GOLFJOY GDS Plus Launch Monitor User Manual

GOLFJOY GDS Plus Launch Monitor

WELCOME TO GOLFJOY WORLD

• Thank you for choosing us.
• The user manual will help you thoroughly understand the GDS Plus launch monitor.
• Please feel free to contact us if you need any further information.

Product Accessories

Output: 24V, 3.75A
3| Ethernet Cable {Optional)xl| Spec: Cat6 Length: 2m
4| Position Board{Optional) xl| Used to determine the placement of GOS Plus
5| Alignment Stick {Optional)xl| Used to determine the placement of GOS Plus
6| Mark Sticker {Optional) CSO| Used to mark the club
7| Accessories {Optional)| Fixed base, Screws Cross-shaped Tee xl Anti-slice Teex2

Design and Features

1. Launch Monitor Interface
   • Power On/Off Button (1): Press to turn on/off the sensor. Blue light indicates the monitor is on. Long press (>Ss} to reset IP to default (192.168.1.147).
   • Power Input Port (2): Connect the 24V power adapter to charge the monitor (220V}.
   • Ethernet Port (3): For client connection and remote upgrades.
   • Status Light (4): Blue light flashes during startup (-20s}, then stays constant when ready, and turns green when the ball is detected.
   • Infrared Light (5): On when connected to the APP or PC terminal.
2. Fixed Base
   • Fixed Pins (1, 2, 3): Insert these pins into the three fixing holes (number 4) at the bottom of the monitor to secure the monitor.
   • Fixed Holes (5, 6, 7): Use wood screws to position the base on the ground and secure the base.

Quick Start Guide

1. Position Board
   • Locate Metal Case: use this circular hole as the TEE position when the launch monitor has a protective cover.
   • Locate Monitor: Use this circular hole as the TEE position when the launch monitor does not have a protective cover.
2. Swing Instructions
   • Note: Firmware v3.0.8 and above supports Mark-free balls (stickers still required on the head). Compatible with black or dark-colored logo balls, not with pure white, blue, or red logo balls.
3. Position Board Placement
   • Pass TEE through the “Locate Monitor” hole. Ensure Position Board is level with the hitting mat.
   • Place the Launch Monitor on the equipment positioning spot and ensure it is parallel to the reference line.
   • The sensing area size is shown in the figure.
4. Alignment Stick
   • Prerequisites
   • Use the GOLFJOY Lite app, version V2.3.5 or higher.(Computer client not supported)
   • Firmware version: GDSPLUS_V3.0.8 or higher.
   • For early shipments, you may encounter the following issues when using this feature. Please contact customer support for solutions.
   • Instructions
   • The Alignment Stick consists of three segments initially, with a total length of 39.37 inches (100cm) when assembled.
   • Position the three markers of the Alignment Stick according to the diagram provided to obtain the TEE position. Ensure that the launch monitor is properly connected. Place the golf ball in the sensing area to test for a response.
   • Locate Metal Case: Use this circular hole as the TEE position when the launch monitor has a protective cover.
   • Locate Monitor: Use this circular hole as the TEE position when the launch monitor does not have a protective cover.
   • Once the sensing area is determined, you can further calibrate the direction of your shots using the Alignment Stick. Position the Alignment Stick approximately 13.8 -19.7 inches {35cm to 50cm) in front of the sensor lens (you can use the Alignment Stick for a rough measurement). The direction of the Alignment Stick represents the target direction of the shot.
   • Open the app and connect to the launch monitor. On the device interface, you will find the entry point. Tap on it to proceed.
   • The Alignment Stick represents the target direction of the shot. You can make slight adjustments to the sensor’s orientation. Observe the angle between the yellow horizontal line and the white dashed line on the screen, which should be within ±0.5°. This indicates that the direction calibration is complete. Tap “Finish” to exit.
5. Software Compatibility
   • The GDS Plus launch monitor is compatible with the GOLFJOY Lite App and GreenJoy software.
   • Download the GOLFJOY Lite APP
   • Download the GOLFJOY Lite APP from the Apple Store or Android Store. Or scan the following QR code. To learn how to use it, please visit www.golfjoy.com.
   • Measurable Data
   • Download GreenJoy / GOLFJOY Software
   • Please visit www.golfjoy.com for the user manual.
6. How to connect to the PC Software
   • Step 1: Turn on your computer, and press the Win+R key combination to open the “Run” dialog box. Type “ncpa. cpl” and click “OK” to access the network connections interface.
   • Step 2: In the network connections interface, locate the network icon.
   • If your computer has two Ethernet ports, one connected to the external network and the other to the launch monitor, you’ll see an icon labeled “Unidentified Network.” Right-click on this network icon and select “Properties” as shown in the image below.
   • If your computer has only one Ethernet port, connect a Wi-Fi device to enable internet access while using the launch monitor. Right-click on the network icon and select “Properties” following the same steps.
   • Step 3: Double-click to select the “Internet Protocol Version 4(TCL/1Pv4)”.
   • Step 4: Set the IP address to 192.168.1.XXX (XXX should be between 2 and 255, excluding 147).
   • Step 5: Power on the Launch Monitor. Press the ON/OFF switch. A blue light indicates a successful startup.
   • Step 6: Check the connection status. Click the settings button at the bottom right corner of the homepage, then select “About.” If the connection is successful, you will see “GDS Plus” displayed. If not, the connection has not been established.
7. GreenJoy + GDS Plus
   • Step 1: Turn on your computer, and press the Win+R key combination to open the “Run” dialog box. Type ” ncpa. cpl” and click “OK” to access the network connections interface.
   • Step 2: In the network connections interface, locate the network icon.
   • If your computer has two Ethernet ports, one connected to the external network and the other to the launch monitor, you’ll see an icon labeled “Unidentified Network.” Right-click on this network icon and select “Properties” as shown in the image below.
   • If your computer has only one Ethernet port, connect a Wi-Fi device to enable internet access while using the launch monitor. Right-click on the network icon and select “Properties” following the same steps.
   • Step 3: Double-click to select the “Internet Protocol Version 4(TCL/1Pv4)”.
   • Step 4: Set the IP address to 192.168.1.XXX (XXX should be between 2 and 255, excluding 147).
   • Step 5: Power on the Launch Monitor. Press the ON/OFF switch. A blue light indicates a successful startup.
   • Step 6: Check the connection status. Open the client and navigate to “Settings” > “General Settings.” Enable the “Version” option. If the launch monitor is connected successfully, the version number will be displayed in the top right corner. You can log in and start playing golf.
8. How to Connect 3-party Software
   • Connecting E6
   • Visit the E6 website at https://e6golf.com/update/ and follow the website instructions to download the E6 Connect.
   • After the download is complete, double-click the installation package to start the installation.
   • Visit the GOLFJOY website to download the E6 compatibility program. Double-click the downloaded file and follow the prompts to install it.
   • Once the installation is successful, you will see both the E6 CONNECT and Greenjoylntl shortcut icons on your desktop.
   • Delete the E6 Connect icon and double-click the GreenJoylntl icon to automatically open E6. From now on, when using GDSPLUS+E6, you will access it through this shortcut.
   • Modify your computer’s network settings.
   • With your computer turned on, press the Win+R key combination to open the following window, then type “ncpa. cpl” and click OK to access the Network Connections interface.
   • In the Network Connections interface, you will see network icons. If your computer has two network ports, one connected to the external network and the other connected to the sensor, you will see a network icon labeled “Unidentified network.” Right­click on that network icon and select Properties.
   • If your computer has a single network port, please have a Wi-Fi device installed on your computer so that you can connect to the internet while using the sensor. The steps are the same: right-click on the network icon and select Properties.
   • Double-click to select the content.
   • Set the IP address to 192.168.1.XXX {XXX should be a number between 2 and 255, but not 147).
   • Power on the sensor: Press the ON/OFF button. When the button emits a blue light, it means the sensor has started.
   • Double-click the GreenJoylntl shortcut on your desktop to launch E6.
   • After activating your account in the E6 interface, go to Settings -> Simulator -> Tracking System and select Greenjoy.
   • Once you enter the Driving Range, place the ball in the sensing area. You will see the “Ready” message, indicating that you can start using it.

Connecting GSPRO

• Visit the GSPRO website at https://gsprogolf.com/ and download the software.
• Follow the installation instructions provided on the GSPRO website to install and configure the license. The license can be purchased or obtained by contacting GSPRO directly. When purchasing, select the “Other/OpenAPI” option.
• Install the GSPRO adapter program. Visit the website www.golfjoy.com or contact Golfjoy customer support for assistance. Double-click the installation package and follow the prompts until the installation is complete. A shortcut icon will be created on your desktop.
• Modify your computer’s network settings.
• With your computer turned on, press the Win+R key combination to open the following window, then type “ncpa. cpl” and click OK to access the Network Connections interface.
• In the Network Connections interface, you will see network icons. If your computer has two network ports, one connected to the external network and the other connected to the sensor, you will see a network icon labeled “Unidentified network.” Right­click on that network icon and select Properties.
• If your computer has a single network port, please have a Wi-Fi device installed on your computer so that you can connect to the internet while using the sensor. The steps are the same: right-click on the network icon and select Properties.
• Double-click to select the content.
• Set the IP address to 192.168.1.XXX {XXX should be a number between 2 and 255, but not 147).
• Power on the sensor: Press the ON/OFF button. When the button emits a blue light, it means the sensor has started.
• Double-click the GSProAdapter icon on your desktop to launch GSPRO and start using it.

Some important notes for the first-time use of GSPRO

• If a configuration window pops up in GSPRO, select “OpenAPI.”
• When running GSPRO subsequently, do not close its API connect window, as it will disrupt communication with GSPRO (you can minimize it).
• If double-clicking GSproAdapter doesn’t start GS PRO, please follow these steps:
  • Right-click the GS Pro launch icon and choose “Open file location.”
  • Check the path of the GS Pro launch icon.
  • Right-click the GSProAdapter icon and choose “Open file location.” Locate the Config file.
  • Compare the path of the GS Pro launch icon with the username in the Config file (typically “Public” but may vary). If the names do not match, directly modify the username in the Config file.
  • After making the modifications, choose “Save As” to save the file. Do not choose “Save” directly. Then, overwrite the original Config file with the saved file.
  • Double-click GS Pro again to attempt to launch it.

Product Upgrade

You can upgrade the GDS Plus using the GOLFJOY Lite App and Greenjoy software when a new version is available.

1. Via GOLFJOY Lite App
   • The upgrade button appears after the Bluetooth connection on the device page.
   • Connect the launch monitor to the internet using an Ethernet cable.
   • Ensure the launch monitor is connected to the internet and click “Upgrade” on the firmware update page.
   • Do not close the App or turn off the launch monitor during the upgrade process.
2. Via GreenJoy Software
   • Connect the device to the GreenJoy software and click “Upgrade Now”.
   • Do not close the software or turn off the launch monitor during the upgrade process.
3. Via GOLFJOY Software
   • Connect the device to the GOLFJOY software and click “Upgrade”.
   • Do not close the software or turn off the launch monitor during the upgrade process.

Important Notices

• The device will enter sleep mode if not used for 5 minutes. Simply tap the ball to wake it up. If it remains inactive for 1 O minute, it will automatically power off.
• Avoid exposing the camera to direct sunlight during operation.
• Official website: https://www.golfjoy.com/.
• E-mail: support@golfjoy.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>