GLADIATOR GANA04CKMX Flex Caster Kit Instruction Manual

June 12, 2024
GLADIATOR

Models:
GANA04CKMX
FLEX CASTER KIT
Assembly InstructionsGLADIATOR GANA04CKMX Flex Caster
Kit

CASTER SAFETY

Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
DANGER You can be killed or seriously injured if you don’t immediately follow instructions.
WARNING You can be killed or seriously injured if you don’t follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

ASSEMBLY INSTRUCTIONS

Tools and Parts
Gather the required tools and parts before starting installation.
Tools Needed:

  • 10mm Open end wrench

Parts Supplied:

  • Rigid casters (2)
  • Swivel casters (2)
  • M6 x 16 hex flange bolts (16)

Caster Use Requirements

  • Intended for use on Gladiator ® Flex cabinet systems’ base cabinets only.
  • Maximum weight limit is 250 lbs (113.4 kg) (weight capacity of individual caster).

Install the Casters
IMPORTANT: Install the casters to the cabinet bottom with the two rigid casters (P1 & P2) at the front and the two swivel casters (P3) at the rear.

  1. Empty the Gladiator ® Flex base cabinet and lock the cabinet door/drawer
    WARNING Excessive Weight Hazard Use two or more people to move and install cabinet.
    Failure to do so can result in back or other injury.

  2. Lay the cabinet on its back on top of cardboard or other protective material.

  3. Install the two rigid casters (P1 & P2) to the front of the cabinet’s bottom with eight M6 x 16 hex flange bolts (F1). Tighten securely. Make sure the brake of each caster is toward the inside of the cabinet.

  4. Install the two swivel casters (P3) to the back of the cabinet’s bottom with eight M6 x 16 hex flange bolts (F1). Tighten securely.GLADIATOR GANA04CKMX Flex Caster Kit - CastersP1: Left rigid caster
    P2: Right rigid caster
    P3: Swivel casters
    F1: M6 x 16 hex flange bolts

WARRANTY

For warranty information:
In the U.S.A. call 1-866-342-4089 or visit our website at www.GladiatorGW.com
In Canada call 1-800-807-6777 or visit our website at www.gladiatorgarageworks.ca
Limited Lifetime Parts Warranty for metal parts.
The warranty excludes incidental / inconsequential damages and failure due to misuse, abuse or normal wear and tear.

W11637536A
In U.S.A. call: 1-866-342-4089
In Canada call: 1-800-807-6777
www.gladiatorgarageworks.com
®/™ ©2022 Gladiator. All rights reserved.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

GLADIATOR User Manuals

Related Manuals