Fashome KCK01A Cordless Temperature Control Kettle Instruction Manual

Fashome KCK01A Cordless Temperature Control Kettle

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and/or personal injury.

• Always ensure your hands are dry before handling the plug or switching on the kettle.
• Always use the kettle on a secure, dry, and level surface.
• Always store the excess portion of the power cord in the base unit. Always carry out regular checks of the power cord to ensure no damage is evident. Should there be any signs that the cord is damaged
• in the slightest, the entire appliance should be returned.
• Always return the kettle after a malfunction, or if it has been damaged in any manner.
• Always exercise caution in carrying the kettle when it is full of boiling water and when pouring.
• Always avoid excessive tilting of the kettle after filling.
• Always beware of steam being emitted from the spout or lid especially during refilling.
• Always unplug the kettle from the socket after use and before cleaning. Always allow the kettle to cool before cleaning and storing.

Caution: This appliance generates heat during use. Adequate precautions must be taken to prevent the risk of burns, scalds, fires or other damage to persons or property caused by touching the exterior while in use or during cooling.

• Never touch hot surfaces.
• Never use this kettle outdoors. Never use this appliance for anything other than its intended use. This kettle is for household use only.
• Never use the kettle to heat anything other than water.
• Never immerse any part of the kettle, power base or cord, and plug in water or any other liquid to protect against electrical hazards.
• Never use harsh, abrasive or caustic cleaners to clean the kettle.
• Never allow children to use this kettle. Close supervision is necessary when the kettle is used near children. Never leave the kettle unattended when in use.
• Never open the lid during the boiling cycle.
• Never fill above the MAX mark as hot water may be ejected.
• Never allow the kettle to boil dry. If the kettle does boil dry, allow it to cool, unplug it and refill it with cold water. Never fill the kettle when it is positioned on the power base. Never place the kettle on or
• near a hot gas or electric burner or where it could touch a heated oven or microwave oven.
• Never use a power base other than the one supplied with the kettle.
• Never insert any object into any slots or holes of the kettle.
• Never operate the kettle with a damaged cord or plug or after a malfunction or if it has been dropped or damaged in any manner.

PRODUCT DIAGRAM

1. Spout
2. Handle
3. Digital Display
4. Power Base
5. Cover
6. Inner Pot

Pre-setted Keep Warm temperature 105℉-155℉-175℉-195℉. The previously selected temperature is stored in memory. Press the Start/Cancel button to start or cancel boiling water. Press the Keep Warm button to activate the Keep Warm function. The default Keep Warm time is 120 minutes.

SPECIFICATIONS

BEFORE USING YOUR KETTLE

1. Remove the kettle from the packaging and position it on a dry, level, secure workplace.
2. Before connecting it to a power source, make sure that your power voltage is the same as the one indicated on the base of the kettle. Connect the cord to a suitable power socket. Make sure that the power cord does not overhang the work surface.
3. Remove the kettle from the power base and filling the kettle with water to the MAX mark. Make sure the kettle is not over-filled. Always compare the water level against the water tank markings with the kettle positioned on the power base.
4. Close the lid and place the kettle back onto the power base.
5. Press the Start/Cancel button.

Allow the kettle to boil the water and then discard it. Repeat this procedure twice. This will remove any residue left from the manufacturing process.

USING YOUR KETTLE

Conventional Boiling

1. With the kettle switched off, plug the power cord into a suitable power socket for power testing. The kettle will beep and the display will show the current temperature.

2. Remove the kettle from the power base and open the lid for filling the kettle with water. Do not fill the kettle through the spout.

3. Position it back on the power base. Make sure that the water level doesn’t exceed the MAX marking on the water carafe.
   Warning: If this kettle is filled above the maximum level mark, hot water may be ejected from the spout during boiling.

4. When the water reaches boiling point, the kettle will beep and finally automatically turn off.

5. To cancel or interrupt boiling, either press the boil button or lift the kettle off of the power base.

For High Altitude Users

USING YOUR KETTLE

Keep Warm Mode
The Keep Warm button can be used to select one of four temperatures 105°F / 40°C, 155°F / 68°C, 175°F / 79°C and 195°F /90°C. The keep-warm mode will maintain the selected water temperature for 2 hours.

1. Press the Keep Warm button to choose the desired temperature.

2. The Keep Warm button will illuminate with one beep, and then the kettle will slowly heat the water to the selected temperature. Note that the water will not be heated as quickly as when the boil function is used. The display will show the actual water temperature according to the temperature you selected It is normal for the displayed temperature to fluctuate a few degrees on either
   side of the set temperature.

3. Once the water has been heated to the selected temperature, the kettle will enter keep warm mode and will occasionally switch on and off in order to maintain the selected temperature.

4. To cancel the keep warm mode, either press the Start / Keep Warm button or lift the kettle off of the power base.

TO HEAT WATER: There are 2 options

1. If you wish to start a boil cycle, press the “Start” button.
   212°F / 100°C appears directly on the screen, the kettle beeps and starts heating the water. The kettle beeps twice once the water temperature reaches 212°F / 100°C.

2. If you wish to select the desired temperature ‒ 4 possible settings: 105°F /40°C – 155°F / 68°C – 175°F / 79°C – 195°F / 90°C ‒ press the Keep Warm button until it displays the temperature you wish to select. The selected temperature blinks twice and then stays still. The kettle beeps and the kettle starts heating the water.

3. You can monitor the live temperature of the water on the screen.
   Once the selected temperature is reached, the kettle beeps twice and stops heating.
   PLEASE NOTE
   The screen automatically switches off after 25 seconds ‒ unless you have selected the keep warm mode ‒ but pressing any key will turn the screen on again anytime. If you select 195°F and activate the keep warm function, the kettle keeps the temperature to 195°F during 120mn.

4. If the temperature of the water in the kettle is higher than the temperature you select when pressing the keep warm button, the heating won’t start.
   For instance, if the water temperature is 195°F, you won’t be able to launch the heating by selecting 105°F, 155°F or 175°F.

Boil Then Keep Warm Mode
The kettle can be set to boil the water and then keep it at the selected temperature for up to two hours.

1. Press the Keep Warm button until the dot (•) on the display is lined up with the desired temperature.
2. When the water reaches the temperature, it will beep twice and automatically switch off. The temperature of the water will then start to drop until it reaches the set temperature during step 1. This may take some time. The kettle will then enter keep warm mode and will occasionally switch on and off to maintain the water at the selected temperature.
3. The display will show the temperature of the water during boiling and the keep warm period. Note that it is normal for the displayed temperature to fluctuate a few degrees on either side of the set temperature.
4. If a low temperature is selected, the kettle may not have sufficient time to cool down to this temperature during the 2-hour keep warm period.
5. To cancel the boil procedure or the keep warm mode, either press the boil button or lift the kettle off of the power base Recommended temperatures:
   • 158°F: white tea
   • 176°F-185°F : green tea
   • 194°F : freshly ground coffee
   • 203°F : black tea
   • 212°F : boiling water/infusions

THE KETTLE WILL SWITCH OFF AUTOMATICALLY
As soon as the water reaches boiling point or the chosen temperature. Do not leave water in the kettle after use as this quickens the formation of scale.

USING YOUR KETTLE

Although all teas actually come from the same bush (camellia sinensis), their taste and type vary according to their region of production, method of processing (different fermenting, and drying processes and rolling techniques exist) and grade (whole or broken leaves, fannings and dust).

• Green tea: Rolled dried leaves, which are chopped and lightly roasted to prevent them from fermenting. Leave to brew for 3 minutes only. Green teas are subtle- flavoured, often bitter, and very pale in color.
• Black tea: Made from older leaves that are rolled, dried, and fermented for a considerable period. Brew for 5 minutes (or longer for Turkish or Russian tea). Gives a powerful taste and a superb coppery color.
• Oolong tea: Midway between green and black tea. Slightly fermented. Brew for 7 minutes. Lighter in taste and paler than black color.
• Although purists drink tea plain, you may prefer to add cold milk to your cup before pouring in the tea (with Indian or Ceylon tea) or add sugar and then lemon (with green or flavouredteas).

Tuya Smart App
You can access more features using the Tuya App

Downloading Tuya Smart App
To download the Tuya Smart App, scan the QR code or Search for Tuya in the App Store.

Note
Choose “Allow” for the permissions requested when opening the Smart Life App for the first time permissions allow the app’s features to function normally and are not used to record personal, private information. Due to ongoing updates, the Smart Life App may be slightly different than shown in this manual in case of any differences always follow the in-app instructions

CLEANING

Warning: Always unplug the kettle from the socket and allow it to cool completely before cleaning or descaling it.

1. Clean the exterior surface of the kettle with a damp cloth and then polish it with a soft dry cloth. Do not use steel wool pads or harsh/abrasive cleaners, which may damage the body.
2. Do not immerse the power base or power cord in water or liquid of any kind.
3. This kettle features a concealed heating element which means it never comes into contact with the water inside the kettle. This hygienic design not only makes cleaning the inside of the kettle much easier, it also keeps cleaning to a minimum.
4. Although the kettle is designed for the element to remain scale-free, in hard water areas, the scale may still build up on the base. Therefore, it is very important that you descale regularly using a proprietary descaler. Not doing so will spoil the appearance and efficiency of the kettle and could result in the failure of the appliance. Not descaling as advised could void your warranty.
5. Use a proprietary descaling product and always follow the manufacturer’s instructions carefully when descaling the kettle.

To de-scale your kettle
Using white vinegar which can be bought from hardware stores: ‒ Fill the kettle with ½ litre of white vinegar, ‒ Leave to stand for 1 hour without heating.
Using citric acid:

• Boil ½ litre of water,
• Add 25 g of citric acid and leave to stand for 15 min.

IN THE EVENT OF PROBLEMS

THERE IS NO EVIDENT DAMAGE TO YOUR KETTLE
The kettle does not work

• Check that your kettle is properly connected.
• he kettle has been switched on without water or an accumulation of scale has caused the overheat cut-out to operate: allow the kettle to cool and fill it with water.
• Descale first if the scale has accumulated.
• Switch it on the kettle should start working again after about 15 minutes.

IF YOUR KETTLE HAS BEEN DROPPED, IF IT LEAKS OR IF THERE IS VISIBLE DAMAGE TO THE POWER CORD, THE PLUG, OR THE BASE OF THE KETTLE
Return your kettle to your After-Sales Service Centre, only they are authorized to carry out repairs. See the guarantee conditions and list of centers in the booklet supplied with your kettle. The type and serial number are shown on the bottom of your kettle. This guarantee covers manufacturing defects and domestic use only. Any breakage or damage resulting from failure to comply with the instructions for use is not covered by the guarantee.

• The manufacturer reserves the right to modify the characteristics or components of its kettles at any time in the interests of the consumer.
• Do not use the kettle if damaged. No attempt must be made to dismantle the kettle or its safety devices.
• If the supply cord is damaged, it must be replaced by the manufacturer, its after-sales service center or a similarly qualified person, in order to avoid any danger.

PREVENTION OF DOMESTIC ACCIDENTS
For a child, a burn or scald, even if slight, can sometimes be serious. As they grow up, teach your children to beware of hot liquids to be found in the kitchen. Position the kettle and its supply cord well to the rear of the work surface, out of the reach of children. If an accident does occur, run cold water over the scald immediately and call a doctor if necessary. In order to avoid any accident: do not carry your child or baby at the same time as drinking or carrying a hot drink.

CONTACT INFORMATION
Please read the entire instruction manual thoroughly before operating your kettle. If you have questions after reading the enclosed information, please contact Fashome after Customer Service for assistance.
Xiamen Sunled Electric Appliances Co., Ltd
2nd Floor, No. 2-1, Jixiang West Road, Xinmin Town, Tongan District,
Xiamen,Fujian,China 361100
www.isunled.com
Tel: 0086-592-5985640
MP: 0086-15359281561
Email: [email protected]

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician forhelp.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

References

• Isunled Group

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>