attachment
• Car Seat

Carry Cot/Stroller Attachment
This section explains how to set up the carry cot and stroller attachment:

How to use the stroller
This section provides instructions on how to use the stroller:

1. Use of the poussette
2. Benutzen des kinderwagens
3. Use of cochecito

Important Safety Information
This section contains important safety guidelines:

• Important safety information
• Important safety information

Warranty Information
This section provides information about the warranty:

• Guarantee-information
• Informacje o gwarancji
• Information guarantors

Product Usage Instructions

Unfolding the Stroller
To unfold the stroller, follow these steps:

1. Squeeze the stroller frame together slightly whilst pulling the release catch as shown.
2. Pull the stroller upwards until you hear the frame click into the upright position.
3. Test the chassis by pushing downwards on the handlebar to make sure it is securely locked in place at the joint (a).

FAQ

• Q: How many configurations does the Stomp Travel System have?
  A: The Stomp Travel System has 4 configurations.

• Q: What components are included in the Stomp Travel System?
  A: The Stomp Travel System includes a carry cot, stroller attachment, and car seat.

• Q: How do I use the stroller?
  A: To use the stroller, follow the instructions provided in the “How to use the stroller” section.

• Q: Is there any important safety information I should be aware of?
  A: Yes, please refer to the “Important Safety Information” section for important safety guidelines.

• Q: What is the warranty information for the Stomp Travel System?
  A: Warranty information can be found in the “Warranty Information” section.

Dear Parents
Congratulations on the purchase of your Stomp Travel System! Your child’s safety can only be guaranteed if this product is used according to these instructions. Therefore, please take time to read through this instruction manual carefully and keep it for future reference.

FEATURES

Available Configurations

1. Interchangeable hood
2. Removable bumper bar
3. 5-point safety harness
4. Comfortable seat liner
5. 360-degree swivel/lockable wheels
6. Built-in front suspension
7. Adjustable handle
8. Easy action fold without removing the seat
9. Reclining seat unit
10. Forward and rear-facing options
11. Easy action foot brake
12. Large easy-access shopping basket

COMPONENTS

• A. Handlebar Cover
• B. Handlebar Adjuster
• C. Right Folding Button
• D. Left Folding Button
• E. Seat Unit
• F. Seat Disassembly Button
• G. Joint Point Cover
• H. Brake Bar
• I. Storage Basket
• J. Rear Wheel
• K. Wheel Disassembly Button
• L. Canopy
• M. Bumper Bar
• N. Canopy Connector
• O. Recline Buttons
• P. Revolving Lock
• Q. Front Wheel
• R. Seat/Carry Cot Frame*
• S. Carry Cot Fabric
• T. Seat Unit Fabric
• U. Chassis
• V. Carry Cot Apron
• W. Foot Warmer
• X. Seat Liner
• Y. Raincover

IMPORTANT:
The Carry Cot/Seat Unit Frame (R) and the Carry Cot Fabric (S) are already assembled. When converting from carrycot mode to stroller mode, the carrycot fabric will need to be removed from the carrycot frame for the seat unit to be assembled with component (T).

SET-UP & ASSEMBLY

Unfolding the Stroller

1. Squeeze the stroller frame together slightly whilst pulling the release catch as shown.
2. Pull the stroller upwards until you hear the frame click into the upright position. Test the chassis by pushing downwards on the handlebar to make sure it is securely locked into place at the joint (a).

Front Wheel Installation

1. Keep holding the front wheel button and attach the front wheel to the chassis. Repeat the other side.
2. Please ensure you test your installation by pulling the front wheel down a few times before using it.
   NOTE: Please ensure that the front wheels are locked when using on rough terrain.

Brake Bar Installation

1. Please ensure the chassis is unfolded before installing the brake bar and wheels. Attach the brake bar to the rear of the chassis as shown above.

2. Ensure the silver locking clips are visible on each side and test this by pulling the brake bar downwards once it has been installed.
   Rear Wheel Installation

3. To attach the rear wheels simply press the centre button whilst pushing onto each side of the axle. Test this by trying to remove the wheels without pressing the centre button.

4. To disassemble the wheels push the centre button and pull.

CARRYCOT SET UP

Preparing the Carry cot

1. The carrycot fabric should already be attached to the carrycot/seat unit frame.
   IMPORTANT: The position of the carrycot may need to be adjusted to make it level. This can be done by firmly pressing the recline buttons (a) located on either side of the carrycot frame, as shown in the picture.
   Bumper Bar Installation

2. Line up the holes on each side before pushing them firmly into place.

3. To remove, press the centre button (b) inwards whilst pulling the bumper bar upwards.

Canopy Installation

1. Take the longer strip from part (a) and thread it through the front section of the canopy fabric (b). Repeat the same process with the shorter strip from part (a) by threading it through the rear part of the canopy fabric.
2. Make sure the canopy connectors are facing inward.
3. Insert the shorter strip from part (a) into the rear holes and the larger strip into the front holes of the canopy connectors. Fasten the popper of the canopy onto the canopy connector.
4. The longer strip (c) shall be above while the shorter strip (d) is on the lower position. Zip the canopy onto the carrycot fabric and clip the connector onto the frame.

SEAT UNIT SET UP

Preparing the Seat Unit

1. Remove the carrycot fabric from the frame in preparation for the seat unit attachment.

2. To attach the seat unit, first slide the top of the seat fabric onto the top of the chassis.

3. Feed the two narrow fabric trim panels positioned on either side of the seat unit, into the slots on the inside of the seat frame which are positioned just below the bumper bar attachment point in the middle of the seat frame.
   Preparing the Seat Unit

4. Secure the fabric seat in place using the Velcro fastenings and eyelet hooks.

5. Clip the canopy onto the frame and zip onto the seat unit fabric.
   IMPORTANT: The seat unit is suitable for children 6 months or over .
   Seat Harness Attachment

6. Locate the holes which can be found on either side of the seat section of the seat unit fabric.

7. Slide the waist strap through the holes with the silver buckle end going from inside to out.

8. Loop the strap around the circular piece of the chassis located just above the release clips and then slide the material through the small gap between the silver buckle.

9. Adjust the length of the harness to the desired position, ensuring a snug fit.

Carry Cot/Stroller Attachment

Installation

1. Line up the release clips with the chassis and then push down until both sides click into place. Please test this by pulling upwards.
   IMPORTANT: There may be a slight movement to the carrycot when it is locked onto the chassis.
   Disassembly

2. Push the release buttons forward until you feel it click before lifting upwards to remove it.

Car seat installation

Please refer to the car seat instruction manual on how to attach and detach the car seat from your pushchair frame.

HOW TO USE THE STROLLER

Front Wheel Lock Feature

1. To lock the front wheels in place, simply press the button downwards. Pull upwards to release and enable a 360-degree turn.

2. IMPORTANT: Ensure the wheels are in a locked position when used on uneven or rough terrain.
   Handlebar Adjustment

3. To adjust the height of the handlebar press the buttons on each side inwards simultaneously whilst lifting up or down.
   Seat Reclining Adjustment

4. To adjust the recline of the stroller, press the two recline buttons inwards simultaneously. There are 4 recline positions.
   Reversing the Seat Unit

5. To reverse the seat unit direction, simply follow the same steps as indicated in the earlier section.
   Travel System Brake

6. To apply the brake simply push down. To remove the brake function lift upwards.
   Safety Harness

7. Insert (a) onto (b). Put (a), (b) and (c) together and click into place. Repeat on the opposite side.
   Harness Release

8. Press button (d) to release.
   Folding The Stroller

9. Press and hold down the fold button with your index finger.

10. Whilst holding down the fold button, pull both levers towards you and then fold the chassis down.

11. Follow the arrow direction.

12. Secure the chassis in place using the folding lock.

ACCESSORIES

Raincover

1. Line up the seams on the rain cover with the seams on the hood. Open the window using the Velcro to ensure sufficient ventilation.
   Carry Cot Apron

2. Secure the carrycot apron in place by fastening the poppers on each side.
   Seat Liner

3. Thread the harness of the seat unit through the slots of the seat liner to secure it into place – only when in stroller mode.
   **Foot Warmer***

4. Attach the bottom part of the foot warmer to the underside of the seat unit frame. Then, wrap the top part of the foot warmer under and over the bumper bar and secure it in place using the poppers.

   • IMPORTANT: Foot Warmer is only included in certain packages”

IMPORTANT SAFETY INFORMATION

IMPORTANT:
READ THESE INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP THEM FOR FUTURE REFERENCE.

Your child’s safety may be affected if you do not follow these instructions. Failure to follow these warnings and instructions could result in serious injury or death.

• The Stomp carry cot unit is suitable from birth. It is suitable for a child who cannot sit up unaided, roll over and cannot push itself up on its hands and knees. The maximum weight of the child is 9kg.
• The Stomp seat unit is suitable for children from 6 months up to 22kgs or 4 years (whichever comes first).

PRAM

WARNINGS

• Never leave the child unattended.
• This product is not suitable for children under 6 months.
• This product is not suitable for running or skating.
• Always use the restraint system.
• Ensure that all the locking devices are engaged before use and when placing /removing a child.
• To avoid injury ensure that your child is kept away when unfolding and folding this product.
• Use a harness as soon as the child can sit unaided.
• Do not let the child play with this product.
• Check the pram body, seat unit or car seat attachment devices are correctly engaged before use.
• Do not carry more than one child in this vehicle.
• Do not use if any part of the product is broken, torn or missing.

CARRY COT

WARNINGS

• Do not let other children play unattended near the carrycot.
• Do not use it if any part of the carrycot is broken, Torn or missing.
• This product is only suitable for a child who cannot sit up unaided, roll over and cannot push himself up on his hands and knees. Maximum weight 9kgs.
• Never use the carry cot on a stand.
• Only use on a firm, horizontal level and dry surface.
• Keep away from fire and other sources of strong heat.
• The head of the child in the carrycot should never be lower than the body of the child.
• Do not add a mattress to the carrycot.
• Only use replacement parts approved or supplied by the manufacturer.
• Handles and the bottom of the carrycot should be inspected regularly for signs of damage and wear.
• This carry cot is not intended to be used on its own as a sleeping unit. It is manufactured to use with the stomp chassis.

WHOLE PRODUCT

WARNINGS

• Use the parking brake when stationary and when removing or placing the child into the stroller.
• Any additional load attached to the pushchair will affect the stability and safety of the vehicle.
• Do not use a platform with this product as it may render the product unsafe.
• Do not use replacement parts or accessories other than those approved by Ickle Bubba.
• The car seat provided does not replace a cot or bed and should your child need to sleep, then it should be placed in a suitable pram body, cot or cot bed.
• A basket is provided for the carriage of goods up to a maximum weight of 2.5kg. Store in a safe place away from children.
• To avoid the risk of suffocation, keep all plastic packaging and materials out of reach of children.

THIS BABY STROLLER HAS BEEN APPROVED IN ACCORDANCE TO EN1888-2-2018 AND EN1466-2014

CARE AND MAINTENANCE

• Always check the stroller for any wear or damage.
• Storage – Store the stroller in a dry place, do not store in a damp or hot environment. Never leave in sunlight for prolonged periods.
• Chassis – Regularly lubricate all moving parts. Polish metal with a clean dry cloth.
• Wheels – Use a soft brush or cloth.
• Seat Unit/Carry cot outer/Removable Canopy and Shopping basket Sponge clean with warm soapy water. Rinse with clean water to avoid staining. Dry naturally away from direct heat and prolonged sunlight. Do not use strong detergents or bleach.
• Carry cot mattress removable cover:

Dimensions

• Open: L: 61cm H: 104cm D: 95cm
• Closed: L: 61cm H: 30cm D: 77cm

WARRANTY INFORMATION

Please ensure you have registered your product online and keep your proof of purchase for any future claim. If you register within 28 days of receiving the item we will extend your standard warranty to 4 years from the date of purchase at no extra cost.

If you have any problem with your Ickle Bubba product when under warranty we offer a 4-step speedy aftercare service within 5 working days.

If the item was purchased directly from us, we will pick up the warranty claim directly from you. If the item was purchased through one of our resellers, you will need to contact the reseller to explain the problem. The reseller will then liaise with us on your behalf. We are happy to fulfil our warranty commitments and offer a repair service if needed.

Standard Warranty Terms

• Travel Chassis and seat frames – 2 years
• Wheels – 1 year
• Seat fabrics, carrycot hood, carrycot apron, handle bar cover, bumper bar and accessories – 6 months
• Car seats – 2 years

Please note the warranty applies in the country of purchase only. The warranty applies to the first owner and is non-transferable.

FREE Extended Warranty Offer
If you register your product with us online within 28 days of receiving the item we are happy to double the warranty period – twice as much peace of mind for FREE!

• This extended warranty does not cover fabrics and wheels, which are covered by the standard warranty only.

Customer service

• 01554 707022
  • 09:00 – 17:00 Monday
  • 09:00 – 16:00 Friday

You will need the original order number as proof of purchase.

Please retain your original receipt of purchase and keep it with this instruction booklet.

icklebubba.com

• [email protected]
• Atlantic House, Unit 2, Atlantic Close, Swansea, SA7 9FJ Unit 125, 3 Lombard Street East, Dublin 2, DO2 HC78.
• www.icklebubba.com.

References

• Travel Systems, Pushchairs, Car Seats & Furniture | Ickle Bubba

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>